STC SA02246LA

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SAO2246LA This certificate issued to: William M. Berle 21033 Strathern St.

Canoga Park, CA 91304 Part *3 of the Civil Air Regulationd.

Original Product Type Certificate Number: **See attached FAA Approved Model List (AML) Make: *No. SA02246LA for list of approved aircraft Model: *models and applicable airworthiness regulations.

Installation of a flap handle extension in accordance with FAA Approved Model List (AML) SA02246LA, dated August 5, 2009, or later FAA approved revision.

Limitations and Conditions: The installation should not be incorporated in any airplane unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the airplane. The approval of this modification applies to the above noted airplane model series only. If the holder agrees to permit another person to use this certificate to alter their airplane, the holder shall give the other person written evidence of that permission. See continuation sheet.

suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of Application: May 6, 2009 Date Reissued:

Date of Issuance: August 5, 2009 Date Amended:

FEDERAL AVIATION By Direction of the Administrator TOMINSTRATOR Manager, Airframe Branch (Signature) Los Angeles Aircraft Certification Office (Title)