- Holder
- Hamilton Standard Division
- Revision
- 0
- Status
- Current
- Product
- Propeller
- Models
- 1
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| 2E | TCDS also shows 8310, 8484, 50057, 50063, 50253 and 50327 hubs eligible. |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
STCs approved under this data sheet · 1
What the data sheet saysOCR
This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers.
HAMILTON STANDARD 2E PROPELLER T.C. 377
Type Hydraulically controllable - not feathering (see NOTES 3 and 4)
Blade shank
Engine shaft SAE No. 40 or X (X indicates special shaft sizes for foreign engines are eligible)
Hub material Steel
Blade material Aluminum alloy
Number of blades 2
Hubs eligible 2E50, 2E40, 2EX, 8310, 8484, 50057, 50063, 50253, and 50327 (see NOTE 1)
Maximum Propeller Weight Complete
Blades Eligible Continuous Takeoff (Max.
(See NOTE 2) HP RPM Limits NOTES
6091-0
775 2100 850 2310 10'6-1/4" - 8'6-1/4" 225
6091-24
6092 is the left hand version of 6091
6103-0
to 730 1700 804 1870 11'6-1/4 - 10'1/4i 227
6103-19
6104 is the left hand version of 6103
to 730 1700 804 1870 11'6-1/4 1O"1/4" 243
6111-18
6112 is the left hand version of 6111
6157-0
775 2100 850 2310 10'6-1/4 8'6-1/4" 225
6157-24
6158 is the left hand version of 6157 5
6227-0
775 2100 850 2310 106-0 to - 2816-1/4" 225
7-24
6228 is the left hand version of 6227
(Expired 1/1/49 No propellers of this model manufactured after that
ate eligible for use on certificated aircraft.
NOTE 1. Hub Model Designation. a dash and a number o a letter added to the hub model designation indicates a
inor change which does not affect the eligibility
Blade Model Designation. A dash and a number (specifying inches) added to the blade model designation
treet pitie de in pane rainy and dater intation de cucoff i de la coping. from the design basic diameter specified by the number of
inches indicated. This number suffixed with
Pitch. Eligible with Hamilton Standard manual control or constant speed governor only.
NOTE 4. Feathering. Not applicable.
NOTE 5. Left Herd Moications as The left hand version of an approved model propeller is eligible at the same rating and
isted for the right hand model propeller
NOTE 6. ufficiently similar aerodynamically and vibrationwise to permit interchangeability in the same diamene changeable Blades Only blades listed in the same group of the following listed groups are
Group a 6157 and 62o once should alveye to made to the racinge of the blades. should not be incorporated in the