TCDS TC 246

HAMILTON STANDARD 3E PROPELLER T.C. 246 туре Hydraulically controllable not feathering (see NOTES 3 and 4) Blade shank Engine shaft SAE No. 50 or X (X indicates special shaft sizes for foreign engines are eligible) Hub material Steel 3lade material Aluminum alloy Number of blades runs egole ЗЕ50, ЗЕ40, ЗЕХ, S8452, 50001, 50045, and 50300 (see NOTE 1) Maximum Propeller Weight Complete 1a0e8 i00e Continuous Takeoff Diameter (Max. Diameter) HP RPM HP RPM Limits (1b.) NOTES 6091A-0 1050 1790 1200 1969 10'6-1/4" - 8'6-1/4" 310 6091A-24 10010-24 6092A-0 is the left hand bersion of 6091A-0 6103A-0 6103A-18 1050 1700 1200 1870 11'6-04 10 '1/4" 313 6104A-0 is the left hand version of 6103A-0 6105A-0 1050 1790 1200 1969 356 6105A-24 Telescoped to 10'4i (-33T) 6106A-0 is the left hand version of 6105A-0 6111A-0 1050 1700 1200 1870 11'6-1/4' 10'1/4" 338 6111A-18 (-0 to - 18) 6112A-0 is the left hand version of 6111A-0 6157A-0 1050 1790 1200 1969 10'6-1/4" - 8'6-1/4" 310 6157A-24 (-0 to - 24) 6158A-0 is the left hand version of 6157A-0 6227A-0 1050 1790 1200 1969 10'6-0/40 - 2816-3/4" 310 6227A-24 6228A-0 is the left hand version of 6227A-0 6249A-0 to 1050 1790 1200 1969 13'1/4' 1-0 to - 2"1/4 356 6249A-24 6250A-0 is the left hand version of 6249A-0 Certification Basis Type Certificate No. 246. That date fittee use or pere cated a rare.) No propellers of this model manufactured after NOTE change which does not affect the eligibility. A dash and number or a letter added to the hub model designation indicates a minor NOFt 2. phdicates that the propeller dianeter is reduced A dash and a number (specifying inches) added to the blade model designation from the desiyn basic diameter specified by the number of inches indicated. This number suffixed with "p" indicates a reduction by Telescoping. Telescoped blades are eligible at the same rating and diameter limitations as cut-off blades. NOTE 3. Pitch Control. Eligible with hamilton Standard manual control or constant speed governor only. NOTE 4. Feathering. Not applicable. NOTES. Mater Mitations as Ine lert hand version or an approved model propeller is eligibie at une same lating an lidted for the right model propeller NOrs 6. Interchange le Biar aerodynamically Only blades listed in the same group of the following listed groups are and vibrationwise permit interchangeability in the same diameter without a flight test. Blades with different model numbers, however, should not be incorporated in the Group see propeller let and reference should always be made to the ratings of the blades. Group (b) 6105A and 6249A NOTE A seeing Eligible with the followiny accessory equipment: Deicing slinger riny assemblies: Air Associates models HC-299 (weight 1-3/4 1b. and fits HC-180-B brake). ЧC-275 (weight 1-1/2 1b. and fits HC-200 brake). Siebenthaler (19 1b. includes spinner). (b) Air Associates Models HC-190-B (14 1b.); HC-200-B (15-1/2 1b.).