Search results
Sort
In the text of STC certificates · 209
STC SA8125SWInstall vortex generators.…Option 1:
(a) Cessna 414A modified per STC SA4943SW (Increased Gross
Weight/Winglets).
(b) Cessna 414A modified per…STC SA1521CE-DInstallation of King KFC 250 flight control system (3 axis) using 3-inch or 4-inch indicators.…FAA Approved Flight Manual Supplement
006-0381-00, dated 11-14-79, Cessna 414A with 4" indicators.
006…STC SA09105SC-DModification IAW RAM Drawing No. 1765, Rev B; and the installation of a Teledyne Continental engine TCM TSIO-520-NB modified IAW RAM STC SE09104SC.…Cessna Model 414A modified by STC SA8125SW-D (Vortex Generators), SA4943SW-D (Winglets) and
SA4546SW-D (RAM Series…STC SA4546SW-DInstallation of Teledyne Continental TSIO-520-NB engine modified per STC SE4327SW and Hartzell PHC-C3YF-2UF/FC7663D-2Q or PHC-C3YF-2UF/FC7663DB-2Q propellers or McCauley3AF32C93/82NC-5.5 to -7.0 or 3AP32C505/82NEA-5.5 to - 7.0 propellers and an increased Maximum Takeoff Weight to 6900 pounds.…Cessna model 414A aircraft modified per STC SA4546SW-D and STC SA4956NM
require FAA approved RAM Flight Manual…STC SA08996AC-DInstallation of S-TEC System 55/55X Two Axis automatic flight guidance system, Model ST-578…Certifcate A unter: A7CE
Mate : Cessna
Al odel: 414A and 421C
Description of Type Design Change:
Installation of…STC SA7787SW-DInstallation of S-TEC System 65 two axis automatic flight guidance system, model ST-397.…Also eligible on Model 414A When Modified Per STC SE09104SC (335 H.P. Engine Conversion and
7,105…STC SA5131NMInstall vortex genertors on the wing and vertical tail surfaces and an increase in maximum takeoff weight, maximum zero fuel weight, and maximum ramp weight.…402C and 414A*
Description of the Type Design Change: Install vortex generators on the wing and vertical tail…STC SA5167NMInstallation of vortex generators on the wings and vertical stabilizer and strakes on outboard side of engine nacelles.…DL-120, dated March 1, 1991, or later FAA Approved
revision.
* For the 414A, this installation is compatible…STC SA7790SW-DInstallation of S-TEC system 60 two axis automatic flight guidance system, model ST-398.…Cessna
414A and 421C
Description of T yo Design Change:
Installation of S-TEC System 60 Two Axis…STC SA3415SW-DInstallation of Century automatic flight system kit No. AK918/FD consisting of Century 41 autopilot/flight director.…414, 414A, 421C
Descriplion of Jype Design Change: Installation of a Century Automatic Flight System, Kit No.
AK918…STC SA5427SWInstallation of Texas Instruments Mode TI 9100-C navigator and King KFC250 Flight Director System, or Cessna ARC 800B Integrated Flight Control System…4023, 4026, 414A,421C
Desoription of Type Design Ishange:
Installation of Texas Instruments Model TI 9100-C Navigator…STC SA12044IBInstallation of the MT-Propeller Entwicklung GmbH MTV-14-D-C-F/CF188-30() propeller…Inc. 414A is as follows:
a. The type certification basis for the Textron Aviation Inc. 414A as shown…STC SA00571SEReplacement of certain BF Goodrich pneumatic deicer boots.…M, dated
May 7, 2001
SMR5070-07 27S-7D5070-07 4/27/99
2 Cessna Aircraft
Company
414A…STC SA8839SW-DInstallation of McCauley model 3AF32C515/82NLA-4.0 propellers.…Limitations and Conditions
This installation is limited to Cessna Model 414A airplanes modified in accordance with STC SA4943SW…STC SA00333DEInstallation of wastegate exhaust inlet elbow.…414, 414A
Description of the Type Design Change:
Installation of Wastegate Exhaust Inlet Elbow in accordance with Heliarc…STC SA00997WI-DInstallation of Bendix/King KFC 225 Automatic Flight Control System. For Model 421C, serial numbers 421C0401 and after.…MODEL 414A
1. Master Drawing List 159-08269-0001, Revision B, Dated 10-10-2001.
2. Airplane Flight…STC SA1526CE-DInstallation of King KAS 297 Altitude Selector Option…402C, 414A, 421C
Descriplion of Type Design Change:
Installation of King Model KAS 297 Altitude Selector Option in…STC SA09355SCModifications to reduce airframe aerodynamic drag…Modifications to reduce airframe aerodynamic drag on Cessna 414A model aircraft
in accordance with RAM Aircraft Corporation Master…STC SA10801SC-DInstall wheel hub caps…Install wheel hub caps on Cessna 402C, 411A, 414A, and 421C aircraft (with
Cleveland part no. 40-135…STC SA02590LAInstallation of Gilcom HE7200 Series Aircraft Tracking System…Date
Supplement
Number/Date
Amendment
Date
1 Cessna 414A A7CE 14 CFR Part
23
HE7200A-BB2327-MDL-1…