- Manufacturer (registry)
- HOWARD AIRCRAFT
- Model
- DGA-18
- Registry code
- 4690602
- Registered
- 0 aircraft
- Type
- Fixed wing single engine
- Engines
- 1 · Reciprocating
- Seats
- 2
- Weight class
- Up to 12,499 lb
- Cruise speed
- 79 mph
- Certification
- Type certificated
- Data sheet
- TCDSTC 739
- Holder
- Howard Aircraft Foundation
Model codes come from the FAA registry’s reference file. ADs are matched to them by model name and maker.
On this page
Airworthiness directives that may apply · 0
ADs whose products match this airframe model. Each AD’s applicability may narrow it by serial number, part number or configuration.
No ADs matched this model
Registered aircraft · 0
No aircraft currently registered with this model
NTSB investigations
No NTSB investigations matched to aircraft with this modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft of this modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports
No reports name this modelGeneral aviation reporting is voluntary.
STCs that may be installed · 8
Approved for this model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.
STC SA04652CHTo allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specificationSTC SA02594SESkyView HDX Instrumentation and Autopilot System manufacturedSTC SA01406NYInstallation of Airwolf remote mounted engine oil filter kit AFC-K017 on single and multi-engine fixed light aircraft and
rotary wingSTC SA02283SE PAGE 1Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) CGR-30PSTC SA02402SE PAGE 1Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) CGR-30CSTC SA00068SEInstallation of fuel flow/pressure instruments. (W/TSIO-360-MB1)STC SA2693NMInstallation of Electronics International digital volt/amp gauges and accessories.STC SA02033ATModification to install an air-oil separator to prevent oil from being aspirated from the engine breather line.
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_stc.parquet'
WHERE aircraft_model_code IN ('4690602')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_stc.parquet'
WHERE aircraft_model_code IN ('4690602')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.