STC SP00582NY

Number SP00582NY This certificate issued to

Part 35 of the Federal Aviation Regulations.

Installation of Prop-Guard Polyurethane Protective Tape on the leading edge of metal propellers in accordance with the instructions contained in Prop-Guard Installation Instructions, Document No. FP1001-CS1002, Rev. B, dated June 3, 1999.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

McFarlane Aviation, Inc.

696 E. 1700 Road Baldwin City, KS 66006 See Attached Approved Model List (AML) Make : See Attached Approved Model List (AML)

Model : See Attached Approved Model List (AML)

Date of application : April 05, 1996

Date of issuance : March 10, 1997

Date reissued : May 23, 2013

Date amended : August 13, 1999; May 01, 2001

(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office

(Title)

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SP00582NY Date of Reissuance: May 23, 2013

3. The FAA has determined that the installation of Prop-Guard laminate in accordance with this STC is a minor alteration because it does not appreciably affect the weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other qualities of the propeller that affect airworthiness, and it may be done according to accepted practices that involve only elementary operations. Accordingly, the installation of Prop- Guard laminate may be performed by a certificated mechanic under sections 65.81 and 65.87 of the Federal Aviation Regulations (14 CFR 65.81 and 65.87), and does not require the completion of a Form 337 under section

43.9 of the Federal Aviation Regulations (14 CFR 43.9).

------ END ------