- Registered owner
- Phillips Stephen N
- Location
- Paradise Valley, AZ
- Owner type
- Individual
- Serial number
- CC19-0109
- Year built
- 2026
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- April 30, 2026
- Certificate issued
- September 16, 2026
- Expires
- September 30, 2033
- Mode S code
- A27A11
Cub Crafters CC19-215TCDS A00053SEAirframe · Cub Crafters CC19-215TCDS E00006NYEngine · Lycoming IO-390-D3B6
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 1
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
Engine · Lycoming IO-390-D3B6
AD 2026-04-11Engine (Reciprocating)Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N259MSMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cub Crafters CC19-215 aircraft
FAA incident reports
No FAA accident or incident reports matched to N259MSMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cub Crafters CC19-215 aircraft
Service difficulty reports
No reports matched to N259MSGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cub Crafters CC19-215 aircraft
STCs that may be installed · 10
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cub Crafters CC19-215
STC SA12406WIInstallation of a Garmin AXIS Flight Display SystemSTC SA02765SEInstallation of Acme Stinger tailwheel landing gear shock absorberSTC SA39CHInstallation of an Amphibian Landing Gear Position Advisory System/Laser Gear Advisory SystemSTC SA4503NMRemove original cloth covering and install Ceconite coveringSTC SA02576AKInstallation of Cleveland and ABI, LLC Wheel and Brake KitsSTC SA02553AKFabrication and installation of a Tail Wheel Anti-Shimmy DampenerSTC SA1008WEInstallation of Poly-Fiber covering material.