STC ST10710DS

Supplemental type certificate · L-3 Communications Integrated Systems LP

Holder
L-3 Communications Integrated Systems LP · United States
Status
Current · Issued
Status date
November 15, 2019
Applied
November 11, 2017
Product
Aircraft · Large Airplane
Certification basis
Part 21, Part 25
Data sheet
TCDSA2NM

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a non-essential, non-required document center powered by a solid state power distribution system

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number ST10710DS

This certificate issued to: L-3 Communications Integrated Systems L.P.

10001 Jack Finney Blvd.

Greenville, TX 75402

Part 25 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: A2NM Make: The Boeing Company Model: 757-200

Project 10562-1 Installation of a non-essential, non-required document center powered by a solid state power distribution system on a Boeing 757-200 in accordance with (1) L-3 Communications Integrated Systems L.P. Sealed Drawing List 10562-1 Revision NC, dated 15 November 2019, (2) L-3 Communications Integrated Systems L.P. Instructions for Continued Airworthiness (ICA), Document No. G10562.28.08 Revision -, dated 01 Oct 2019 or later FAA/ODA approved revisions of (1) and/or (2).

(Limitations and Conditions continued on page 3 of 4)

Date of application: 11 Sept 2017 Date reissued:

Date of issuance: 15 Nov 2019 Date amended:

Signature

Title ODA-750173-SW Administrator Page 1 2 3 4 Amdt

FAA Form 8110-2 (5/14) Page 1 of 4

To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 2 of 4

Number: ST10710DS Date of Issuance: 15 November 2019 Limitations and Conditions: (Continued)

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.

Certification Basis:

Based on 14 CFR §§ 21.115 and §§ 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for The Boeing Company 757-200 aircraft is as follows:

a. The type certification basis for The Boeing Company 757-200 series airplanes is shown on TCDS A2NM for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, 11 Sept 2017, is as follows:

(Certification Basis continued on Page 4 of 4)

FAA Form 8110-2 (5/14) Page 3 of 4

Number: ST10710DS Date of Issuance: 15 November 2019 Para. Amdt. Para. Amdt.

25.21(a) 25-42 25.803(a) 25-32

25.23(a)(b) 0 25.803(d) 25-46

25.29(a)(b) 25-42 25.813(d) 25-32

25.301(a)(b) 25-23 25.853(b)(b-2) 25-32

25.303 25-23 25.981(a) 25-102

25.305(a)(b) 25-23 25.1301(a)(b)(c)(d) 0

25.307(a)(c) 25-23 25.1309(a)(b)(c)(d)(g) 25-41

25.561(b)(c) 25-23 25.1351(a) 25-41

25.601 0 25.1353(a)(b) 25-42

25.603(a)(b) 25-38 25.1357(a)(c)(d)(e) 0

25.605 0 25.1359(d) 25-32

25.609(a) 0 25.1431(a)(c) 0

25.613(a)(b)(e) 0 25.1529 25-54

25.615(a) 25-23 25.1541(a)(b) 0

25.619(a) 25-23 25.1557(a) 25-38

25.625(a) 25-23 26.11(c) 0

25.787(a)(b) 25-38

25.789 25-32

-------------------------------------------------END-----------------------------------------------

FAA Form 8110-2 (5/14) Page 4 of 4

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
The Boeing Company757-200 SeriesA2NM