Service difficulty report · Support Beam · Cndair CL6002B19

Difficulty date
April 16, 2025
Submitted
May 27, 2025
Operation
Air carrier
Aircraft
N930SW
Make and model
Cndair CL6002B19
Aircraft serial
7713
Aircraft time
50,575 hours, 43,912 cycles
Part
Support Beam
Condition
Failed Insp
Location
Zone 400
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

ENGINE SUPPORT BEAM RBL27.50 CLOSE OUT ANGLE AT FS625.30 & WL111.09 HAS AN INDICATION .75" LONG BY 100% FSH PROPERGATING FROM THE LOWER FASTENER HOLE. FAILED NDT INSPECTION. (C-CHECK RO 05/27/2025)REMOVED UNSERVICEABLE RH ENG SUPPORT BEAM CLOSE OUT ANGLE (P/N: 601-35006-157SB) AT RBL27.50, FS625.30 AND LOCATED, DRILLED, AND INSTALLED NEW SERVICEABLE RH ENG SUPPORT BEAM CLOSE OUT ANGLE (P/N: 601-35006-157SB) AT RBL27.50, FS625.30 IAW CRJ200 SRM 51-40-11 & 51-42-21. COMPLETED TASK CARD 51-900-1003-SKY AND ATACHED COMPLETED FORM 337. NO WEIGHT CHANGE.