STC SA1078NE

Supplemental type certificate · Leading Edge Group LLC, The

Holder
Leading Edge Group LLC, The · United States
Status
Current · Reissued
Status date
April 27, 2009
Applied
August 20, 1992
Product
Aircraft · Large Multi-Engine
Certification basis
Part 21, Part 25
Data sheet
TCDSA16WE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

ONE ONLY STC; SN 22600: Installation of 1080-gallon, 3-tank auxiliary fuel system in forward cargo compartment. Limited to installation on serial number 22600 ONLY.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA1078NE

This certificate issued to

Part 25 of the Federal Aviation Regulations.

Installation of 1080-gallon, 3-tank auxiliary fuel system in forward cargo compartment in accordance with PATS, Inc. Master Drawing List No. 300-1-015, Rev. C dated February 25, 1993.

1. PATS, Inc. Flight Manual Supplement No. 10, FAA approved April 9, 1993 is required for this installation.

2. Auxiliary fuel tanks are life limited to 13 years time in service.

(See STC Continuation Sheet Page 2)

The Leading Edge Group, LLC 5400 Carillon Point Kirkland, WA 98033 A16WE Make : Boeing Model : 737-200 Date reissued : May 14, 2004, April 27, 2009

( Signature) Anthony Socias Manager New York Aircraft Certification Office

( Title)

Date of application : August 20, 1992

Date of issuance : April 9, 1993

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SA1078EA Date of Reissuance: May14, 2004

Limitations and Conditions: (Cont.):

3. This installation is limited to aircraft serial number 22600 with executive interior per Associated Air Center Drawing No.

B737-200-00256-01.

4. PATS, Inc. Maintenance Manual Report No. TO-304 for B-737 three tank auxiliary fuel system, dated March 12, 1993.

5. Descriptive data pertaining to this design change are considered inadequate for duplication in other products. This approval is limited to only the installation made in Boeing, 737-200, S/N 22600.

6. The installer must determine whether this design change is compatible with previously approved modifications.

7. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

… End …

ADs that name this STC · 2

An AD can apply because an STC is installed, or mention one in its text.

Approved models · 1

MakeModelData sheet
The Boeing Company737-200 SeriesA16WE