NTSB investigations, CO
7 cases where the first occurrence was “Abrupt maneuver”.
Cases per year
| 1983 | 1 |
|---|---|
| 1986 | 1 |
| 1991 | 1 |
| 1997 | 1 |
| 2001 | 1 |
| 2003 | 1 |
| 2005 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'CO' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT o.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_occurrences.parquet' o WHERE o.\"occurrenceNumber\" = 1 AND o.\"occurrenceCode\" = 100)
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'CO' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT o.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_occurrences.parquet' o WHERE o."occurrenceNumber" = 1 AND o."occurrenceCode" = 100) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB DEN05LA093Accident · No injuriesLimited investigationFinal reportCessna 172N · Hudson, COThe flight instructor's improper use raising of the flaps. Contributing factors were the student pilot's misunderstanding of the instructor's intentions, the instructor's inadequate supervision of the student pilot, the density altitude, and the soft terrain.NTSB DEN03LA154Accident · No injuriesLimited investigationFinal reportBellanca 7ECA · Byers, COThe pilot not maintaining adequate clearance from the ground and his improper in-flight planning/decision. Factors contributing to the accident were the tailwind, the low altitude, the tree, the people, the embankment, and the ravine.NTSB DEN01FA044Accident · 2 fatalField investigationFinal reportAero Vodochody Aero. Works L-39CT · Watkins, COThe pilot's failure to maintain aircraft control, and the subsequent inadvertent stall/mush. Factors were the pilot's diverted attention due to the failure of the rear canopy's acrylic transparency and the loss of communication with his back seat passenger,…NTSB FTW97FA207Accident · 1 fatalField investigationFinal reportCanadair F-86E MK.6 · Broomfield, COInadequate planning and decision making by the pilot in starting the aerobatic maneuver at an insufficient altitude to successfully complete the maneuver.NTSB DEN91LA122Accident · No injuriesLimited investigationFinal reportStinson 108 · Steamboat Sprin, COA swerve initiated by the pilot in command to avoid a collision with a deer during takeoff roll.NTSB DEN86FA252Accident · 1 fatalField investigationFinal reportCessna 172M · Bennett, COThe plt, a bail bondsman, flew to goodland, KS, reportedly in search of an accused felon. On the afternoon of the accident, the plt obtained a wx briefing from the fss and filed a VFR flt plan back to the brighton-van aire airport in Colorado. Wx was cavu.…NTSB DEN83FTE05Accident · No injuriesFinal reportSchweizer 1-36 · Colo Springs, COThe glider was substantially damaged during a pullup from a dive at altitude. The wing was rippled and beckled and damaged at the attach points. The dihedrial had changed from 6 degrees to 8.5 degrees. There was also unmeasured change in the sweepback. It is…