- Holder
- Fairchild Industries Inc.
- Revision
- 0
- Status
- Current
- Product
- Aircraft · Small Airplane
- Models
- 1
- Registered
- 5 aircraft
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| 22 C7B |
Airworthiness directives · 1
ADs whose products are models on this data sheet, matched by model and maker.
Registered aircraft
Registry models that point at this data sheet, with their registered aircraft.
STCs approved under this data sheet · 3
STC SA04652CHTo allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specificationSTC SA01734SEApplication of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail surfaces, control surfaces and related parts.STC SA4302NMInstallation of Electronics Int'l digital automatic engine analyzer.
What the data sheet saysOCR
This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers.
MODELS: Pairchild 22 C7B, 2 POLM
T.C. NUMBER: ATC 483
Engine Menasco C-4 125 hp
Fuel 30 gallons (1 in CS 9 gallons and 1 in fuselage
21 gallons)
Oil 2-1/2 gallons
No. passengers
Baggage 50 1bs. (Pay load includes 2 parachutes 20 1bs. each)
Standard weight 1750 1bs.
Spec. basis Approved Type Certificate NO. 483
Serial Nos. 1500 and up manufactured prior to 7/1/35 eligible.
Approval expired as of that date.
Class I equipment:
101. 6.50-10 wheels and tires
102. Propeller - wood
Class III equipment: (*Denotes net increase)
301. Pairchild shock absorber strut No. 3340
instead of Warner strut
302. 19x9-3 tires Net decrease 11 1bs.
303. Sport type landing gear with
(a) 6.50-10 tires 14 1bs. *
(b) 19x9-3 tires (See NOTE 2) No change in weight
304. 8x4 tail wheel (Goodyear)
305. Propeller - fixed metal 24 1bs.*
306. Flares 20 1bs.
307. Starter and battery (baggage to be
reduced 29 1bs.) 50 1bs.
NOTE 1. Eligible with either two piece wing or the continuous spar type.
Aircraft equipped with the old type aileron hinges without ball bearings
also eligible with the hinges reamed out and 5/16 inch bolts installed
instead of 1/4 inch bolts.
NOTE 2. Sport type landing gear has Vee strut fairing and wheel streamlines.
Inspector should specify type installed.