TCDS P-896

Page No. 1 2 Rev. No. 1 1 DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION P-896 Revision 1 HARTZELL HC-102Y October 12, 1956 PROPELLER SPECIFICATION Propellers of models described herein conforming with these specifications and approved data on file with the Civil Aeronautics Administration are rated as airworthy for use in certificated aircraft in accordance with pertinent aircraft specifications and applicable portions of the Civil Air Regulations, provided they are installed, operated, and maintained as prescribed by the manufacturer. Type Certificate Holder Hartzell Propeller, Inc. Piqua, Ohio Type Constant speed; hydraulic (see Note 3) Engine shaft Special flange 4" B.C. Hub material Aluminum alloy Blade material Aluminum alloy Number of blades Two Hubs eligible HC-102YF-1 (See Note 1.) Blades Eligible Maximum Continuous Takeoff Diameter Approx. Max. Wt. Complete (for reference only) (See Note 2) HP RPM HP RPM Limits (See Note 3) 8848-0 to 8848-8 240 2600 240 2600 88" - 80" (-0 to -8) 60 lbs. Certification basis Type Certificate No. 896 Production basis Production Certificate No. 10 issued to: Hartzell Industries, Inc. Piqua, Ohio NOTE 1. Hub Model Designation Hub model designation HC - 10 2 Y F - 1 A Denotes minor change not affecting eligibility L denotes left hand rotation Denotes specific design features (see Note 4) F denotes special flange, 4" BC Hartzell blade shank size Number of blades Identifies basic design Hartzell controllable NOTE 2. Blade model designation P-896 2 Blade model designation L 88 48 - 3 Number of inches cut off from basic diameter Basic model or template Basic diameter in inches Denotes left hand blade NOTE 3. Pitch Control. Eligible with the Hartzell constant speed control, which includes the Woodward X210XXX series governor models. Additional weight 4.5 lbs. NOTE 4. Not applicable. NOTE 5. Left-Hand Models. The left-hand version of an approved model propeller is eligible at the same rating and diameter as listed for the right-hand model. See Notes 1 and 2. NOTES 6, 7, 8, and 9. Not applicable. ....END....