- Registered owner
- Port Townsend Aero Museum
- Location
- Port Townsend, WA
- Owner type
- Corporation
- Serial number
- 132
- Year built
- 1937
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard
- Airworthiness date
- March 26, 1964
- Certificate issued
- May 7, 2012
- Expires
- May 31, 2028
- Mode S code
- A11C97
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Lycoming R680E model are included below.
On this page
Airworthiness directives that may apply · 6
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1969 | 1 |
|---|---|
| 1991 | 1 |
| 1996 | 1 |
| 1999 | 1 |
| 2000 | 1 |
| 2004 | 1 |
| 2012 | 1 |
Airframe · Beech C17B
AD 99-05-13 R1 WDWithdrawal of AD 99-05-13Superseded and historical ADs · 1
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports
No FAA accident or incident reports matched to N17074Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Beech C17B aircraft
Service difficulty reports
No reports matched to N17074General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Beech C17B aircraft
STCs that may be installed · 26
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Beech C17B
STC SA04652CHTo allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specificationSTC SA00478CHInstallation of Cooper Superflite 102 Fabric.STC SA02930NYInstallation of Insight Instrument Corporation Graphic Engine Monitor (GEM 610C) models G3, G2, and G1 and 1200C model G4 as primary Cylinder Head Temperature (CHT), Exhaust Gas Temperature (EGT), and Turbine Inlet Temperature (TIT) Instruments