NTSB investigations, TX
11 cases where NTSB found Main rotor system.
Cases per year
| 2009 | 2 |
|---|---|
| 2010 | 1 |
| 2011 | 1 |
| 2013 | 2 |
| 2014 | 2 |
| 2015 | 2 |
| 2016 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'TX' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010462'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'TX' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010462')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB DCA16FA199Accident · 2 fatalClass 2 · FieldFinal reportBell 525 · Italy, TXA severe vibration of the helicopter that led to the crew's inability to maintain sufficient rotor rotation speed (Nr), leading to excessive main rotor blade flapping, subsequent main rotor blade contact with the tail boom, and the resultant in-flight…NTSB CEN16LA040Accident · Minor injuriesLimited investigationFinal reportRobinson Helicopter R22 Beta · Sugarland, TXThe overspeed of the main rotor system for reasons that could not be determined based on the available information.NTSB GAA15LA191Accident · Minor injuriesLimited investigationFinal reportCelier Xenon RST · Livingston, TXThe pilot’s loss of directional control after aborting the takeoff due to a grinding noise coming from the main rotor area, which resulted in a runway excursion.NTSB CEN14LA465Accident · No injuriesLimited investigationFinal reportBell 206B · Spring, TXThe pilot's distraction by a cell phone call, which led to his failure to perform an exterior check of the helicopter and resulted in a tie-down strap remaining attached to the main rotor during the engine start.NTSB CEN14TA116Accident · Minor injuriesFinal reportAutogyro Mtosport · Spring, TXThe pilot’s failure to maintain the gyroplane’s rotor control during the landing roll in gusting crosswind conditions.NTSB CEN14LA056Accident · 1 fatalLimited investigationFinal reportPearson Jon M Dragonfly · Anahuac, TXThe incorrect installation by the pilot, who was not a certificated mechanic or repairman, of the main rotor head bearing block, which resulted in the in-flight separation of the rotor head.NTSB CEN13LA437Accident · Serious injuriesLimited investigationFinal reportEnstrom F-28A · Danbury, TXThe loss of collective control for reasons that could not be determined due to extensive fire damage.NTSB CEN11FA422Accident · 1 fatalField investigationFinal reportRobinson R22 Beta · Del Valle, TXThe divergence of the main rotor from its normal plane of rotation for reasons that cannot be determined because the pilot’s control inputs leading up to the event are unknown, resulting in mast bumping and main rotor blade separation.NTSB CEN10FA291Accident · 2 fatalField investigationFinal reportBell 222 · Midlothian, TXThe fracture of a swashplate drive pin as a result of hydrogen embrittlement due to an unknown source, which resulted in an in-flight breakup of the main rotor system during cruise flight.NTSB CEN09IA234Incident · No injuriesIncident investigationFinal reportBell 206L-3 · Abilene, TXThe formation and propagation of a fatigue crack in the trailing edge of the main rotor blade due to interconnected porosity and resultant corrosion. The area of interconnected porosity was due to a manufacturing defect which was not detected during the…NTSB CEN09CA180Accident · Minor injuriesData collectionFinal reportRobinson Helicopter R22 Beta · O'Donnell, TXThe pilot's failure to maintain control while performing a quick stop maneuver to an out of ground effect (OGE) hover. Contributing to the accident was the high density altitude and near calm wind condition.