- Manufacturer (registry)
- GE
- Model
- CT58-110-1
- Registry code
- 30126
- Installed in
- 0 registered aircraft
- Type
- Turbo-shaft
- Power
- 1,250 hp
- Data sheet
- TCDS1E3
- Holder
- General Electric Company
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 11
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1966 | 1 |
|---|---|
| 1969 | 1 |
| 1970 | 1 |
| 1976 | 2 |
| 1978 | 1 |
| 1981 | 2 |
| 1994 | 1 |
| 1997 | 2 |
| 2001 | 1 |
| 2008 | 1 |
| 2015 | 1 |
Engine · GE CT58-110-1
AD 2015-20-09Life-limited rotating partsAD 97-21-08Stage 1 forward cooling plateAD 97-19-17Critical rotating partsAD 94-07-05Turbine WheelsAD 81-18-03Fuel ControlsAD 81-02-02Stage One Turbine WheelsAD 78-26-08Lube Pump Drive ShaftAD 67-01-02Rotor DiscsAD 76-13-02Oil Cooler-To-Fuel Filter HoseAD 69-17-03First and Second Stage Turbine Rotor DiscsAD 64-26-02Starter Drive Shaft BearingSuperseded and historical ADs · 4
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30126'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30126'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 0
No aircraft currently registered with this engine model
NTSB investigations
No NTSB investigations matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 2
SDR CHIR20110902001Pin · wornCENTRIFUGAL PURIFIER RECEIVED FOR REPAIR DUE TO REPORTED LOOSE SHAFT. DISCREPANCY CONFIRMED AND FOUND PIN HOLDING SHAFT IN PLACE SEVERELY WORN.SDR CA960709001Drive Spline · damaged(CAN) DURING AN ATTEMPTED START, THE STARTER MOTOR WOULD NOT ENGAGE. ON REMOVING STARTER, ENGINE SIDE OF ENGAGE DRIVE BECAME UNATTACHED.
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CT581101' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CT581101' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.