STC ST04536NY

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the Original Product – Type Certificate Number: Make:

By Direction of the Administrator Signature Title Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance and Airworthiness Division Aircraft Certification Service IMPORT ST04536NY Mid Canada Mod Center 2450 Derry Road East, Hanger #9 Mississauga, Ontario L5S 1B2 25 Federal Aviation Regulations.

A35EU A310, Model 304 and A310, Model 324

1. Installation of the CMC 9000 Flight Management System must be in accordance with Transport Canada Civil Aviation (TCCA) approved Avionics Design Services Ltd. Master Drawing List MDL11102 Revision X, TCCA approved on March 6, 2020, or later TCCA approved revisions.

2. Operation of the CMC 9000 Flight Management System must be in accordance with TCCA approved Mid Canada Mod Center Flight Manual Supplement FMS11102-1 Revision F, TCCA approved on December 4, 2018 or later TCCA approved revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The "Limitations" section of the Mid Canada Mod Center Flight Manual Supplement FMS11102-1 Revision F, TCCA approved on December 4, 2018 or later TCCA approved revisions is applicable as part of this installation.

2. The "Airworthiness Limitations" section of the Mid Canada Mod Center Instructions for Continued Airworthiness ICA11102-1 Revision N, dated February 26, 2020 or later TCCA accepted revisions is applicable as part of this installation.

(See Limitations and Conditions Continued on Page 3 of 3) October 16, 2020 Airbus June 23, 2020 September 30, 2020

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

3 ST04536NY

FAA Form 8110-2 (5/14) Page 3 of Date Reissued: October 16, 2020

Description of Type Design Change (continued):

3. Maintenance of the CMC 9000 Flight Management System must be in accordance with TCCA accepted Mid Canada Mod Center Instructions for Continued Airworthiness ICA11102-1 Revision N, dated February 26, 2020 or later TCCA accepted revisions.

3. The installer must determine whether this design change is compatible with previously approved modifications.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Note: This STC does not require a revised Electrical Wiring Interconnection System (EWIS) Instructions for Continued Airworthiness (ICA).

----------END----------

3 ST04536NY