- Registered owner
- Morozowsky Anthony M
- Location
- Zanesville, OH
- Owner type
- Individual
- Serial number
- 188
- Year built
- 1940
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- September 28, 1946
- Certificate issued
- December 19, 2017
- Expires
- December 31, 2027
- Mode S code
- A236FB
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 1
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
Airframe · Funk B
AD 75-12-05Support Struts and LongeronsInformation bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N24162Matched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Funk B aircraft
FAA incident reports
No FAA accident or incident reports matched to N24162Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Funk B aircraft
Reports on N24162 not matched to an aircraft · 2
They name N24162, but no registry record covers the date, the aircraft registered then was built later, or the report describes another aircraft.
Service difficulty reports
No reports matched to N24162General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Funk B aircraft
STCs that may be installed · 14
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Funk B
STC SA04652CHTo allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specificationSTC SA7965SWApplication of fabric and polyurethane finishing system.STC SA01757WITo allow the use of UL91 or UL94 (minimum) grade aviation fuelSTC SA01967WIUse of GAMI G100UL High Octane Unleaded AvgasSTC SA04776NYThe HIPEC Covering and Finishing System must be performed and maintainedSTC SA01831WITo allow the use of UL91 (minimum) grade aviation fuelSTC SA02503AKInstallation of AMSAFE State of the Art Restraint System (SOARS) inflatable restraintsSTC SA11172SCInstallation of an ADS600-B Automatic Dependent Surveillance-Broadcast (ADS-B) Universal Access Transceiver (UAT) and Global Positioning System (GPS) antennaSTC SA00478CHInstallation of Cooper Superflite 102 Fabric.STC SA02033ATModification to install an air-oil separator to prevent oil from being aspirated from the engine breather line.STC SA8075SWInstallation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER)STC SA5755NMInstallation of a propeller anti theft device.STC SA1351WEReplace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101 material. (262A Series -12)