NTSB investigations, LA
12 cases where the sequence of events included Flight control sys malf/fail.
Cases per year
| 2009 | 2 |
|---|---|
| 2010 | 1 |
| 2011 | 2 |
| 2013 | 2 |
| 2014 | 1 |
| 2015 | 1 |
| 2019 | 1 |
| 2022 | 2 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'LA' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s.\"tier2Number\" = '333' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE \"isDefiningEvent\"))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'LA' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s."tier2Number" = '333' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE "isDefiningEvent")) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN22LA430Accident · No injuriesClass 3 · LimitedFinal reportAgusta AW139 · Houma, LAThe inflight loss of collective control of the helicopter due to thermal damage of a collective control torque tube that abraded with misrouted electrical wiring, which resulted in an electrical short and inflight fire. Contributing to the accident were the…NTSB CEN22LA202Accident · No injuriesClass 3 · LimitedFinal reportCessna 421C · Monroe, LAThe failure of the maintenance personnel to properly reinstall the elevator trim tab hardware, which resulted in an in-flight separation of the elevator.NTSB WPR19LA112Accident · Serious injuriesClass 3 · LimitedFinal reportAir Tractor AT502 · Morganza, LAA loss of aircraft control due to the separation of the elevator pushrod attachment bolt.NTSB CEN15LA265Accident · No injuriesLimited investigationFinal reportBell 407 · Pecan Island, LAThe fatigue fracture of the tail rotor gearbox attachment studs, which resulted in a loss of tail rotor control and a subsequent hard landing.NTSB CEN15IA085Incident · No injuriesIncident investigationFinal reportDassault/Sud FAN JET Falcon · Shreveport, LAA short in the trim system’s wires and connector, which resulted in the elevator trim being in a full nose-down position.NTSB CEN13LA225Accident · Minor injuriesLimited investigationFinal reportAtkins ACRO-SPORT I · Midland, LAThe failure of the left elevator torque tube due to poor quality welds by the manufacturer, which resulted in the loss of pitch control.NTSB CEN13FA192Accident · 3 fatalField investigationFinal reportSikorsky S-76A++ · Grand Lake, LAFracture of the red tail rotor blade spar, which resulted in the separation and departure of the red tail rotor blade from the helicopter and subsequent compromised tail gearbox. The red tail rotor blade was not recovered, thus the cause of the initial…NTSB CEN11IA286Incident · No injuriesIncident investigationFinal reportCessna 560XL · Abbeville, LAThe pitch trim control cable failed due to fatigue, rendering the elevator trim inoperative.NTSB CEN11IA156Incident · No injuriesIncident investigationFinal reportSikorsky 92 · Galliano, LAThe misalignment of the retaining washer during routine maintenance, resulting in the subsequent separation of the washer and nut.NTSB ENG10IA045Incident · No injuriesIncident investigationFinal reportBell 430 · Venice, LAThe fracture of the collective servo actuator piston rod resulting from stress corrosion cracking.NTSB CEN09LA571Accident · Minor injuriesLimited investigationFinal reportMesserschmitt-Boelkow-Blohm BO-105S · Thibodaux, LAThe pilot's inability to maintain control due to the mechanic's inadvertent switching of two cyclic control tubes of different lengths during maintenance.NTSB CEN09LA198Accident · No injuriesLimited investigationFinal reportBell 206 · Galliano, LAThe failure of the tail rotor driveshaft and coupling during engine start due to the mechanic's failure to properly reattach the tail rotor driveshaft and coupling during maintenance.