NTSB investigations, MN
8 cases where the sequence of events included Powerplant sys/comp malf/fail.
Cases per year
| 2008 | 1 |
|---|---|
| 2010 | 1 |
| 2011 | 2 |
| 2012 | 1 |
| 2013 | 1 |
| 2014 | 1 |
| 2024 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'MN' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s.\"tier2Number\" = '340' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE \"isDefiningEvent\"))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'MN' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s."tier2Number" = '340' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE "isDefiningEvent")) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN24LA242Accident · No injuriesClass 3 · LimitedFinal reportCessna 310R · Duluth, MNThe failure of the left engine induction coupling during takeoff, which resulted in a total loss of left engine power and an uncommanded left yaw/roll due to asymmetrical thrust and increased drag, from which the pilot had insufficient altitude to recover…NTSB CEN14LA486Accident · No injuriesLimited investigationFinal reportCirrus Design SR22 · Langola Township, MNMaintenance personnel’s failure to apply sufficient torque on the throttle control lever nut, which resulted in a loss of throttle control and subsequent loss of engine power.NTSB CEN13CA262Accident · Minor injuriesData collectionFinal reportEngineering & Research 415-C · Little Falls, MNThe failure of the airplane's throttle cable.NTSB CEN12CA597Accident · No injuriesData collectionFinal reportBordelon Bruce Kitfox IV · Castlerock, MNPropeller system failure during a go-around maneuver resulting in a forced landing. Contributing to the severity of damage to the airplane was the postimpact fire.NTSB CEN12CA035Accident · Minor injuriesData collectionFinal reportHouts Avid Mark IV · Hibbing, MNThe improper installation of a hose clamp, which resulted in an oil line rupture and subsequent loss of engine oil pressure.NTSB CEN11LA370Accident · Serious injuriesLimited investigationFinal reportBell 47G-3B-1 · Lakeville, MNThe loss of engine power due to a loose B-nut on the compressor discharge pressure bleed line.NTSB CEN10LA188Accident · Serious injuriesLimited investigationFinal reportBeech 95 · Eden Prairie, MNThe fatigue failure of an intake valve spring on the right engine, which resulted in a partial loss of engine power on takeoff.NTSB CHI08LA154Accident · No injuriesLimited investigationFinal reportBeech A36 · Grand Rapids, MNA loss of engine thrust due to the propeller separating from the aircraft as a result of fatigue failure of the propeller attachment bolts caused by the insufficient torque of the bolts during installation.