NTSB investigations: Cessna 182Q, UT
10 cases on aircraft the registry lists as Cessna 182Q. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1978 | 1 |
|---|---|
| 1980 | 2 |
| 1982 | 1 |
| 1983 | 1 |
| 1984 | 1 |
| 2004 | 1 |
| 2011 | 1 |
| 2015 | 1 |
| 2018 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'UT' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('2072732'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'UT' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('2072732'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB GAA18CA202Accident · No injuriesData collectionFinal reportCessna 182 · Nephi, UTThe pilot’s failure to maintain a proper landing flare, which resulted in a hard landing.NTSB GAA15CA189Accident · No injuriesData collectionFinal reportCessna 182Q · Hanksville, UTThe pilot's failure to maintain directional control during the takeoff roll, which resulted in a runway excursion and a collision with terrain.NTSB WPR11LA400Accident · No injuriesLimited investigationFinal reportCessna 182Q · Alton, UTThe pilot’s failure to abort the takeoff in a timely manner, which resulted in insufficient altitude to clear obstructions.NTSB DEN04LA039Accident · No injuriesLimited investigationFinal reportCessna 182Q · St. George, UTthe pilot's improper flare which resulted in a hard landing.NTSB DEN84LA306Accident · No injuriesLimited investigationFinal reportCessna 182 · Salt Lake City, UTAccording to the plt the southerly wind was gusting to an unknown intensity and wind shear was encountered during landing. Ground contact occurred in a nose down attitude on the nose landing gear.NTSB DEN83LA126Accident · Minor injuriesLimited investigationFinal reportCessna 182Q · New Harmony, UTThe acft ran off the departure end of the rwy during landing after going through a fence/bushes and the acft nosed over. The pilot had made one go-around because of excessive airspeed. He said the windsock was limp as he obseved it. However,winds at cedar…NTSB DEN82DA084Accident · No injuriesFinal reportCessna 182Q · Provo, UTThe aircraft drifted off the side of the runway during landing. Power was applied for a go-around, however, the pilot stated the application of full flaps (40 degrees) prevented lift off and the aircraft nosed over.NTSB DEN80DTM18Accident · Minor injuriesClosedCessna 182Q · Richfield, UTNTSB DEN80DTM14Accident · No injuriesClosedCessna 182 · Provo, UTNTSB DEN79FTM05Accident · No injuriesClosedCessna 182 · Duchesne, UT