Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB EC135-67A-032 Rev 0 · 21 pages · 2.6 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1173, the docket of AD 2021-07-12. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-1173 (document 0004) · AD 2021-07-12

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC135-67A-032

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 21Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1173, the docket of AD 2021-07-12. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '3315adee845fe929ccbc9cdc12e79bcbe83cded6eb81dd7ae842e376fe779a8e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032 Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3 635 T1, 635 12+, 635 13, 635 P2+, 635 P3

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE ROTOR FLIGHT CONTROL - Cyclic stick Retrofit of cyclic stick weight compensation For the attention of Revision No. Date of issue Revision 0 2018-02-07 Summary:

With this Alert Service Bulletin (ASB), Airbus Helicopters Deutschland (AHD) prescribes the retrofit of the weight compensation of the cyclic stick.

Compliance:

Compliance with this Alert Service Bulletin is mandatory.

Revision 0, 2018-02-07 PAGE 1 of 21 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032 1 PLANNING INFORMATION

1.A EFFECTIVITY

1.A.1 Helicopters/installed equipment and parts EC135, T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 PЗ, all S/N with installed 3-axis Auto Pilot System up to 1263 inclusive and S/N 1265.

The change will be introduced into serial production with S/N 1266.

Before accomplishment of this ASB After accomplishment of this ASB

1.A.2 Non-installed equipment and parts Not applicable.

PAGE 2 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

1.B ASSOCIATED REQUIREMENTS None.

1.C REASON As a result of reassessment of the flight control system, it has been determined that a failure that leads to an uncommanded disengagement of the main rotor trim actuators, during flight with autopilot engaged and hands-off controls, could lead to high roll and pitch rates, which would require pilot intervention within a reaction time below that required by the current airworthiness standards. With accomplishment of this ASB this issue is corrected.

1.D DESCRIPTION Open the forward access cover. Install the spring mod. on the longitudinal axis.

Install the friction brake on the lateral axis. Adjust the friction brake. Check for free movement of the cyclic control. Close the forward access cover.

1.E COMPLIANCE

1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:

Install the cyclic stick weight compensation in accordance with Section 3.B of this ASB before the helicopter is delivered at the latest.

Non-installed equipment and parts:

Not affected.

1.E.2 Compliance in service Helicopters/installed equipment and parts:

The retrofit of the cyclic stick weight compensation (see Section 3.B of this ASB) must be accomplished by 31.10.2018 at the latest.

Non-installed equipment and parts:

Not affected.

1.F APPROVAL Approval of modifications:

The information or instructions contained in this document refer to change no. 4845.

The technical content of this document is approved by EASA.

1.G MANPOWER Qualification Mechanic Electrician Pilot Others Estimated approx. 8 h Man-hours Revision 0, 2018-02-07 PAGE 3 of 21 This document is available on the internet: www.airb ushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

1.H WEIGHT AND BALANCE Weight: 0.204 kg Arm longitudinal: 2024 mm Moment longitudinal: 413 kgmm Arm lateral: 232 mm Moment lateral: 47 kgmm

POWER CONSUMPTION Not affected.

1.J SOFTWARE UPGRADES/UPDATES Not affected.

1.K REFERENCES SPM(MTC) EC135, SRM EC135, AMM EC135/635

1.L OTHER AFFECTED PUBLICATIONS Publications to be updated:

The changes to AMM EC135 and IPC EC135 which are required as a result of this ASB will be incorporated with one of the next revisions.

1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:

Not affected.

Mixability:

Not affected.

PAGE 4 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032 2 MATERIAL INFORMATION

2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT All material kits required will be provided free of cost by AHD only within the time limits that apply for the compliance (Section 1.E). Material that is ordered outside the time limits given in the ASB will be charged according to the ruling prices.

2.B LOGISTIC INFORMATION Due to the large number of impacted helicopter, availability of parts and the limited time frame it is necessary to schedule the delivery of kits for the individual helicopter.

Please fill in and send back the reply form on page 19 of this ASB. The kits will be send in accordance with this reply.

2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Material kit to be ordered for one helicopter:

Material kit SB-135-67A-032-2C i.a.w. design document L670M1004894.

No. Keyword Qty New P/N Old P/N Rem.

1 Bracket assy 1 L670M1014101 2 Spring 1 L670M1015201 117-41381-01 Eye bolt 1 or L671M1021301 4 Washer 2 EN2139-06020 1 EN2139-06010 5 Washer 1 EN2139-06010 1 MBBN3129-06D 6 Nut 1 MBBN3129-06D 1 EN2367-14018 7 Split pin 1 EN2367-14018 ISO4762-M5X14-A2- Screw 2 70 9 Washer 2 EN3822-050 10 Bolt 1 L671M1030220 11 Cap spring 32 DIN2093B20 B 12 Washer 1 LN65045-16 Revision 0, 2018-02-07 PAGE 5 of 21 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032 No. Keyword Qty New P/N Old P/N Rem.

13 Friction disc 1 L221M0012206 1 MBBN3129-08D 14 Nut 1 MBBN3129-08D 1 LN94-20025 15 Split pin 1 LN94-20025 16 Insert 2 SL10-438M5 17 Bolt 1 L635M1021201 18 Bolt 1 L671M1005256 19 Washer 1 LN29952-0815M 20 Angle 1 L221M1020206 A 21 Spring 1 RZ087DX DIN65268-05012A 22 Screw 2 or LN9038-05012 LN9025-0510L 23 Washer 2 or LN9025-0520L Remark:

A = Airbus Helicopters Deutschland does not take back parts with old part numbers.

B = The material kit contains more spring caps than the usually necessary number.

PAGE 6 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032 Consumables to be ordered separately:

Products can be ordered from KLX Aerospace Solutions. The given CM numbers are

i.a.w. the list of consumable materials of the Standard Practice Manual (MTC).

Website: https://klxaerospace.com Email: integration@klx.com

WARNING

RESPECT THE SAFETY DATA SHEET OF THE MANUFACTURER.

No. Keyword Qty. Specification ** Rem.

(approx.)

1 Aceton a.n.* 203 2 Corrosion preventive 0.5 liter 518 paste Adhesive 58 EC 1838B-A 601 4 Adhesive paste 1g 6057 *a.n. = as needed ** Specification i.a.w. MTC, 20-01-01-102.

Remark:

A = It is mandatory to use adhesive CM 601. Do not replace it by adhesive CM 671 as described in the list of consumable materials.

Special tools:

Keyword Qty. Specification Rem.

Spring balance 1 Measurement range up to 50 N Remark:

A = Commercial product.

2.D MATERIAL TO BE RETURNED None.

Revision 0, 2018-02-07 PAGE 7 of 21 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Not applicable.

З.В WORK STEPS

3.B.1 Preliminary steps

1. De-energize the electrical system of the helicopter, refer to AMM, 24-00-00, 2-1.

2. Remove the forward access cover, refer to AMM, 52-40-00, 4-3.

3.B.2 Procedure NOTE It is not necessary to remove the angle (6, Fig. 1) of the control rod assy (5).

1. Remove the spring (1, Fig. 1) from the control rod assy (5).

2. Remove the spring (1, Fig. 1) from the angle (2) and from the helicopter.

3. Remove the screws (3, Fig. 1), washers (4) and the angle (2) from the helicopter.

Detail E (see Figure 8) 5 2 1 3,4

(6) 1 Spring RZ087DX 2 Angle L221M1020206 3 Screw DIN65268-05012A or LN9038-05012 4 Washer LN9025-0510L or LN9025-0520L 5 Control rod assy L221M1021101 6 Angle Removal of angle and spring Figure 1 PAGE 8 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

4. Install the inserts (1, Fig. 2) into the cockpit floor with adhesive paste (CM 6057), refer to the measurements given in figure 2 and install in accordance with MTC 20-02-08-406 and SRM 51-20-00, 8-18.

5. Let the adhesive paste (CM 6057) cure, refer to the instructions of the manufacturer.

Detail A (see Figure 8) All dimensions in mm

• (11) Ø 17.4+0.2 × 1889 - Ø 17.4+0.2 - 1 Insert SL10-438M5 /1\ Installed with adhesive paste (CM 6057) Installation of the inserts in the cockpit floor Figure 2 NOTE When the connections of the control rods of the cyclic stick are opened, the cyclic stick can move uncontrollably.

6. Fixate the cyclic stick to prevent it from falling in logitudinal and / or lateral direction.

Revision 0, 2018-02-07 PAGE 9 of 21 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

7. Replace the bolt (4, Fig. 3) with the eye bolt as follows:

a. Remove and discard the split pin (1, Fig. 3) and the nut (2).

b. Remove the washer (3, Fig. 3) and the bolt (4).

c. Install the eye bolt (5, Fig. 3) and the washers (6, 7) wet with corrosion preventive paste (CM 518).

d. Torque the nut (8, Fig. 3) to a value between 5 Nm and 6 Nm.

e. Install the split pin (9, Fig. 3).

Detail B (see Figure 8) Removal bolt Installation eye bolt 5Nm - 6Nm 1 Split pin EN2367-14018 2 Nut MBBN3129-06D Inserted with corrosion 3 Washer EN2139-06010 preventive paste (CM 518).

4 Bolt L635M1021201 5 Eye bolt 117-41381-01 or L671M1021301 6 Washer EN2139-06020 7 Washer EN2139-06010 8 Nut MBBN3129-06D 9 Split pin EN2367-14018 Replacement of the bolt with the eye bolt Figure 3 PAGE 10 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

f. Make sure that the safety element of the control rod (1, Fig. 4) does not have the same orientation as the eye bolt (2).

g. If the safety of the control rod (1, Fig. 4) has the same orientation as the eye bolt (2), turn the safety around.

Detail F (see Figure 8) Orientation 1 Safety of control rod 2 Eye bolt 117-41381-01 or L671M1021301 Orientation of the safety of the control rod and the eye bolt Figure 4 Revision 0, 2018-02-07 PAGE 11 of 21 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB EC135-67A-032

8. Install the bracket assy (3, Fig. 5) to the cockpit floor as follows:

a. Put the bracket assy (3, Fig. 5) in its installation position on the inserts.

b. Install the bracket assy (3, Fig. 5) with the washers (2) and the screws (1) wet with corrosion preventive paste (CM 518).

c. Push the bracket assy (3, Fig. 5) as far as possible in flight direction.

d. Torque the screws (1, Fig. 5) to a value between 3 Nm and 4 Nm.

e. Make sure that the lever of the bracket assy (3, Fig. 5) can move freely.

f. If the lever of the bracket assy (3, Fig. 5) is blocked by a screw (1), loosen the screws (1) and move the bracket assy (3, Fig. 5) until the lever can move freely. Then torque the screws (1, Fig. 5) to a value between 3 Nm and 4 Nm.

View C (see Figure 8)

FLIGHT DIRECTION /2 1 /1 3Nm - 4Nm 3Nm - 4Nm 1 Screw ISO4762-M5X12-A2-70 2 Washer EN3822-050 3 Bracket assy L670M1014101 Inserted with corrosion preventive paste (CM 518) First hole on the bracket assy Installation of the bracket assy Figure 5

9. Install the spring between the first hole of the bracket assy and the eye bolt, refer to figure 8.

10. Replace the bolt (1, Fig. 6) with the bolt (7) as follows:

a. Remove and discard the split pin (6, Fig. 6) and the nut (5).

b. Remove the washer (4, Fig. 6) and the bolt (1).

PAGE 12 of 21 Revision 0, 2018-02-07 This document is available on the internet: www.airbushelicopters.com/techpub/