- Registered owner
- Cub Crafters Inc
- Location
- Yakima, WA
- Owner type
- Corporation
- Serial number
- CC19-0114
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Mode S code
- A1C4A6
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 0
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
No ADs matched this aircraft’s modelsADs on appliances, propellers and installed equipment aren’t matched by model; check those separately.
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N213Matched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cub Crafters CC19-215 aircraft
FAA incident reports
No FAA accident or incident reports matched to N213Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cub Crafters CC19-215 aircraft
Service difficulty reports
No reports matched to N213General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cub Crafters CC19-215 aircraft
Reports on N213 not matched to an aircraft · 1
They name N213, but no registry record covers the date, the aircraft registered then was built later, or the report describes another aircraft.
STCs that may be installed · 7
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cub Crafters CC19-215
STC SA12406WIInstallation of a Garmin AXIS Flight Display SystemSTC SA02765SEInstallation of Acme Stinger tailwheel landing gear shock absorberSTC SA39CHInstallation of an Amphibian Landing Gear Position Advisory System/Laser Gear Advisory SystemSTC SA4503NMRemove original cloth covering and install Ceconite coveringSTC SA02576AKInstallation of Cleveland and ABI, LLC Wheel and Brake KitsSTC SA02553AKFabrication and installation of a Tail Wheel Anti-Shimmy DampenerSTC SA1008WEInstallation of Poly-Fiber covering material.
Earlier aircraft with this N-number · 3
These aircraft carried N213 before the one registered now. The FAA can assign a mark to another aircraft once a registration is cancelled.