What it approves
Antenna Removal must be in accordance with Boeing Ireland Limited Change / Repair Approval Number BIL-00243-APP, Revision 00, dated September 16, 2024, or later EASA approved revisions. This change deactivates and removes a Global Communications Suite (GCS) system installed by FAA Supplemental Type Certificate (STC) ST02908NY (EASA STC 10059775).
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT ST11853IB
BOEING IRELAND LIMITED LEVEL 3 EAST, CLOGHRAN HOUSE
DUBLIN AIRPORT
DUBLIN AIRPORT K67 F3X2 IRELAND Part 25 Title 14 Code of Federal Regulations A16WE 737-800 Series The Boeing Company
1. Antenna Removal must be in accordance with Boeing Ireland Limited Change / Repair Approval Number BIL-00243-APP, Revision 00, dated September 16, 2024, or later EASA approved revisions. This change deactivates and removes a Global Communications Suite (GCS) system installed by FAA Supplemental Type Certificate (STC) ST02908NY (EASA STC 10059775).
(See Description of Type Design Change Continued on Page 3 of 3)
1. The installer must determine whether this design change is compatible with previously approved modifications.
(See Limitations and Conditions Continued on Page 3 of 3) October 25, 2024 December 2, 2024 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3
IMPORT ST11853IB 3
IMPORT ST11853IB Date of Issuance: December 2, 2024
Description of Type Design Change (continued):
2. Maintenance must be in accordance with Boeing Ireland Limited Instructions for Continued Airworthiness (ICA) Number BIL-00243-ICA01, Revision 02, dated September 11, 2024, or later EASA accepted revisions.
2. Maintenance must be in accordance with Boeing Ireland Limited Airworthiness Limitations (AWL) Supplement Number BIL-00243-AWL01, Revision 01, dated May 23, 2024, and Maintenance Planning Document (MPD) Supplement Number BIL-00243-MPD01, Revision 01, dated May 23, 2024, or later EASA approved revisions.
3. Supplemental structural inspections are established for this change, refer to MPD and AWL referenced under the Limitations and Conditions section of this STC for further information.
4. This STC is applicable to serial numbers as listed in Boeing Ireland Limited Change / Repair Approval referenced in the Description of Type Design Change of this STC.
5. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
----------END----------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 737-800 Series | A16WE |