Enstrom F-28A

Aircraft model · Rotorcraft · Rotorcraft · registry code 3300406

Manufacturer (registry)
ENSTROM
Model
F-28A
Registry code
3300406
Registered
38 aircraft
Type
Rotorcraft
Engines
1 · Reciprocating
Seats
3
Weight class
Up to 12,499 lb
Cruise speed
75 mph
Certification
Type certificated
Data sheet
TCDSH1CE
Holder
The Enstrom Helicopter Corporation

Model codes come from the FAA registry’s reference file. ADs are matched to them by model name and maker.

On this page

Aircraft by year built · 137

1966Registered nowDeregistered2026
Aircraft by the year they were built: 137 aircraft
19662
19672
19687
196915
19719
197220
197314
197431
197533
19763
19961

Airworthiness directives that may apply · 27

ADs whose products match this airframe model. Each AD’s applicability may narrow it by serial number, part number or configuration.

1972In forceSuperseded2026
ADs by the year they took effect: 32 ADs
19721
19742
19751
19762
19773
19791
19811
19822
19831
19881
19903
19942
19962
19971
20011
20021
20072
20151
20182
20211
20231
See all 33 ADs
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
  FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
  WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_directive.parquet' WHERE aircraft_model_code IN ('3300406'))
  ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Information bulletins that may apply · 1

Query with SQL
duckdb -csv -c "SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
  FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
  WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_saib.parquet' WHERE aircraft_model_code IN ('3300406'))
  GROUP BY s.saib_number ORDER BY issue_date DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Registered aircraft · 38

See all 38 registered aircraft
Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
  FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
  WHERE aircraft_model_code IN ('3300406')
  ORDER BY n_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

NTSB investigations · 161

Aircraft matched to this model through the registry, by N-number and event date, checked against the reported serial number, make and model.

See all 161 investigations
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
  FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
  WHERE a.aircraft_model_code IN ('3300406')
  ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

FAA incident reports · 190

Matched to this model through the registry, by N-number and event date, checked against the reported make and model.

See all 190 incident reports
Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
  FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
  WHERE aircraft_model_code IN ('3300406')
  ORDER BY event_date DESC, report_number DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Service difficulty reports · 6

SDR 2017FA0000655Intake Rocker · wornWHILE CONDUCTION FLIGHT OPERATIONS AND PERFORMING A RIGHT MANEUVER, ENGINE STARTED RUNNING ROUGH. UPON REACHING PATTERN ALTITUDE THE ENGINE COULD NOT MAINTAIN RPM AND HELICOPTER STARTED LOSING ALTITUDE AND AN EMERGENCY LANDING WITH AUTO ROTATION HAD TO BE PERFDec 20, 2017 · N90775 · Enstrm F28A · Reciprocating Engine Cylinder SectionSDR CA141218005Engine · power loss(CAN) AFTER NORMAL APPROACH TO LAND, THE TORQUE DROPPED UN-COMMANDED FROM 3400LBS TO 2600LBS, THEN BACK UP AGAIN UN-COMMANDED. OTHER ENGINE PARAMETERS FOLLOWED.Dec 5, 2014 · Enstrm F28A · Engine (Turbine/Turboprop)SDR GWH2011F00000Drive Belt · frayedBELT WAS FOUND TO BE FRAYED ABOUT .5" IN FROM THE AFT SIDE, THE ENTIRE LENGTH OF BELT. PILOT STATED BELT WAS IN GOOD CONDITION WHEN ACFT WAS PREFLIGHTED ABOUT AN HOUR PRIOR TO THE FAILURE. HE HEARD A "POP" AND RETURNED TO THE HANGAR TO FIND RUBBER CHIPS AND Nov 11, 2011 · N287Q · Enstrm F28A · Engine (Reciprocating)SDR AU980809Cylinder · cracked(AUS) CYLINDER HEAD SEPARATED FROM BARREL AT THE SECOND THREAD FROM THE TOP.Jul 17, 1998 · Enstrm F28A · Reciprocating Engine Cylinder SectionSDR 98ZZZX1739Coil · failedCOMPLAINT WAS 'MISFIRE' AT CRUISE POWER. SYMPTOM WAS NOSE YAW AT ERRATIC INTERVALS. NORMAL PREFLIGHT RUN-UP CHECK SHOWED NO PROBLEM. MAGNETO CHECK AT HOVER POWER CAUSED ENGINE FAILURE WHEN 'LEFT' MAGNETO POSITION WAS SELECTED. RECORDS INDICATE THIS COIL HAApr 18, 1998 · N57SJ · Enstrm F28A · Magneto/DistributorSDR 95ZZZX1314Distributor Gear · teeth failedTEN MINUTES INTO A TOUR FLIGHT, ENGINE BECAME MOMENTARILY ROUGH. UPON RETURNING TO THE HELIPAD, A MAG CHECK REVEALED THE RIGHT MAG WAS DEAD. UPON REMOVAL AND INSPECTION, FOUND MORE THAN HALF OF THE PLASTIC TEETH WERE MISSING (BROKEN OFF) OF THE LARGE DISTRIBJan 30, 1995 · N9087 · Enstrm F28A · Magneto/Distributor
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy
  FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet'
  WHERE aircraft_model_key = 'F28A'
  ORDER BY difficulty_date DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

STCs that may be installed · 40

Approved for this model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.

See all 40 STCs
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
  FROM (
    SELECT stc_number, min(matched_model) AS matched_model
    FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_stc.parquet'
    WHERE aircraft_model_code IN ('3300406')
    GROUP BY stc_number
  ) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
  ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

The same model under other registry codes

Amateur-built copies and renamed makers get their own codes.

Query with SQL
duckdb -csv -c "SELECT m.code, m.manufacturer, m.model, count(g.n_number) AS aircraft
  FROM 'https://openairdocs.org/data/latest/faa_aircraft_model.parquet' m LEFT JOIN 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet' g ON g.aircraft_model_code = m.code
  WHERE m.match_key = 'F28A' AND m.code NOT IN ('3300406')
  GROUP BY ALL
  ORDER BY aircraft DESC
  LIMIT 12"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.