- Holder
- Franklin Engine Company
- Revision
- 0
- Status
- Current
- Product
- Engine
- Certification basis
- Part 33
- Models
- 8
- Registered
- 2 aircraft
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 8
| Model | Also known as | Note |
|---|---|---|
| 4AC-199B2 | ||
| 4AC-199E4 (O-200-1) | ||
| 4AC-199D3 | ||
| 4AC3-199H3 (O-200-5) | ||
| 4AC-199E3 | ||
| 4AC-199D2 | ||
| 4AC-199B3 | ||
| 4AC-199E2 |
Airworthiness directives · 1
ADs whose products are models on this data sheet, matched by model and maker.
Registered aircraft
Registry models that point at this data sheet, with their registered aircraft.
STCs approved under this data sheet · 2
STC SE04651CHTo allow use of l00R grade aviation fuel meeting Swift Fuel, LLC specification SPEC-l00R-22STC SE02293NYONE ONLY STC: Modification of the engine propeller mounting shaft in accordance with Dennis Taylor Instructions and Requirements for Installation of Aeromatic Propeller on Franklin 4AC-199-E3 Engine Serial Number 200272
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
FRANKLIN ENGINE COMPANY
MODELS: Aircooled Motors Franklin 4AC-199 series
T.C. NUMBER: T.C. 226
Model - Franklin 4AC-199B2, B3 4AC-199D2, D3 4AC-199E2, E3,
E4 (O-200-1)
4AC3-199H3
(O-200-5)
Type 4HOA
Direct drive - - - - - - - - - - - -
Rating:
Maximum continuous,
hp, rpm, at S.L.
press. alt. 65-1950-S.L. 85-2500-S.L. 90-2500-S.L. 113-3500-S.L.
Take-off, hp, rpm,
full throttle 65-1950 85-2500 90-2500 113-3500
Fuel (minimum octane
aviation gasoline) 73 - - - - 80 - - - -
Bore and stroke, in. 4.25 x 3.50 - - - - - - - - - - - -
Displacement, cu. in. 199 - - - - - - - - - - - -
Compression ratio 6.0: 1 6.3: 1 7.0: 1 - - - -
C.G. location (with
all accessories)
Forward of rear
mount C.L., in. 5.7; 3.7 - - - - 5.7; 3.7; 2.7 4.6
Weight (dry), lbs. 190; 197 190; 197 190; 197; 202 224
Propeller shaft Integral flanged
hub 6-3/8 in.
bolts, 4 in. circle - - - - - - - - SAE No. 10
Carburetion Marvel MA-3P
carburetor with
1-5/16 in.
venturi
Marvel MA-3 or
MA-3A
carburetor with
1-3/8 in. venturi
- - - - Marvel MA-3SPA
carburetor with
1-5/8 in. venturi
Ignition, dual Eisemann A M-4
(unshielded) or
LA-4 (shielded)
magnetos with
impulse coupling
(retard 25
degrees)
- - - - - - - - - - - -
Ignition timing,
deg. BTC 26 30 26 or 28 32
Spark plugs Champion AJ-66 ,
C-10-S, 78S;
Simmonds-
Benton 4D3-S;
AC-SA-47,
Auto-Lite A5-B
or A4-S
- - - - - - - - - - - -
Oil sump capacity,
quarts 5 - - - - - - - - - - - -
Certification basis Type Certificate No. 226 (See NOTE 4)
NOTE 1. Maximum permissible cylinder head, cylinder barrel and oil inlet temperatures 550 degrees F.,
330 degrees F., and 240 degrees F., respectively, for all models except the 4ACG-199H Series whose
limits are 500 degrees F., 300 degrees F., and 213 degrees F., respectively.
NOTE 2. The following accessories are eligible for use on the specified engine models at the indicated
additional weights:
Accessory Weight (lbs.)
Generator
Auto-Lite GDY or GAS (6 or 12 volts - Models B3, D3, E3, H3 only) 12
Auto-Lite No. 10621 or 11496 and 10622 or 11497 (both used - Model E4 only) 26
Starter
Auto-Lite MBG or MZ (models B3, D3, E3, E4, H3 only) 16
Delco-Remy No. 10750 (Model E4 only) 16
Fuel Pump
AC No. 10551 3
Hydraulic Pump
Pesco 194-C (Model E4 only) 3
Vacuum Pump
Pesco 194-C (Model E4 only) 4
Miscellaneous
8 quart finned oil sump (included in weight of H3) 2
Fram P-1/2 or PB-1/2 oil filter - -
AC Air cleaner Part No. 1529 265 (for all except engine Model H3) - -
The following accessory drives are provided.
Accessory
Nearest AN
Pad
Designation
Direction of
Rotation, C
= Clockwise
CC =
Counter-
clockwise
Drive Speed
X
Crankshaft
RPM
Maximum Torque
(in. - lbs.)
Continuous Static
Maximum
Overhang
Moment (in.
- lbs.)
Starter None CC 11.444: 1 - - 240 30
*Generator None CC 1.000: 1 8 15 45
**Generator None CC 1.080: 1 8 15 45
Tachometer AND 10005 CC 0.500: 1 20 60 2
Hydraulic or
vacuum
pump AND 10000 C 1.000: 1 75 300 25
*All except 4AC-199-E4
**4AC-199-E4 only
NOTE 3. The corresponding model designations of military models installed in certified aircraft must be
incorporated on the engine nameplate at least by the first overhaul period.
NOTE 4. Approval for all models expired 11/5/50. No engine of these models manufactured after the
date shown below or with serial numbers above those listed are eligible for use in certificated aircraft.
Model Date Serial No. Model Date Serial No.
4AC-199-B2,
B3
1/6/42 200838 4AC-199-E3 5/9/46 201583
4AC-199-D2 5/11/42 200858 4AC-199-E4 11/18/42 201092
4AC-199-D3 9/27/44 201591 4ACG-199-H3 7/2/43 201505
4AC-199-E2 11/10/42 201116