- Manufacturer (registry)
- LYCOMING
- Model
- TI0-540 SER
- Registry code
- 41533
- Installed in
- 4,886 registered aircraft
- Type
- Turbo-prop
- Power
- 310 hp
- Data sheet
- TCDSE14EA
- Holder
- Lycoming Engines
The registry names only the engine series, so ADs for every model in the series are matched.
On this page
Airworthiness directives that may apply · 47
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1969 | 1 |
|---|---|
| 1971 | 1 |
| 1973 | 1 |
| 1975 | 1 |
| 1977 | 1 |
| 1978 | 1 |
| 1979 | 2 |
| 1980 | 1 |
| 1981 | 1 |
| 1983 | 1 |
| 1984 | 1 |
| 1989 | 2 |
| 1991 | 2 |
| 1992 | 2 |
| 1993 | 1 |
| 1995 | 1 |
| 1996 | 2 |
| 1997 | 2 |
| 1998 | 2 |
| 2002 | 3 |
| 2003 | 2 |
| 2004 | 2 |
| 2005 | 2 |
| 2006 | 4 |
| 2008 | 4 |
| 2009 | 1 |
| 2010 | 2 |
| 2011 | 2 |
| 2012 | 5 |
| 2013 | 1 |
| 2015 | 2 |
| 2017 | 2 |
| 2022 | 1 |
| 2023 | 1 |
| 2024 | 1 |
| 2026 | 1 |
Engine · Lycoming TI0-540 series
AD 2026-04-11Engine (Reciprocating)AD 2023-09-09Exhaust Turbine System (Recip)AD 2022-16-03Engine (RECIPROCATING)Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('41533'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('41533'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Information bulletins that may apply · 9
Engine · Lycoming TI0-540 series
SAIB NE-19-08Reciprocating Engine Cylinder Section - Lycoming Engines Parallel Valve CylindersSAIB NE-08-32R1Propeller Governor Idler Gear Shaft Set ScrewSAIB NE-14-13Reciprocating Engine - Cylinder Mounting StudsSAIB NE-08-26R3Magneto/DistributorSAIB NE-09-04Fuel Control/Reciprocating EnginesSAIB NE-06-32R1Reciprocating Engine - CrankshaftSAIB NE-03-18SAIB NE-03-12SAIB NE-01-37Historical bulletins · 2
Query with SQL
duckdb -csv -c "SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('41533'))
GROUP BY s.saib_number ORDER BY issue_date DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('41533'))
GROUP BY s.saib_number ORDER BY issue_date DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 4,886
Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE engine_model_code IN ('41533')
ORDER BY n_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE engine_model_code IN ('41533')
ORDER BY n_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB investigations · 2,259
Aircraft matched to this engine model through the registry, by N-number and event date, checked against the reported serial number, make and model.
Of 470 cases NTSB coded with a defining event. All defining events
Findings NTSB made part of the probable cause. A case can have several. All findings
Of 869 cases with NTSB’s older coding, defined in its coding manual.
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
WHERE a.engine_model_code IN ('41533')
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c."mKey" = a.case_mkey
WHERE a.engine_model_code IN ('41533')
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FAA incident reports · 4,343
Matched to this engine model through the registry, by N-number and event date, checked against the reported make and model.
Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('41533')
ORDER BY event_date DESC, report_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('41533')
ORDER BY event_date DESC, report_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Service difficulty reports · 340
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'TIO540' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'TIO540' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STCs that may be installed · 39
Approved for this engine model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('41533')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('41533')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
PMA parts · 1,000+
Current parts manufacturer approvals (PMA): parts the FAA has approved companies to make as replacements or modifications. Each record lists its models as free text; OpenAirDocs matched them to this engine model on its data sheet, so check the FAA record before relying on it. Newest first.
Query with SQL
duckdb -csv -c "SELECT drs_guid, part_number, part_name, holder, pma_number, replaces_part, supplement_date, tcds_models
FROM 'https://openairdocs.org/data/latest/faa_type_certificate_pma.parquet'
WHERE tcds_number IN ('E14EA')
AND len(list_intersect(tcds_models, ['TIO-540-G1A', 'TIO-540-A1A', 'TIO-540-AF1B', 'TIO-540-T2AD', 'TIO-540-A2A', 'TIO-540-C1A', 'TIO-540-V2AD', 'TIO-540-AB1AD', 'TIO-540-J2BD', 'TIO-540-J2B', 'TIO-540-A2C', 'TIO-540-F2BD', 'TIO-540-AH1A', 'TIO-540-A1B', 'TIO-540-AB1BD', 'TIO-540-S1AD', 'TIO-540-AF1A', 'TIO-540-AG1A', 'TIO-540-H1A', 'TIO-540-N2BD', 'TIO-540-AK1A', 'TIO-540-U2A', 'TIO-540-W2A', 'TIO-540-AA1AD', 'TIO-540-R2AD', 'TIO-540-A2B', 'TIO-540-A1C', 'TIO-540-K1AD', 'TIO-540-AJ1A', 'TIO-540-E1A', 'TIO-540-AE2A'])) > 0
ORDER BY supplement_date DESC, drs_guid DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT drs_guid, part_number, part_name, holder, pma_number, replaces_part, supplement_date, tcds_models
FROM 'https://openairdocs.org/data/latest/faa_type_certificate_pma.parquet'
WHERE tcds_number IN ('E14EA')
AND len(list_intersect(tcds_models, ['TIO-540-G1A', 'TIO-540-A1A', 'TIO-540-AF1B', 'TIO-540-T2AD', 'TIO-540-A2A', 'TIO-540-C1A', 'TIO-540-V2AD', 'TIO-540-AB1AD', 'TIO-540-J2BD', 'TIO-540-J2B', 'TIO-540-A2C', 'TIO-540-F2BD', 'TIO-540-AH1A', 'TIO-540-A1B', 'TIO-540-AB1BD', 'TIO-540-S1AD', 'TIO-540-AF1A', 'TIO-540-AG1A', 'TIO-540-H1A', 'TIO-540-N2BD', 'TIO-540-AK1A', 'TIO-540-U2A', 'TIO-540-W2A', 'TIO-540-AA1AD', 'TIO-540-R2AD', 'TIO-540-A2B', 'TIO-540-A1C', 'TIO-540-K1AD', 'TIO-540-AJ1A', 'TIO-540-E1A', 'TIO-540-AE2A'])) > 0
ORDER BY supplement_date DESC, drs_guid DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.