What it approves
ONE ONLY STC. SN 5213: Non-Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0023, Rev. A, dated February 1, 2008, or later FAA-approved revisions.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number ST01360SE
This certificate, issued to AeroMech Incorporated 1616 Hewitt Avenue, Suite 312 Everett, WA 98201
Part 25 of the Federal Aviation Regulations.
Original Product⎯Type Certificate Number: 2A15 (Revision 11) Make: Lockheed Model: 1329-25 (Jetstar II), Serial Number 5213
Description of the Type Design Change: Non-Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0023, Rev. A, dated February 1, 2008, or later FAA-approved revisions.
Limitations and Conditions: The Instructions for Initial and Continued Airworthiness, document AMI-STC-JS-5213, Rev. “New,” dated December 30, 2004, or later FAA-approved revision is a required part of this STC.
The Airplane Flight Manual Supplement (AFMS) for the Lockheed Model 1329-25 (Jetstar II) airframe Serial Number 5213, AeroMech Document AMI-03-5213S, Rev. A, FAA- approved March 3, 2008, or latest FAA-approved revision is required on-board for operation of these aircraft.
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Lockheed Model 1329-25 (Jetstar II), Serial Number 5213, only.
A copy of this certificate must be maintained as part of the permanent records of the aircraft. If the holder agrees to permit another person to use this certificate the holder shall give the other person written evidence of the permission.
Date of application: December 11, 2003 Date reissued:
Date of issuance: January 15, 2004 Date amended: March 3, 2008
(Signature)
Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Lockheed Martin Corporation | 1329-25 | 2A15 |