STC ST09806AC

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title 3 ST09806AC SJT Aerospace Corporation 16517 E 122nd St. N Collinsville OK 74021 Federal Aviation Regulations 25 Configuration -001: Structural considerations to include the installation of metallic beams to support mounting various interior components. Modification of the aircraft to be accomplished in accordance with Sturctures Data List SJT-DL-B737-1, Revision IR, dated June 11, 2013, or later FAA approved revision. This installation must be maintained in accordance with SJT Aerospace Instructions for Continued Airworthiness SJT-ICA-B737-1, Rev. IR, dated March 21, 2013, or later FAA accepted revision.

Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Scott A. Horn Manager, Fort Worth Aircraft Certification Office Southwest Region Boeing 737-700IGW

July 2, 2015 September 18, 2012 July 10, 2013 A16WE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 ST09806AC

FAA Form 8110-2 (5/14) Page 3 of

3 Configuration -002: Structural considerations to include the installation of metallic beams to support mounting various interior components. Modification of the aircraft to be accomplished in accordance with Structures Data List SJT-DL-B737-3, Revision IR, dated June 1, 2015 or later FAA approved revision. This installation must be maintained in accordance with SJT Aerospace Instructions for Continued Airworthiness SJT-ICA-B737-2, Rev. IR, dated February 25, 2015, or later FAA accepted revision.

-END-

ST09806AC