- Manufacturer (registry)
- LOCKHEED
- Model
- C-130H
- Registry code
- 5262507
- Registered
- 9 aircraft
- Type
- Fixed wing multi engine
- Engines
- 4 · Turbo-prop
- Seats
- 9
- Weight class
- 20,000 lb and over
- Certification
- Type certificated
- Data sheet
- TCDST00019LA
- Holder
- Coulson Aviation (USA) Inc.
Model codes come from the FAA registry’s reference file. ADs are matched to them by model name and maker.
On this page
Aircraft by year built · 3
| 1968 | 1 |
|---|---|
| 1969 | 2 |
Airworthiness directives that may apply · 4
ADs whose products match this airframe model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 2023 | 3 |
|---|---|
| 2024 | 1 |
Airframe · Lockheed C-130H
AD 2024-01-02FuselageAD 2023-22-06PowerplantAD 2023-11-10FuselageAD 2023-09-13WingsQuery with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_directive.parquet' WHERE aircraft_model_code IN ('5262507'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_directive.parquet' WHERE aircraft_model_code IN ('5262507'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 9
N130CGCoulson Aviation USA Inc · Portland, ORN132CGCsc Delaware Trust Co Trustee · Wilmington, DEN140CGCsc Delaware Trust Co Trustee · Wilmington, DEN460DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CAN462DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CAN464DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CAN465DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CAN468DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CAN567DFCalifornia Dept Of Forestry And Fire Protection · Mcclellan, CA
Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE aircraft_model_code IN ('5262507')
ORDER BY n_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE aircraft_model_code IN ('5262507')
ORDER BY n_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STCs approved for this model · 2
STC ST02537LAInstallation of below the floor retardant tankSTC ST02584LAInstallation of Retardant Aerial Delivery System (RADS) XXL
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' s WHERE s.stc_number IN (SELECT stc_number FROM 'https://openairdocs.org/data/latest/faa_stc_model.parquet' WHERE model_key = 'C130H') ORDER BY s.status = 'Current' DESC, s.stc_number"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' s WHERE s.stc_number IN (SELECT stc_number FROM 'https://openairdocs.org/data/latest/faa_stc_model.parquet' WHERE model_key = 'C130H') ORDER BY s.status = 'Current' DESC, s.stc_number
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB investigations
No NTSB investigations matched to aircraft with this modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft of this modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 8
SDR 7CUR202603110001Blade · crackedPROPELLER S/N N225434A WAS SENT TO C&S PROPELLER FOR REPAIR FOLLOWING REPORTS THAT #1 BLADE TIP MOVEMENT EXCEEDED ALLOWABLE LIMITS. DURING DISASSEMBLY OF THE PROPELLER ASSEMBLY, THE #2 BLADE WAS NOTED TO BE DIFFICULT TO REMOVE. DURING VISUAL INSPECTION OF THESDR 7CUR20260126001Blade · leakingDURING MAINTENANCE, A LEAKING PROPELLER BLADE WAS FOUND. PROPELLER ASSEMBLY REMOVED AND REPLACED. DISASSEMBLY REVEALED OVERHEATING OF THRUST BEARINGS AND WASHERS, AND VISIBLE CRACKS ON THE HUB STUB ARM.SDR 2025FA0000289Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, MSDR 2025FA0000293Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, MSDR 2025FA0000292Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, MSDR 2025FA0000291Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, MSDR 2025FA0000290Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, MSDR 2025FA0000287Fuel Nozzle · out of limitsPILOT OBSERVED THE ENGINE TAKING LONGER THAN NORMAL TO START WITH START TEMPERATURES LOWER THAN USUAL, THOUGH STILL WITHIN ACCEPTABLE LIMITS. THE FLIGHT WAS COMPLETED WITH ALL PARAMETERS REMAINING IN LIMITS, BUT AT THE LOWER END OF NORMAL RANGE. UPON RETURN, M
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE aircraft_model_key = 'C130H' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE aircraft_model_key = 'C130H' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
The same model under other registry codes
Amateur-built copies and renamed makers get their own codes.
Query with SQL
duckdb -csv -c "SELECT m.code, m.manufacturer, m.model, count(g.n_number) AS aircraft
FROM 'https://openairdocs.org/data/latest/faa_aircraft_model.parquet' m LEFT JOIN 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet' g ON g.aircraft_model_code = m.code
WHERE m.match_key = 'C130H' AND m.code NOT IN ('5262507')
GROUP BY ALL
ORDER BY aircraft DESC
LIMIT 12"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT m.code, m.manufacturer, m.model, count(g.n_number) AS aircraft
FROM 'https://openairdocs.org/data/latest/faa_aircraft_model.parquet' m LEFT JOIN 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet' g ON g.aircraft_model_code = m.code
WHERE m.match_key = 'C130H' AND m.code NOT IN ('5262507')
GROUP BY ALL
ORDER BY aircraft DESC
LIMIT 12Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.