On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2021-0577; AD 2021-22-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2020-0909, the docket of AD 2021-05-15. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Pratt & Whitney
- Type
- Alert Service Bulletin
- Number
- PW4G-100-A72-262
- Latest revision known
- PW4G-100-A72-262, Revision 1, dated September 3, 2020
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 20Partly OCR
Revision 1, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2021-0577; AD 2021-22-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b5f5e226e164bcbbd4df5193821b201db479ca197b72f19fcc3441c171e4e1e2' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b5f5e226e164bcbbd4df5193821b201db479ca197b72f19fcc3441c171e4e1e2' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
██ ██ ALERT SER VICE
BULLETIN
REVISION NOTICE ENGINE — RING
SEGMENT ,
ASSEMBL Y , AIR
SEALING, LOW
PRESSURE
TURBINE (LPT), 4TH ST AGE —
REPLACE THE LPT 4TH ST AGE AIR
SEALING RING
SEGMENT
ASSEMBLIES AND
EXAMINE THE LPT CASE FOR
BULGING T urbojet Engine Service Bulletin No.
PW4G-100-A72-262 Revision No.
1 dated September 3, 2020.
Revision History Original Issue October 22, 2019 Revision 1 September 3, 2020 Reason for the Revision T o remove engines from the applicable engine serial numbers for engine models PW4164, PW4168, and PW4168A, so that this Service Bulletin only applies to serial numbers P733301 thru P733692.
T o revise the Reason Section to remove references to the T alon IIA and T alon IIB outer combustion chamber configurations.
T o add References 5 and 6 in the References Section.
T o revise the Compliance Category to include a code of 6 for engines with non-talon combustor configurations.
T o add to the Compliance Section, under category code 6, which engine models include the non-talon combustor configurations.
T o add to the Compliance Section, under category code 4, which engine models include the talon combustor configurations.
T o correct the progression chart in Figure 3 to include this Service Bulletin’ s number .
Ef fect of Revision on Prior Compliance Operators should review this revision to make sure that they are in compliance with the revised Engine Ef fectivity in the Planning Section of this Service Bulletin.
This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.
All pages have the current revision number .
T echnical changes are marked with black bars.
MODEL
APPLICA TION PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170
BULLETIN ISSUE
SEQUENCE PW4G-100 Series A72-262 Page Revision No.
Date 1 thru 18 1 September 3/20 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.
P&W Distribution Code 2639 PW4G-100-A72-262 Page 1 of 1 Published in United States of America Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
██ ██
██ ██ ALERT SER VICE
BULLETIN ENGINE — RING
SEGMENT ,
ASSEMBL Y , AIR
SEALING, LOW
PRESSURE
TURBINE (LPT), 4TH ST AGE —
REPLACE THE LPT 4TH ST AGE AIR
SEALING RING
SEGMENT
ASSEMBLIES AND
EXAMINE THE LPT CASE FOR
BULGING MODEL
APPLICA TION PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170
BULLETIN ISSUE
SEQUENCE PW4G-100 Series A72-262 A T A NUMBER 72-53-00
UTC/P&W
PROPRIET AR Y
INFORMA TION This document is the property of United T echnologies Corporation — Pratt & Whitney (UTC/P&W).
Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without UTC/P&W's express written permission.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Possession, use, copying or disclosure by anyone without UTC/P&W's express written permission is not authorized and may result in criminal and/or civil liability .
Export Classification:
Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Compliance Category 4, 6 P&W Distribution Code 2639 l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 1 of 18 Published in United States of America
Summary The function of this Alert Service Bulletin (ASB) is to replace the Low Pressure T urbine (LPT) 4th stage air sealing ring segment assemblies and examine the LPT case for bulging.
LPT 4th stage vanes leaned back which caused LPT 4th stage blade fractures, LPT 4th stage blade airfoil notching, and Unplanned Engine Removals (UERs).
Planning Information Ef fectivity Data Engine Models Applicable PW4164, PW4168, PW4168A Engine Serial Nos.
P733301 thru P733692 PW4168A-1D, PW4170 Engine Serial Nos.
P735001 thru P735190 This Alert Service Bulletin also applies to engines converted to the PW4164-1D, PW4168-1D, PW4168A-1D, PW4170 models by Reference 9, SB No.
PW4G-100-72-220 Concurrent Requirements There are no concurrent requirements.
Reason
1.
Problem:
LPT 4th stage vane lean back can occur on PW4000-100 inch engines which causes LPT 4th stage blade airfoil notching, LPT 4th stage blade fracture, and UERs.
This lean back occurred on a number of engines and caused an aborted takeof f, an air turnback, engine surge during descent, and vibration indications that were more than the maximum limits.
2.
Cause:
During service, the LPT 4th stage air sealing ring segment assemblies can suf ficiently move into the LPT 4th stage blades knife edge seals which causes damage to the ring segment assemblies and lets gaspath air impinge on the LPT case.
This can distort (local bulging) the LPT case rail, which results in LPT 4th stage vane lean back and damage to the LPT 4th stage blades.
3.
Solution:
Replace the LPT 4th stage air sealing ring segment assemblies and do a dimensional inspection of the LPT case for bulging.
Description Replace the LPT 4th stage air sealing ring segment assemblies with new LPT 4th stage air sealing ring segment assemblies and do a dimensional inspection of the LPT case for bulging.
l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 2
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Compliance For PW4164, PW4168, PW4168A engines installed with the T alon IIA Outer Combustion Chamber Assembly , PN 51J100 or PN 51J382, by Reference 8, SB No.
PW4G-100-72-179, or Reference 12, SB No.
PW4G-100-72-253 or the T alon IIB Outer Combustion Chamber Assembly , PN 51J381 or PN 51J500, by Reference 9, SB No.
PW4G-100-72-214, Reference 10, SB No.
PW4G-100-72-219, or Reference 12, SB No.
PW4G-100-72-253.
And For PW4168A-1D and PW4170 engines.
Category 4 Do when the engine or module first goes to a maintenance base which can do these procedures regardless of the scheduled maintenance action or the reason for engine removal.
Each time an LPT module is disassembled suf ficiently to get access to the LPT 4th stage air sealing ring segment assemblies, it is necessary to replace the LPT 4th stage air sealing ring segment assemblies with new and do a check of the LPT case for bulging.
NOTE :
“First visit” is classified as the next induction of an engine into the shop for maintenance involving separation of pairs of major mating engine flanges, except the separation of engine flanges solely for the purposes of transportation without subsequent engine maintenance does not constitute an engine shop visit.
A “major mating engine flange” is considered flanges H through P .
For location of flanges, refer to Reference 3, Engine Manual, Chapter/Section 72-00-00 Engine General, Description/Operation-01, Figure
6.
For PW4164, PW4168, PW4168A engines installed with the non-T alon Outer Combustion Chamber Assembly , PN 52J200, or 54J200, by Reference 5, SB No.
PW4G-100-72-13, or PN 54J300, or PN 52J200-001, by Reference 6, SB No.
PW4G-100-72-74 or PN 54J300-001, by Reference 12, SB No.
PW4G-100-72-253.
Category 6 Do when the subassembly
(e.g.
modules, accessories, components, build groups) is disassembled suf ficiently to give access to the changed part and to all changed spare parts.
Approval Data The part number changes and/or part changes specified in the Material Information section and Accomplishment Instructions of this Alert Service Bulletin agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
This Alert Service Bulletin does not contain any change information that revises the equipment definition covered by Airbus approved modifications.
Manpower The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:
1.
Necessary for Replacement .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
50.0
2.
Necessary for Inspection .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.0
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
52.0 l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 3
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
W eight Data No Change.
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References
1.
T urbojet Engine Standard Practices Manual, Part No.
585005.
2.
PW4164, PW4168, PW4168A, PW4170 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A343.
3.
PW4164, PW4164-1D, PW4164C, PW4164C-1D, PW4164C/B, PW4164C/B-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170 T urbofan Engines, Engine Manual, Part No.
51A342.
4.
PW4000 Series T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.
51A357.
5.
Service Bulletin No.
PW4G-100-72-13;
Engine — Chamber Assembly , Outer Combustion - Replace With A New Chamber That W eighs Less Than The Present One.
Issue Sequence 72-13, PW4G-100 Series.
6.
Service Bulletin No.
PW4G-100-72-74;
Engine - Chamber Assembly , Outer Combustion - Modification Of T o Incorporate A Spark Igniter Guide That Will Not Rotate.
Issue Sequence 72-74, PW4G-100 Series.
7.
Service Bulletin No.
PW4G-100-72-76;
Engine — Ring Segment Assemblies, 3rd Thru 5th Stage Low Pressure T urbine (LPT) Air Sealing — Introduction Of Ring Segments With Overhung Honeycomb Seals.
Issue Sequence 72-76, PW4G-100 Series.
8.
Service Bulletin No.
PW4G-100-72-179;
Engine — Dif fuser And Combustor — Introduction Of The T alon II Combustor System For Delivered Engines T o Reduce Engine Emissions.
Issue Sequence 72-179, PW4G-100 Series.
9.
Service Bulletin No.
PW4G-100-72-214;
Engine — Chamber Assemblies, Inner And Outer Combustion — Introduction Of The T alon IIB T o Reduce Combustor Exit T emperature At The Outer Diameter .
Issue Sequence 72-214, PW4G-100 Series.
10.
Service Bulletin No.
PW4G-100-72-219;
Engine — Modification Of, T o Incorporate The Advantage70 ™ ;
Performance And Durability Upgrade Kit T o Improve Engine Reliability And Reduce Thrust Specific Fuel Consumption.
Issue Sequence 72-219, PW4G-100 Series.
1.
Service Bulletin No.
PW4G-100-72-220;
Engine — Conversion Of A PW4164, PW4168, Or PW4168A Engine T o A PW4164-1D, PW4168-1D, PW4168A-1D, Or PW4170 Engine.
Issue Sequence 72-220, PW4G-100 Series.
12.
Service Bulletin No.
PW4G-100-72-253;
Engine — Nuts, Chamber Assembly , Outer Combustion - Replacement Of, With W aspaloy Nuts T o Reduce Nut Liberation.
Issue Sequence 72-253, PW4G-100 Series.
NOTE :
Reference 7 is shown to help find configurations in relation to this bulletin.
NOTE :
References 5, 6, and 8 thru 1 1 are shown to help find non-production configurations that may incorporate this bulletin.
l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 4
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Publications Changed PW4164, PW4168, PW4168A, PW4170 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A343.
72-53-00, Figures 3 and
4.
PW4000 Series T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.
51A357.
Interchangeability Old and new parts are interchangeable only in full sets.
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (Y es) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 5
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Material Information Material — Cost and A vailability
1.
The estimated price of new material to do this Alert Service Bulletin using new replacement parts is $64,592.00.
2.
There is no kit provided to do this Service Bulletin.
3.
Part availability information is provided in material data Instructions — Disposition.
Industry Support Program Not Applicable.
The material data that follows is for each engine.
NOTE :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.
When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .
CAUTION :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
The material data that follows is for each engine.
For PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 50N526-01 22 2936.00 RING
SEGMENT — ASSY OF , AIR
SEALING, LPT , 4STG 50N463-01 (72-53-00-5-50)
(2)(A)(N) OR 22 2936.00 RING
SEGMENT — ASSY OF , AIR
SEALING, LPT , 4STG 50N526-01 (72-53-00-5-50 A) (C) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.
l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 6
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Parts Modification Conditions
(2) The new part is a replacement part only , and cannot be obtained by modification of the old part.
Spare Parts A vailability (A) The new part is available.
(C) The old part will continue to be supplied.
(N) The old part is not available.
V endor Services or Special Components/Materials Not Applicable.
Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.
Reidentified Parts Not Applicable.
Necessary T ools No more Support Equipment is necessary .
Other Material Information Data Not Applicable.
l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 7
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Accomplishment Instructions
1.
Replace the twenty-two
(22) LPT 4th Stage Air Sealing Ring Segment Assemblies, PN 50N526-01 or PN 50N463-01, with new LPT 4th Stage Air Sealing Ring Segment Assemblies, PN 50N526-01.
See Figure
1.
NOTE :
The LPT 4th stage air sealing ring segment assemblies are the same for the PW4000-94 and PW4000-100 engine models.
Y ou cannot use LPT 4th stage air sealing ring segment assemblies again in PW4000-94 or PW4000-100 engine models after you remove them.
2.
Do a dimensional inspection of the LPT case for bulging by Method A or Method B.
Y ou must complete Method A or Method B as follows.
See Figure
2.
A.
Method A — Do a dimensional inspection of the LPT 4th stage vane drop dimension as follows.
Refer to Reference 4, CIR Manual, Chapter/Section 72-53-17, Check-04.
(1) Position the PW A 85690 Gage into the LPT 4th stage vane retaining rail.
Apply light hand pressure rearward to seat the Gage.
(2) Put the parallel bar across the LPT case front flange.
(3) Make a measurement at forty-four
(44) equally spaced locations.
Y ou must make an analysis of each location individually .
It is not permitted to use averages.
(4) If one or more of the measurements from Step
2.A.3 is not in the limits specified by table 802, Index 2, do a check of the measurements for Index 20 and 27 specified in T able
1.
Refer to Reference 4, CIR Manual, Chapter/Section 72-53-17, Check-04.
(5) If Index 20 and 27 is not in the serviceable limits, you must repair the LPT case by the repair specified in T able
1.
B.
Method B — Do a dimensional inspection of Index 20 and Index
27.
If the results are not within the permitted limits, you must repair the LPT case as specified.
See T able
1.
l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 8
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
T ABLE 1:
SER
VICEABLE LIMITS AND REP AIR Examine Serviceable Limits Repairable Limits Repair 20
0.870 inch
(22.098 mm) maximum measured at forty-four
(44) positions of equal distance.
Each location must be evaluated individually .
A veraging is not permissible.
0.898 inch
(22.809 mm) maximum.
-20, -48, -60, -79 27
0.040 inch
(1.016 mm) maximum measured at fourty-four
(44) positions of equal distance.
Each location must be evaluated individually .
A veraging is not permissible.
-79 l October 22/19 PW4G-100-A72-262
REVISION NO.
1 - September 3/20 Page 9
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Pratt & Whitney A United Technologies Company 50N463-01 OR 50N526-01 LPT 4TH STAGE AIR SEALING
RING SEGMENT ASSEMBLY
REPLACE WITH 50N526-01 (22 LOCATIONS) B529217 LOCATION OF THE LPT 4TH STAGE AIR SEALING RING SEGMENT ASSEMBLY 72-53-00 FIGURE 1 October 22/19 PW4G-100-A72-262 I REVISION NO. 1 - September 3/20 Page 10
UTC/P&W PROPRIETARY INFORMATION Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).