- Holder
- American Aircraft Company
- Revision
- 0
- Status
- Current
- Product
- Aircraft · Small Airplane
- Models
- 1
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| Airster S1A | Formerly Security |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
STCs approved under this data sheet · 1
What the data sheet saysOCR
This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers.
AMERICAN AIRCRAFT COMPANY
MODELS: Airster S1A, 2 POL-SM
I.C. NUMBER: ATC 521
Engine Kinner K-5 100 hp
Fuel 23-1/2 gallons (one in fuselage)
Oil 3 gallons
No. passengers
Baggage Compartment in fuselage in rear of cockpit:
Landplane 50 1bs.; Seaplane 73 1bs.
(including anchor and rope 23 1bs.)
Standard weight Landplane 1775 lbs.; Seaplane 1936 1bs.
Spec. basis Approved Type Certificate No.
Serial Nos. 12 and up manufactured prior to 7-1-35
Approval expired as of that
(See NOTE 1)
Equipment (* Means net increase) :
Class I:
(a) Landplane
101. Propeller - wood (fixed pitch)
102.
103. 6 in. tail wheel with solid tire (full castering)
104- Folding wing mechanism
(b) Seaplane
151- Edo I-1836 floats with water rudder
Class III:
301. Exhaust collector ring
(a) Landplane 20 1bs.
(b) SeapLane 12 1bs.
302. Adj. metal propeller
(Seaplane only) 12 1bs.*
303. heywood starter 25 1bs.
Seaplanes must have dural strips installed on rear edge of each wing
(in front of aileron) and 1/2 inch added to leading edge of aileron by
means of a dural false leading edge properly blocked in at the ends and
hinge openings with wooden blocks secured in place.
z3 must have manufacturer s affidavit of conformity submitted wher
certilicatea as seaplane.