- Registered owner
- Heavy Metal Air LLC
- Location
- Farmingdale, NY
- Owner type
- LLC
- Serial number
- CC19-0083
- Year built
- 2023
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- September 25, 2023
- Certificate issued
- February 29, 2024
- Expires
- February 28, 2031
- Mode S code
- A9B478
Cub Crafters CC19-215TCDS A00053SEAirframe · Cub Crafters CC19-215TCDS E00006NYEngine · Lycoming IO-390 series
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Lycoming IO-390 model are included below.
On this page
Airworthiness directives that may apply · 4
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 2009 | 1 |
|---|---|
| 2012 | 2 |
| 2024 | 1 |
| 2026 | 1 |
Superseded and historical ADs · 1
Information bulletins that may apply · 2
Advisory, not mandatory.
NTSB investigations
No NTSB investigations matched to N724XCMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cub Crafters CC19-215 aircraft
FAA incident reports
No FAA accident or incident reports matched to N724XCMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cub Crafters CC19-215 aircraft
Service difficulty reports
No reports matched to N724XCGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cub Crafters CC19-215 aircraft
STCs that may be installed · 13
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cub Crafters CC19-215
STC SA12406WIInstallation of a Garmin AXIS Flight Display SystemSTC SA02765SEInstallation of Acme Stinger tailwheel landing gear shock absorberSTC SA39CHInstallation of an Amphibian Landing Gear Position Advisory System/Laser Gear Advisory SystemSTC SA4503NMRemove original cloth covering and install Ceconite coveringSTC SA02576AKInstallation of Cleveland and ABI, LLC Wheel and Brake KitsSTC SA02553AKFabrication and installation of a Tail Wheel Anti-Shimmy DampenerSTC SA1008WEInstallation of Poly-Fiber covering material.
Engine · Lycoming IO-390 series
STC SE00825WIInstallation of Specialty Products Spin-on oil filter on Lycoming Engines.STC SE04349CHInstallation of SureFly electronic ignitionSTC SE02352CHInstallation of Challenger cleanable oil filter assemblySTC SE03232CHInstallation of Engine Preheat Kit p/n TA2925-1 for 115 volt applicationSTC SE04577CHInstall an electronic engine ignition systemSTC SE01966WIUse of GAMI G100UL High Octane Unleaded Avgas in spark ignition piston aircraft engines