STC SA1266NW

Supplemental type certificate · USDA Forest Service

Holder
USDA Forest Service · United States
Status
Current · Reissued
Status date
April 10, 1995
Applied
May 14, 1981
Product
Aircraft · Small Airplane
Certification basis
Part 21
Data sheets
TCDS5A6TCDS3A24

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of a camera door, P/N CA1010

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA1266NW This certificate issued to: USDA Forest Service Part * of the * Regulations.

Original Product - Type Certificate Number: *See attached Approved Model List (AML) No. SA1266NW Make:

Description of Type Design Change: Installation of a camera door, Part Number CA1 010, in the left side of the aircraft, constructed in accordance with Coast Airmotive, Inc., photographs 1 through 4 and installed in accordance with Coast Airmotive, Inc., Installation Instructions dated May 14, 1981.

Limitations and Conditions: . Approval of this change in type design applies to the aircraft models listed on the AML only. This approval should not be extended to aircraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. OPERATIONS WITH THE CAMERA DOOR P/N CA1 010 INSTALLED ARE LIMITED TO THE RESTRICTED CATEGORY ONLY. A copy of this Certificate, AML SA1266NW, and the appropriate FAA Approved Supplemental Flight Manual or FAA Approved Airplane Flight Manual Supplement dated June 24, 1981, shall be maintained as part of the permanent records for the modified aircraft.

Date of Application: May 14, 1981 Date Reissued: April 10, 1995 Date of Issuance: June 24, 1981 Date Amended:

EDERAL KVATION y direction o the Slaminist 10 .

(Signanire) *OMANST RATIOD Acting Manager, Seattle Aircraft Certification Office (Title)

FAA FORM B110-2(10-68)

AML AMENDMENT DATE Manager, Special Certification Branch, ANM-190S AFM SUPPLEMENT NO. &DATE Airplane Flight Manual Supplement dated 06/24/81 Airplane Flight Manual Supplement dated 06/24/81 Seattle Aircraft Certification Office AML) NO. SA1266NW REVISION NO. AND DATE N/A N/A Reissued: April 10, 1995 'RVICE INSTALLATION OF A CAMERA DOOR PART NUMBER CA1 010 FAA SEALED DRAWING/ DRAWING LIST NO. Installation Instruction dated 05/14/81 Installation Instruction dated 05/14/81 FAA Approved USDA FORES FAA APPROVED MODEL L. FOR CERT. BASIS FOR ALTERATION CAR 3, dated 11/01/49, as amended by 3-1 through 3/12. (See 5AG) CAR 3, dated 05/15/56, as amended by 3-1 through 3-5 (See 3A24) ORIGINA L TYPE CERT. NO. 5A6 ЗА24 ENGINE MODEL 18OK S/N18052771 through S/N1805300 and S/N1805301 A185F S/N 652, S/N18502091 through S/N18503683 ЕХСЕРТ S/N18502300 and S/N18503684 ENGINE MAKE Cessna Cessna Item

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Cessna Aircraft Company180K5A6
Cessna Aircraft CompanyA185F3A24