- Holder
- Hawker Siddeley Dynamics Limited
- Revision
- 4
- Revised
- March 12, 2007
- Status
- Current
- Product
- Propeller
- Certification basis
- Part 21
- Models
- 1
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| PD143/312/ |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
STCs approved under this data sheet · 2
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
TYPE CERTIFICATE DATA SHEET P-916
P-916
REVISION: 4
de HAVILLAND
MODEL/S: PD-/312/-
March 12, 2007
Propellers of models described herein conforming with this data sheet (which is a part of type certificate No. P-916) and other
approved data on file with the Federal Aviation Agency, meet the minimum standards for use in certificated aircraft in
accordance with pertinent aircraft data sheets and applicable portions of the Civil Air Regulations provided they are installed,
operated and maintained as prescribed by the approved manufacturer's manuals and other approved instructions.
Type Certificate Holder Hawker Siddeley Dynamics Limited
Manor Road
Hatfield, Hertfordshire, England
Type Constant speed; hydraulic (See NOTES 3 and 4)
Engine shaft No. 2 S.B.A.C.
Hub material Steel
Blade material Solid aluminum alloy
Number of blades 3
Propeller types eligible PD143/312/ (See NOTE 1)
Blade Assemblies Maximum
Eligible Continuous Takeoff Nominal Hub and
(See NOTES 1 & 2) HP RPM HP RPM Diameter Blade Weight
PPR2111368T
or 350 2800 400 3000 7'6" 140 lb.
PPR1911368T
Certification basis CAR 10. Type Certificate No. P-916.
The FAA validated this product under U.S. Type Certificate Number P-916. Effective
September 28, 2003, the European Aviation Safety Agency (EASA) began oversight of
this product on behalf of the United Kingdom of Great Britain and Northern Ireland.
TC (Import) No: None
TC Application Date: February 15, 1960
TC Issued : October 31, 1960
Import requirements: To be considered eligible for installation on U.S. registered aircraft, each propeller to be
exported to the United States shall be accompanied by a Certificate of Airworthiness for
export endorsed by the UKCAA on behalf of the European Community which contains
the following language:
(1) This propeller conforms to its United States type design (TC No. P-916) and is in a
condition for safe operation.
(2) This propeller has been subjected by the manufacturer to a final operational check
and is in a proper state of airworthiness. Reference FAR Section 21.500 which provides
for the airworthiness acceptance of aircraft engines or propellers manufactured outside
the U.S. for which a U.S. type certificate has been issued. Additional guidance is
contained in FAA Advisory Circular 21-23, Airworthiness Certification of Civil Aircraft,
Engines, Propellers and Related Products, Imported into the United States. Each
individually imported propeller and replacement parts must be accompanied by the
pertinent Inspection Certificate and Approved Certificate and be clearly identified as
imported.
Page No. 1 2 3
Rev. No. 4 4 4
P-916 Page 2 of 3
NOTE 1. Propeller Type Designation.
Propeller type Designation
PD 143/ 3 1 2/ 1
Minor change not affecting eligibility
S.B.A.C. Propeller Shaft Size
Blade Shank Size
Number of Blades
Major Model Type
Civil Type of Propeller
NOTE 2. Blade Assembly Designation.
Blade Model Designation
PP R 21 1 13 68 S A-110
Blade Assembly Model Designation
Square tip blade
Direction of Rotation (*)
Major Aerodynamic Characteristics
Blade Shank Size
Blade Root Model Designation
Cold rolled Blade Shank
Civil Type of Propeller Blade
*Numbers 00 indicate a right hand rotation.
Numbers 50 indicate a left hand rotation.
NOTE 3. Pitch Control. Eligible with de Havilland Constant Speed Unit Governor only.
NOTE 4. (a) Feathering. Eligible with full feathering control installed in accordance with the propeller
manufacturer's instructions.
(b) Reversing. Not applicable.
NOTE 5. Not applicable.
NOTE 6. Interchangeable Blades. None.
NOTE 7. Accessories.
(1) Propeller Deicing. Eligible with de Havilland fluid deicing equipment PDE 31204 if required.
(2) Propeller Spinner. Eligible with spinner supplied by de Havilland. Weight 13-1/2 lb.
Page 3 of 3
NOTE 8. Not applicable.
NOTE 9. Approved Installations. Propellers listed in this data sheet are approved only for use in the engine-aircraft
combinations shown below:
Propeller Aircraft Engine FAA Data Sheet
Model Model Model Aircraft Engine
PD143/312/- de Havilland De Havilland A-807 E-310
104 Dove Gipsy Queen
70 Mark 3
NOTE 10. Service Information. Each of the documents listed below must state that it is approved by the European
Aviation Safety Agency (EASA) or – for approvals made before September 28, 2003 – by the UKCAA. Any
such documents are accepted by the FAA and are considered FAA approved.
• Service bulletins,
• Structural repair manuals,
• Vendor manuals,
• Aircraft flight manuals, and
• Overhaul and maintenance manuals.
...END...