NTSB investigations: Continental IO-520 series, CA
405 cases on aircraft whose registry engine model is Continental IO-520 series. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases, newest first
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'CA' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17032'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'CA' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17032'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR12LA027Accident · No injuriesLimited investigationFinal reportBeech A36 · Yucca Valley, CAA loss of engine power for reasons that could not be determined because postaccident examination did not reveal any anomalies that would have precluded normal operation.NTSB WPR11LA410Accident · Minor injuriesLimited investigationFinal reportBeech A36 · Napa, CAThe pilot’s mismanagement of the fuel supply, which resulted in a loss of engine power due to fuel starvation.NTSB WPR11LA283Accident · No injuriesLimited investigationFinal reportBeech A36 · El Monte, CAThe pilot's failure to maintain adequate airspeed during the forced landing, which resulted in an aerodynamic stall and hard landing. Contributing to the accident was the loss of engine power due to fuel starvation as a result of the pilot's improper fuel…NTSB WPR11FA090Accident · 2 fatalField investigationFinal reportBeech S35 · Chester, CAThe pilot's loss of control while maneuvering to land, most likely due to spatial disorientation.NTSB WPR10LA408Accident · No injuriesLimited investigationFinal reportBeech V35B · Sacramento, CAA total loss of engine power during descent due to fuel exhaustion as a result of the pilot's failure to ensure that the fuel cap was secured during the preflight inspection.NTSB WPR10LA248Accident · Minor injuriesLimited investigationFinal reportCessna 210 · Arbuckle, CAInsufficient clamping force to the connecting rod bolt, which resulted in looseness in the connecting rod bearing area that led to the fatigue fracture of the connecting rod and a subsequent loss of engine power.NTSB WPR10FA136Accident · 3 fatalField investigationFinal reportCessna 310R · Palo Alto, CAThe pilot’s failure follow the standard instrument departure as instructed, and his failure to attain a sufficient altitude to maintain clearance from power lines during takeoff in instrument meteorological conditions.NTSB WPR10FA056Accident · 1 fatalField investigationFinal reportBeech A36 · San Gabriel, CAFailure of the exhaust band V-clamp during cruise flight, which resulted in an in-flight fire and a subsequent forced landing.NTSB WPR09LA432Accident · Serious injuriesLimited investigationFinal reportCessna P206B · Truckee, CAThe pilot’s failure to maintain adequate airspeed for flight, which resulted in an aerodynamic stall and subsequent impact with the ground. Contributing to the accident was the intermittent failure of the stall warning system due to a contaminated switch.NTSB WPR09CA441Accident · No injuriesData collectionFinal reportCessna T210H · Avalon, CAThe pilot's failure to maintain airspeed during approach to landing, which resulted in a hard landing.NTSB WPR09LA230Accident · Minor injuriesLimited investigationFinal reportCessna T210G · Santa Rosa, CAA total loss of engine power on final approach for undetermined reasons.NTSB WPR09LA208Accident · Serious injuriesLimited investigationFinal reportBeech V35B · Groveland, CAA loss of engine power for undetermined reasons.NTSB WPR09CA180Accident · No injuriesData collectionFinal reportBeech A36 · Sonoma, CAThe pilot's failure to maintain directional control.NTSB WPR09FA112Accident · 3 fatalField investigationFinal reportBeech A36 · Avalon, CAThe pilot’s failure to follow the published instrument departure procedures during the climb to cruise, and loss of control in instrument meteorological conditions. Contributing to the accident was the pilot’s lack of total experience in instrument…NTSB WPR09FA061Accident · 2 fatalField investigationFinal reportBeech V35 · Warner Springs, CAThe failure of the pilot to maintain clearance from terrain during a low altitude maneuver.NTSB WPR09CA018Accident · Minor injuriesData collectionFinal reportBeech F33A · Big Bear, CAThe pilot's failure to maintain directional control of the airplane during landing.NTSB LAX08FA300Accident · 1 fatalField investigationFinal reportBeech A36 · Carlsbad, CAThe pilot's failure to maintain control during the instrument approach and attempted go-around.NTSB LAX08FA152Accident · 4 fatalField investigationFinal reportBeech V35B · Fall River Mills, CAThe pilot's failure to maintain adequate airspeed while maneuvering for landing, resulting in an aerodynamic stall.NTSB LAX08LA146Accident · No injuriesLimited investigationFinal reportCessna P206A · Hollister, CAThe pilot's failure to maintain physical clearance from the other airplane while taxiing.NTSB LAX08LA088Accident · Minor injuriesLimited investigationFinal reportBeech F33A · San Diego, CAA loss of engine power due to fuel starvation as a result of the pilot's improper use of the mixture control.NTSB LAX08FA047Accident · 1 fatalField investigationFinal reportBeechcraft V35B · Selma, CAThe pilot's failure to maintain control resulting in the in-flight break-up of the airplane due to aerodynamic overload. Contributing factors included the pilot's impairment due to multiple medical conditions and due to recent use of alcohol.NTSB LAX08CA021Accident · No injuriesData collectionFinal reportBeech A36 · Camarillo, CAThe pilot's failure to maintain an adequate airspeed during a go-around, which resulted in a stall.NTSB LAX07CA275Accident · Minor injuriesData collectionFinal reportCessna U206G · Fort Bragg, CAThe pilot's misjudged speed and distance, which resulted in a landing overrun of the runway.NTSB SEA07LA253Accident · No injuriesLimited investigationFinal reportBeech F33A · La Verne, CAAn improper flare during touchdown and an inadequate bounced landing recovery. Contributing to the accident was an excessive airspeed and an inadvertent porpoise.NTSB SEA07FA228Accident · 1 fatalField investigationFinal reportCessna T210G · Lomita, CAThe loss of engine power during approach as a result of fuel starvation due to the pilot's improper pre takeoff fuel system selector valve positioning. Contributing to the accident was the lack of suitable terrain for the forced landing.NTSB LAX07LA221Accident · No injuriesLimited investigationFinal reportBeech 58 · Chino, CAThe pilot's failure to ensure the landing gear selector handle was in the extended position prior to departure, which resulted in a premature retraction.NTSB LAX07LA119Accident · No injuriesLimited investigationFinal reportCessna 320E · Stockton, CAThe landing gear collapsed during taxi as a result of incorrect rigging of the landing gear by other maintenance personnel that prevented the landing gear downlock from functioning as designed.NTSB LAX07LA065Accident · Serious injuriesLimited investigationFinal reportBeech A36 · Lake Hughes, CAThe pilot's inadequate preflight planning/preparation and attempted flight into known adverse weather during cruise, and his failure to maintain an adequate airspeed margin that resulted in a stall/spin. Turbulence was a factor.NTSB LAX06LA249Accident · Minor injuriesLimited investigationFinal reportBeech V35B · Independence, CAthe pilot's inadequate preflight and in-flight planning regarding the selection of the altitude and route of flight, which resulted in a collision with terrain in a box canyon after encountering mountain wave.NTSB LAX06LA225Accident · No injuriesLimited investigationFinal reportCessna 210K · Novato, CAThe failure of the left main landing gear to extend for undetermined reasons.NTSB LAX06LA210Accident · No injuriesLimited investigationFinal reportBeech A36 · Schellville, CAThe pilot's failure to maintain directional control during the landing rollout.NTSB LAX06CA179Accident · No injuriesData collectionFinal reportCessna A185F · Columbia, CAthe pilot's inadequate compensation for the crosswind condition and his failure to maintain directional control during the landing rollout.NTSB LAX06LA175Accident · Minor injuriesLimited investigationFinal reportCessna 210J · Redding, CAFuel starvation due to the pilot's inaccurate fuel consumption calculations and inadequate fuel system management.NTSB LAX06FA129Accident · 2 fatalField investigationFinal reportBeech A36 · Santa Monica, CAThe failure of an aviation maintenance technician to properly torque and cotter pin the number 2 connecting rod bolts at their attach point to the crankshaft, which resulted in the separation of the connecting rod in flight, and complete power loss.NTSB LAX06FA113Accident · Serious injuriesField investigationFinal reportCessna 210M · Long Beach, CAan erroneous low fuel quantity indication that led the pilot to attempt a precautionary landing in a congested and less than ideal location. The erroneous fuel level indication was due to multiple anomalies with the alternator installation that precipitated a…NTSB LAX06FA075Accident · 3 fatalField investigationFinal reportBeech V35A · Valley Center, CAthe pilot's failure to maintain an adequate airspeed margin following a loss of engine power in the takeoff initial climb, resulting in a stall/spin. While the laboratory tests indicated the presence of an unknown biological contaminant in the fuel manifold…NTSB LAX06FA066Accident · 2 fatalField investigationFinal reportBeech 36 · Livermore, CAThe pilot's failure to maintain the appropriate glidepath alignment during an instrument landing system approach, resulting in collision with terrain. A contributing factor to the accident was the failure of the air traffic controllers to issue a minimum safe…NTSB LAX06LA065Accident · No injuriesLimited investigationFinal reportBeech F33A · La Verne, CAthe failure of the pilot of the other aircraft to comply with his air traffic control clearance and line up for the proper runway, and his failure to maintain an adequate visual lookout, which resulted in his in-flight collision with the Cessna airplane.NTSB LAX06FA031Accident · 1 fatalField investigationFinal reportBeech F33A · Geyserville, CAthe pilot's failure to maintain an adequate terrain clearance altitude profile during the descent that resulted in controlled flight into terrain.NTSB LAX06CA008Accident · No injuriesData collectionFinal reportBellanca 17-30A · Riverside, CAThe failure of the steering control rod during an unknown phase of the accident flight that resulted in the unavailability of steering control upon landing.NTSB LAX05LA317Accident · No injuriesLimited investigationFinal reportCessna A185F · Tracy, CAloss of engine power for undetermined reasons.NTSB LAX05CA287Accident · No injuriesData collectionFinal reportCessna A185E · San Andreas, CAthe pilot's failure to maintain directional control of the airplane upon encountering a dust devil during the takeoff roll.NTSB LAX05LA237Accident · No injuriesLimited investigationFinal reportCessna A188B · Bishop, CAthe failure of the tailwheel mount during the landing roll, which resulted in a ground loop.NTSB LAX05LA140Accident · Serious injuriesLimited investigationFinal reportBeech 35-C33A · Paso Robles, CAthe separation of the number 4 engine cylinder due to improperly torqued cylinder hold down nuts. A finding in this accident was the lack of a shoulder restraint system in the airplane, which contributed to the occupants' injuries.NTSB LAX05FA108Accident · No injuriesField investigationFinal reportCessna 210L · Oxnard, CAA pinhole leak in the fuel pressure line during the takeoff roll that was ignited by an electrical arc associated with wires adjacent to the fuel line. A contributing factor in the accident was the failure of maintenance personnel to comply with a…NTSB LAX05FA034Accident · 2 fatalField investigationFinal reportBeech A36 · Lake Havasu, CAthe pilot's continued visual flight into instrument meteorological conditions leading to spatial disorientation and an in-flight loss of control.NTSB LAX04LA312Accident · No injuriesLimited investigationFinal reportBeech F33A · Fresno, CAthe pilot's loss of pitch control authority during landing flare due to an autopilot system failure that inhibited control yoke movement. A factor was inadequate autopilot system maintenance.NTSB LAX04CA278Accident · No injuriesData collectionFinal reportCessna A185F · Gridley, CAThe pilot's improper use of the rudder to correct for torque and P-factor effects and failure to maintain obstacle clearance.NTSB LAX04FA271Accident · 3 fatalField investigationFinal reportBeech 58 · Bishop, CAthe pilot's continued VFR flight into marginal weather conditions with lowering ceilings in a box canyon in mountainous terrain, and his subsequent inability to maintain an adequate airspeed while maneuvering to reverse direction, which led to an accelerated…NTSB LAX04LA170Accident · No injuriesLimited investigationFinal reportCessna 188B · Planada, CAthe partial loss of engine power due to the separation of the number 5 cylinder fuel injector supply line. The fuel line separation was due to company maintenance personnel's failure to secure the b-nut fitting following maintenance. Factors in the accident…