- Registered owner
- Arnold Sarah D
- Location
- Benton, TN
- Owner type
- Individual
- Serial number
- 984
- Year built
- 1961
- Type
- Glider
- Engine
- None
- Airworthiness
- Standard
- Airworthiness date
- May 29, 1961
- Certificate issued
- June 25, 2015
- Expires
- June 30, 2028
- Mode S code
- A0076A
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 3
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1961 | 1 |
|---|---|
| 1964 | 1 |
| 1975 | 1 |
| 2013 | 1 |
| 2022 | 1 |
Airframe · Schleicher Alexander K 7
AD 2022-12-07Elevator, Spar/Rib StructureAD 2013-16-05Flight ControlsAD 61-13-03Fuselage ModificationSuperseded and historical ADs · 2
Information bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Schleicher Alexander K 7
SAIB ACE-98-10NTSB investigations · 2
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports · 2
FAA accident and incident reports matched to this aircraft by N-number and event date, checked against the reported make and model.
Accident 20140427009459ALanding: Touchdown · Benton, TNOn final approach, airman noticed another glider on runway. Airman raised nose to clear aircraft but failed to lower air brakes. Airspeed decayed and glider landed hard.Accident 19800924044509ALevel Off Touchdown · Montpelier, OHGlider student struck obstruction with wing causing crash short of runway. Spoilers may have stuck on.
Service difficulty reports
No reports matched to N1002ZGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Schleicher Alexander K 7 aircraft
STCs that may be installed · 5
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Schleicher Alexander K 7
STC SA4503NMRemove original cloth covering and install Ceconite coveringSTC SG03715NYIunstallation and maintenance of Oratex 6000 Covering and Coating SystemSTC SG04702NYInstallation and maintenance of Oratex UL600 Covering and Coating SystemSTC SA1008WEInstallation of Poly-Fiber covering material.STC SA1351WEReplace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101 material. (262A Series -12)