Service bulletin · Airbus Helicopters

On this page

Copies · 3

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 2Airbus Helicopters ASB EC225-52A017 Revision 2 · 38 pages · 2.4 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0785 (document 0002) · AD 2021-19-16

Revision 1Airbus Helicopters ASB EC225-52A017 Revision 1 · 36 pages · 4.7 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0785 (document 0002) · AD 2021-19-16

No revision namedAirbus Helicopters ASB EC225-52A017 Revision 0 · 33 pages · 3.3 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0785 (document 0002) · AD 2021-19-16

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC225-52A017
Latest revision known
EC225-52A017, Revision 1

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

Text · 38OCR

Revision 2, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '03a31cd833d8b59652a344f86881a3f8d46442be79920d364a60e18902dd91cb'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 Civil version: LP

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE DOORS - Side stairway door Improvement of the locking system Corresponds to modification 0728281 For the attention of Revision No. Date of issue Revision 0 2017-08-29 Revision 1 2019-10-15 Revision 2 2020-02-25 Summary:

The purpose of this ALERT SERVICE BULLETIN is to improve the locking system of the LH side stairway door to make sure that the door is correctly shut and locked. A direct display unit has also been added to allow the operator to visually check the locking.

Reason for last revision:

The purpose of revision 2 of this ALERT SERVICE BULLETIN is to correct the references to paragraphs indicated in paragraph 1.E.2. (Compliance in service), to update the part number of the customized door handle and to install a spring pin with a larger diameter when installing the direct display unit.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

ASB EC225 52A017 Revision 0 2017-08-29 Page 1/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017

1. PLANNING INFORMATION

• CAUTION

THIS ALERT SERVICE BULLETIN IS WRITTEN

BASED ON THE ORIGINAL HELICOPTER CONFIGURATION (AS DEFINED IN • THE INDIVIDUAL INSPECTION LOG BOOK (RIC)). IT

ALSO TAKES INTO ACCOUNT ALL AIRBUS

HELICOPTERS APPROVED CONFIGURATION

CHANGES MADE AFTER DELIVERY, IF AIRBUS HELICOPTERS WAS INFORMED OF THEM. IT IS

THE RESPONSIBILITY OF THE OPERATOR TO

CHECK THE COMPATIBILITY OF ANY

MODIFICATIONS WITH THE CURRENT HELICOPTER CONFIGURATION.

MODIFICATIONS ARE INCOMPATIBLE, IT IS THE

RESPONSIBILITY OF THE OPERATOR TO DEFINE

THE NECESSARY ADAPTATION WORK AND HAVE

THEM APPROVED BY THE AIR TRANSPORT

AUTHORITIES IN THE COUNTRY CONCERNED,

AND TO MAKE SURE THAT THEIR AIRWORTHINESS IS FOLLOWED UP.

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters equipped with the LH side stairway door assy PRE MOD 0728281(VIP door locking improvement).

NOTE 1 Refer to the Individual Inspection Record (or RIC AMS), the Equipment Log Card (FM) of the side stairway door and the Aircraft Log Book to identity the current modification status of the helicopter.

1.A.2. Non-installed equipment or parts Side stairway door assy PRE MOD 0728281.

NOTE 2 Refer to the Log Card (FM) of the side stairway door and the Aircraft Log Book to identify the current modification status of the helicopter.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2017-08-29 Page 2/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017

1.C. REASON During an AS532 flight, the amber "DOOR" indicator light came on. Shortly afterwards, the LH side stairway door opened in flight, tearing off its attachment fittings. The door remained attached to the helicopter by the load compensator system cable. The helicopter landed without further consequences.

The door handles were in the closed position but the locking of the door was not secured by the internal claw engagement system of the lock, due to the presence of paint preventing handle return. In-flight vibrations led to the opening of the LH side stairway door.

Revision 0:

The purpose of this ALERT SERVICE BULLETIN is to improve the locking system of the LH side stairway door to make sure that the door is correctly shut and locked. A direct display unit has also been added to allow the operator to visually check the locking.

The purpose of this ALERT SERVICE BULLETIN supersedes the instructions of ALERT SERVICE BULLETIN No. 52A014 (Check for correct locking of the side stairway door).

Revision 1:

The purpose of revision 1 of this ALERT SERVICE BULLETIN is to update the kits for harmonization of the stairway door lock (1), and to update the P/N of the spring pin (23) and the countersunk screw (17) and to extend the compliance in service limit from 24 to 30 months.

Revision 1 affects compliance with revision 0 of this ALERT SERVICE BULLETIN.

Revision 2:

The purpose of revision 2 of this ALERT SERVICE BULLETIN is to correct the references to paragraphs indicated in paragraph 1.E.2. (Compliance in service), to update the part number of the customized door handle and to install a spring pin with a larger diameter when installing the direct display unit.

Revision 2 affects compliance with the previous revisions of this ALERT SERVICE BULLETIN.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- Removing the LH side stairway door.

- Removing the handle assy.

- Removing the lock control lever.

- Modifying the stop support box.

- Installing a locking visualization system (Helicopters PRE MOD 0726391 only).

- Installing a new handle assy (see NOTE 4 of paragraph 2.C.).

- Installing the LH side stairway door.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Airbus Helicopters recommends compliance with instructions given in paragraph 3.B. of this ALERT SERVICE BULLETIN, as per operational operational and contractual constraints.

Revision 0 2017-08-29 Page 3/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017

1.E.2. Compliance in service The work must be performed on the helicopter and on non-installed equipment by the operator.

Helicopters/installed equipment or parts:

For helicopters PRE MOD 0726391 (VIP door closing immediate warning), comply with paragraph 3. within 30 months, following receipt of this ALERT SERVICE BULLETIN Revision 0 issued on the date mentioned in page footer.

For helicopters POST MOD 0726391 (VIP door closing immediate warning), comply with paragraph 3.

except paragraphs 3.B.2.b., 3.B.2.c. and 3.B.2.d. within 30 months, following receipt of this ALERT SERVICE BULLETIN Revision O issued on the date mentioned in page footer.

Helicopters which have complied with revision 0 or revision 1:

Comply with paragraph 3.B.2.g. of this ALERT SERVICE BULLETIN.

Helicopters which have not complied with revision 0 or revision 1:

Comply with paragraph 3.B. of this ALERT SERVICE BULLETIN except paragraph 3.B.2.g.

Non-installed equipment or parts:

Modify stock as per paragraph 3.B.5. before installation or at the latest within 30 months following receipt of this ALERT SERVICE BULLETIN revision 0 issued on the date indicated in the page footer.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0728281 which was approved on October 11, 2016 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on August 29, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on August 29, 2017 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 14, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 14, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

Revision 0 2017-08-29 Page 4/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbu elicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on February 24, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on February 24, 2020 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:

Qualifications:

- 1 Mechanical Technician.

- 1 Airframe Technician.

The Estimated Man-hours is indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours

- 6 hours for the Mechanical Technician.

- 2 hours for the Airframe Technician.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at one day.

1.H. WEIGHT AND BALANCE The changes in weight and moment are negligible.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1 K. REFERENCES The following documents are necessary for compliance with this ALERT SERVICE BULLETIN Aircraft Maintenance Manual (MMA):

MMA: 52-13-01-061: Removal-Installation - Side stairway door.

Revision 0 2017-08-29 Page 5/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 Standard Practices Manual (MTC):

MTC: 20-02-05-404: Assembly by screws and nuts - Joining MTC: 20-02-06-404: Safetying with cotter pins - Safetying and locking assemblies MTC: 20-02-06-409: Safetying with Loctite compound - Safetying and locking MTC: 20-04-01-102: Use of cleaning products on individual parts and on helicopters - Cleaning MTC: 20-04-04-403: Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment before painting MTC: 20-04-05-402: Application of Epoxy primer P05 - P20 - Paint and primer application procedure MTC: 20-04-05-422: Application of polyurethane finish paint (1500-M) - Paint and primer application MTC: 20-05-01-212: Implementation of Sealing compound CM 6232 - General sealing procedures MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-08-05-101: Drafting and updating the log card (F.M) - General rules applicable to aircraft MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF NOT, IT IS

THE OPERATOR'S RESPONSIBILITY TO OBTAIN

THE DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.

This modification will be integrated into the following manual:

Aircraft Maintenance Manual (MMA).

Revision of the documents Illustrated Parts Catalog (IPC) will be updated on the customer's order.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

PRE MOD and POST MOD side stairway doors are not interchangeable.

Mixability:

Not applicable.

Revision 0 2017-08-29 Page 6/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information on the price of modification kits and/or components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.

Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

For helicopters PRE MOD 0726391 and which have not complied with revision 0 of this ALERT SERVICE BULLETIN:

Order, as required, one kit 332A08-1666-0572 and one kit 332A08-0907-0273.

For helicopters POST MOD 0726391 and which have not complied with revision 0 of this ALERT SERVICE BULLETIN:

Order, as required, one kit 332A08-1666-0572 only.

Order the components as per NOTE 3, NOTE 4 and NOTE 5 for each helicopter which has complied with revision 0 or for each stairway door assy P/N 330A22-2400-06.

Revision 0 2017-08-29 Page 7/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 New Old Key Word Qty PIN Item P/N Instruction VIP door locking improvement kit, 332A08-1666-0572 including:

Handle, outer 330A22-2443-21 2 330A22-2443-20 Scrap Cover, upper 332A22-0332-20 3 Cover, lower 332A22-0333-20 4 Support, spring 332A22-0330-20 5 Spring 330A22-2494-20 6 Shim 1 330A22-2411-46 7 Ring, retaining 1 23201AM0160T Washer 5 23111AG050LE 9 Screw 5 22271BC050014L 10 Nut 2 ASN52320BH050N 24 Pin, spring З NSA5319-05-025 43 New Ite Old Key Word Qty P/N m P/N Instruction VIP door closing direct visualization kit, 332A08-0907-0273 including:

Plexiglass 332A22-0326-20 11 Window, visualization 332A22-0326-01 12 Blanking cap, fixed 332A22-0326-02 13 Lever, control, pennant 332A22-0326-03 14 door Shim, adjustment 332A22-0326-22 15 Flame assy 1 332A22-0326-04 16 Screw, 100Countersunk 2 22256BC040010L 17 Head Bolt, hexagonal head 2 22208BC040014L 18 Bolt, special wide head A0164TK040S010X 19 Nut, self-locking 6 ASN52320BH040N 20 Washer 23111AG040LE washer, flat 2 23112AG04OLE 22 Nut, self-locking 1 ASN52320BH050N 24 Pin, spring 2 NSA5319-05-025 43 Revision 0 2017-08-29 Page 8/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 Equipment or parts to be ordered separately:

New Old Key Word Qty P/N Item P/N Instruction including: Stairway door lock 330A22-2442-01 1 330A22-2442-00 Scrap See NOTE 3 Handle, interior ref For reference only 1a For ref. only Pins ref For reference only 1b For ref. only Cover ref For reference only 1c For ref. only Screw ref For reference only 1d For ref. only Spring ref For reference only 1e For ret. only Lever ref For reference only 1f For ref. only Axle ref For reference only 1g For ref. only Screw, pressure ref For reference only 1h For ref. only Lock, cylinder ref For reference only 1j For ref. only Box ref For reference only 1k For ref. only Countersunk screw 2 22256BC040010L 17 See NOTE 5 Pin, spring 2 NSA5319-05-025 43 See NOTE 5 Customized handle 330A22-2491-2351 45 See NOTE 3 and NOTE 4 NOTE 3 When ordering the stairway door lock (1): If the interior handle has a chrome finish, order P/N 330A22-2442-01 (1).

If the interior handle has a customized finish, order P/N 330A22-2442-01 (1) + the customized handle P/N 330A22-2491-2351 (45) and indicate the finish specified in the customer file when ordering.

NOTE 4 For the attention of customers with a customized handle (45) delivery lead times will be indicated by the Sales and Customer Relations Department on the customer's order.

NOTE 5 For helicopters which have complied with this ALERT SERVICE BULLETIN revision 0 with kits 332A08-1666-0571 and 332A08-0907-0271.

Order the screws (17) and the spring pins (43) and refer to paragraph 3.B.2.g.

Revision 0 2017-08-29 Page 9/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 Order components listed below:

New Old Key Word Qty P/N Item P/N Instruction Outer label, White (EN) 332A00-0688-AE 35 Outer label, White (FR) 332A00-0688-AF 36 Outer label, White (EN) 332A00-0649-AJ 37 Outer label, White (FR) 1 332A00-0649-AK 38 Consumables to be ordered separately:

As per Work Cards and Tasks indicated in this ALERT SERVICE BULLETIN and list below:

Key Word Qty P/N Item Red paint AR ECS2018.40-2801 CM 4185 25 Adhesive, Loctite (242) AR ASNA4018 CM 683 26 Sealant (PR1829B2) AR ECS6046-1198 CM 6232 27 Chemical transformation agent AR ECS2338.10 CM 316 28 EPOXY primer (P05) AR DHS186-111.20 CM 487 29 Grease AR DCSEA354 CM 115 30 Green paint AR ECS2018.40-2455 CM 4186 44 The consumables can be ordered separately from the following companies.

Aviatec global aviation Website: https://www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193.8803.630 Fax: +33 1.34.46.45.26 or +49 4193.8803.699 AOG: +49 4193.8803.660 AOG email: aog@aviatec.aero BDSI Gaches chimie Website: https://www.gaches.com Telephone: +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG email: marketplace@gaches.com Website: https://www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG email: AOGdesk@Boeingdistribution.com

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2017-08-29 Page 10/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- As per Work Card 20-02-06-409 (MTC), read and comply with the instructions for safetying with loctite compound.

- As per Work Card 20-04-04-403 (MTC), read and comply with the instructions for touching-up with Alodine 1200 protection (Bonderite M-Cr 1200).

- As per Work Card 20-04-05-402 (MTC), read and comply with the instructions for applying epoxy primer P05 - P20

- As per Work Card 20-05-01-212 (MTC), read and comply with the instructions for the implementation of sealing compound CM 6232.

As per Work Card 20-02-05-404 (MTC), unless specified differently, apply the standard tightening torque values.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Disconnect all electrical supply sources as per Work Card 20-07-03-406 (MTC).

- Install the appropriate access equipment.

- Remove protective carpet.

- Remove stairway door (a) (Figure 1) as per Task 52-13-01-061 (MMA).

- Remove screws (m), cups (n) and step No. 4 (o) from stairway door (a).

3.B.2. Procedure

3.B.2.a. Replacement of the handle assy (Figure 1, Figure 3 and Figure 5) As per Figure 1:

- On inside door:

• Remove screw (g), washer (h), nut i) from rod (f) (DETAIL B).

• Disconnect rod (f) from lock (e).

• Remove screw (g), washer (h), nut i) from rod (k).

• Disconnect rod (k) from lock (e).

• Scrap nuts ().

- On outside door:

• Remove and scrap retaining ring (ac) and outer handle (ab) (DETAIL C).

• Remove screws (ad), washers (ae) and lock (e).

• Remove barrel (af) from lock (e).

• Scrap lock (e).

Revision 0 2017-08-29 Page 11/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-52A017 As per Figure 3 and Figure 5:

- On lock (1) (DETAIL J Figure 5):

• Remove the two pins (1b) and handle (1a) (SECTION K-K).

• Remove screws (1d) and cover (1c).

• Remove spring (1e).

• Remove pin (1b), lever (1f) and axle (1g).

• On axle (1g), loosen screw (1h) and remove barrel (1)).

• Scrap pins (1b) and store barrel (1j).

- Install barrel (af) on axle (1g), tighten screw (1h) to standard torque.

- Put box (1k) and lower cover (4) in position on stairway door (a) by interlaying sealant (27).

- Attach box (1k) and lower cover (4) with three screws (10) and three washers (9) (DETAIL C Figure 3).

- Put support (5), shim (7) and handle (2) in position on axle (1g) (SECTION K-K Figure 5).

- Align holes (Ø 2 mm) of handle (2), support (5) and shim (7).

CAUTION SPRING (6) MUST FAVOR THE LOCKING (CLOCKWISE ROTATION) OF THE MECHANISM WHEN ACTUATING HANDLE (2).

- Install spring (6) on axle (1g).

NOTE 1 The longer end of spring (6) must be inserted in support (5), shim (7) and handle (2).

- Install axle (1g) equipped with support (5), shim (7) and spring (6) on box (1k) by inserting the shortest end of spring (6) in hole T (DETAIL J.

NOTE 2 Make sure that o-ring (1m) is correctly positioned in its housing before inserting axle (1g).

NOTE 3 Turn axle (1g) with handle (2) in the counterclockwise direction (spring tensioned) until spring (6) is aligned with hole T of box (1k).

- Install lever (1f) and a spring pin (43) on axle (1g) (SECTION K-K).

- Install spring (1e) on lever (1f).

- Install cover (1c) by inserting the end of the spring in its orifice.

- Attach cover (1c) with screws (1d) to match box (1k).

- Install handle (1a) or the customized handle (45) and two spring pins (43).

- Apply grease (30) to ball-ends of lever (1f) (DETAIL J).

- Connect rods (f) and (k) (DETAIL B Figure 3) on lever (1f) (DETAIL J Figure 5).

- Install screws (g), washers (h) and nuts (24) (DETAIL B Figure 3).

- Adjust the locking system as per paragraph 4.A.1.a.

- Install retaining ring (8) (DETAIL C Figure 3).

- Put upper cover (3) in position on stairway door (a) by interlaying sealant (27).

- Attach upper cover (3) with three screws (10) and three washers (9) (DETAIL C).

Revision 0 2017-08-29 Page 12/38 Revision 2 2020-02-25 This document is available on the Internet: www.airbushelicopters.com/techpub/