Engine model · Reciprocating · 45 hp · registry code 01002

Manufacturer (registry)
AERONCA
Model
E113 SERIES
Registry code
01002
Type
Reciprocating
Power
45 hp

The registry names only the engine series, so ADs for every model in the series are matched.

On this page

Airworthiness directives that may apply · 0

ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.

No ADs matched this model

Registered aircraft · 56

See all 56 registered aircraft
Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
  FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
  WHERE engine_model_code IN ('01002')
  ORDER BY n_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

NTSB investigations · 6

Aircraft matched to this engine model through the registry, by N-number and event date, checked against the reported serial number, make and model.

NTSB ATL05CA122Accident · Serious injuriesData collectionFinal reportAeronca C3 · Summerville, SCThe maintenance personnel failure to secure the intake valve adjustment jam nut which resulted in excessive valve clearance, and the subsequent loss of engine power.Jul 4, 2005 · N14532 · Substantial damageNTSB IAD05LA076Accident · Serious injuriesLimited investigationFinal reportAeronca C-3 · Toughkenamon, PAThe failure of the crankshaft, which resulted in a forced landing and subsequent collision with wires. A factor was the wires.Jun 12, 2005 · N13002 · Substantial damageNTSB ATL83LA203Accident · Serious injuriesLimited investigationFinal reportAeronca C3 · Ocean City, MDAt about 150 ft AGL after takeoff the acft stalled. The plt previously had an accident with the acft on 6/13/82. Since that date he had recorded 17 hrs of flt time with less than 1 hr in a J-3 cub. The J-3 is similar to the Aeronca C3 in size but with twice…May 28, 1983 · N16270 · Substantial damageNTSB ATL82FIG08Accident · Serious injuriesFinal reportAeronca C-3 · Ocean City, MDThe aircraft was observed taking off on runway 14 under a 700 ft ceiling. It climbed to about 100 ft AGL, and while still over the runway, it began a left turn and started losing altitude. The pilot reported that during the takeoff, he had throttled back and…Jun 13, 1982 · N16270 · Substantial damageNTSB CHI80DA061Accident · 1 fatalClosedAeronca C-3 · Luray, INAug 1, 1980 · N16291 · Substantial damageNTSB MIA77FA055Accident · 1 fatalClosedAeronca C3 · Immokalee, FLApr 17, 1977 · N15733 · Destroyed
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
  FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
  WHERE a.engine_model_code IN ('01002')
  ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

FAA incident reports · 6

Matched to this engine model through the registry, by N-number and event date, checked against the reported make and model.

Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
  FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
  WHERE engine_model_code IN ('01002')
  ORDER BY event_date DESC, report_number DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Service difficulty reports

No reports name this modelGeneral aviation reporting is voluntary.

STCs that may be installed · 2

Approved for this engine model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.

Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
  FROM (
    SELECT stc_number, min(matched_model) AS matched_model
    FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
    WHERE engine_model_code IN ('01002')
    GROUP BY stc_number
  ) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
  ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.