Bell 206L-3
NTSB investigations · 93
Matched to the registry by N-number and event date, newest first.
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
WHERE a.aircraft_model_code IN ('1182108')
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c."mKey" = a.case_mkey
WHERE a.aircraft_model_code IN ('1182108')
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB ERA26LA285Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Tuscumbia, ALThe pilot’s failure to keep the tail rotor clear of an obstacle while attempting to land.NTSB WPR26LA086Accident · Serious injuriesClass 4 · LimitedFinal reportBell 206L-3 · Logsden, ORThe inadvertent entanglement of a long line with the skid, which resulted in a loss of flight control. Contributing to the accident was the use of nylon lines instead of steel cables to secure the bucket.NTSB ERA25FA005Accident · 3 fatalClass 3 · FieldPreliminary reportBell 206L-3 · Owenton, KYOn October 7, 2024, at 1730 eastern daylight time, a Bell 206L3+, N230AE, was destroyed when it was involved in an accident in Owenton, Kentucky. The pilot, a flight nurse, and a flight medic were fatally injured. The helicopter was operated by Air Evac Life…NTSB CEN24LA259Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Thorntown, INThe pilot’s failure to ensure that the load hose was disconnected from the helicopter before takeoff, which resulted in a loss of control after liftoff and a hard landing.NTSB WPR24LA134Accident · No injuriesClass 3 · LimitedFinal reportBell 206L-3 · Tracy, CAA loss of collective control authority due to fatigue failure of the collective servo cylinder extension arms from corrosion pitting.NTSB CEN24FA094Accident · 3 fatalClass 3 · FieldFinal reportBell 206 · Hydro, OKThe helicopter’s inflight collision with cackling geese, resulting in an inflight breakup.NTSB CEN23LA350Accident · No injuriesClass 3 · LimitedFinal reportBell 206 · Carthage, ILA collision with a fence during landing due to the crew’s reduced distance estimation and depth perception while using night vision goggles. Contributing to the accident was the low moon angle, which made viewing the fence more challenging.NTSB ERA22LA347Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Franklin, PAThe pilot’s inadequate visual lookout while flying at a low level over a river, which resulted in a wire strike.NTSB WPR22LA031Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Covelo, CAA passenger’s unsecured object departed the cabin resulted in a collision with the tail rotor drive shaft.NTSB WPR21LA338Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Tillamook, ORThe pilot's failure to maintain clearance from a powerline during a low reconnaissance, with sun glare.NTSB CEN21LA432Accident · No injuriesClass 4 · LimitedFinal reportBell 206L-3 · Berlin, ILThe pilot’s failure to maintain control of the helicopter with a stuck skid, which resulted in a dynamic rollover.NTSB WPR21LA133Accident · Minor injuriesClass 4 · LimitedFinal reportBell 206 · Lucerne Valley, CAThe pilot's failure to maintain aircraft control while maneuvering with a tailwind, resulting in the helicopter spinning and colliding with terrain.NTSB WPR20LA163Accident · 3 fatalClass 3 · LimitedFinal reportBell 206 · Fairfield, CAThe pilot’s failure to maintain adequate clearance from powerlines while conducting external load operations, which resulted in the main rotor contacting a wire and a subsequent collision with terrain.NTSB WPR19LA071Accident · 1 fatalClass 3 · LimitedFinal reportBell 206 · Ashland, ORThe pilot's decision to continue visual flight into deteriorating weather, which resulted in an encounter with instrument meteorological conditions and spatial disorientation leading to a loss of control.NTSB ERA18LA020Accident · Minor injuriesClass 3 · LimitedFinal reportBell 206 · Union City, TNThe pilot’s inadvertent slope landing and attempted recovery, which resulted in an incipient dynamic rollover, mast bumping, and separation of the main rotor.NTSB CEN17FA355Accident · 1 fatalField investigationFinal reportBell 206L 3 · Ancho, NMThe pilot's distraction by a cell phone during a low-altitude flight, which resulted in controlled flight into terrain.NTSB ERA16LA015Accident · No injuriesLimited investigationFinal reportBell 206L 3 · Dickinson, ALThe improper installation by company maintenance personnel of the securing hardware of a tail rotor driveshaft section, which resulted in that section of tail rotor driveshaft disconnecting and a complete loss of tail rotor thrust.NTSB ERA15LA218Accident · No injuriesLimited investigationFinal reportBell 206L-3 · Kearny, NJThe deliberate concealment and reuse of an unairworthy tail rotor driveshaft by unknown personnel, which resulted in an overstress separation at a bonded flange adapter as a result of driveshaft imbalance.NTSB CEN15LA229Accident · No injuriesLimited investigationFinal reportBell 206L 3 · Chesterfield, MOThe collision of the helicopter's skid shoe with the runway centerline light during landing, which abruptly stopped the helicopter and resulted in damage to the fuselage.NTSB CEN14FA122Accident · 3 fatalField investigationFinal reportBell 206L 3 · Silt, COThe pilot’s inadequate preflight planning for a low-level aerial surveillance flight of power transmission lines, which led to his being unaware of the crossing power line while flying toward the sun and his subsequent failure to maintain sufficient clearance…NTSB CEN14FA004Accident · 1 fatalField investigationFinal reportBell 206L 3 · Venice, LAA total loss of engine power due to the liberation of a second stage turbine blade near the blade root due to a high-cycle fatigue crack and subsequent overload. Although extensive testing and materials analysis was performed, the reason for crack initiation…NTSB CEN13TA535Accident · Minor injuriesFinal reportBell 206L-3 · Amistad, NMThe pilot's failure to arrest the descent following an abrupt maneuver to avoid birds, which resulted in an impact with terrain.NTSB WPR13LA303Accident · Serious injuriesLimited investigationFinal reportBell 206L-3 · Missoula, MTThe pilot's failure to prevent the helicopter from settling with power and to maintain proper position relative to an external load, which resulted in a loss of control and subsequent hard landing.NTSB CEN12CA191Accident · No injuriesData collectionFinal reportBell 206L-3 · Southern Timbalier 52CAThe pilot’s inadequate preflight inspection when he did not remove a tie-down strap prior to takeoff, which resulted in a dynamic rollover.NTSB ERA12CA095Accident · No injuriesData collectionFinal reportBell 206L-3 · Wingate, NCThe certified flight instructor did not select an adequate landing site for the practice autorotation.NTSB CEN11LA252Accident · Minor injuriesLimited investigationFinal reportBell 206L-3 · (Gulf of Mexico)The loss of engine power due to an engine compressor stall as a result of ingesting methane gas during takeoff.NTSB ERA11CA082Accident · Serious injuriesData collectionFinal reportBell 206L-3 · Canal Point, FLThe pilot's failure to maintain clearance from the ground while maneuvering at a low altitude. Contributing to the accident was the pilot’s fatigue.NTSB WPR10LA359Accident · Serious injuriesLimited investigationFinal reportBell 206 · Wells, NVThe pilot's failure to maintain terrain clearance while maneuvering after departure from mountainous terrain.NTSB CEN10IA314Incident · Minor injuriesIncident investigationFinal reportBell 206L-3 · Gulf of MexicoA suspected failure of the tail rotor for undetermined reasons. A contributing factor was the failure of the emergency floats to properly inflate due to improper installment and inspection by maintenance personnel.NTSB ERA09CA485Accident · No injuriesData collectionFinal reportBell 206L-3 · White Plains, NYThe pilot's failure to disconnect the ground power unit prior to takeoff.NTSB CEN09IA254Incident · No injuriesIncident investigationFinal reportBell 206 · Vick, TXUndetermined.NTSB NYC08FA071Accident · 3 fatalField investigationFinal reportBell 206L-3 · Cherokee, ALThe pilot's failure to maintain control of the helicopter during an out-of-ground-effect hover. Contributing to the accident was a loss of tail rotor effectiveness.NTSB DFW07LA169Accident · No injuriesLimited investigationFinal reportBell 206L-3 · High Island 138The loss of control as result of the pilot's failure to maintain rotor RPM during takeoff.NTSB SEA06CA161Accident · No injuriesData collectionFinal reportBell 206L-3 · Salt Lake City, UTThe failure of the pilot to maintain clearance by allowing the helicopter to drift backwards, resulting in its tail rotor striking a hangar.NTSB DEN06LA096Accident · Minor injuriesLimited investigationFinal reportBell 206L-3 · Taos, NMthe loss of tail rotor effectiveness during landing, and the pilot's delayed remedial action to counteract a right yaw, which resulted in a loss of directional control and collision with terrain. A contributing factor was the pilot's failure to perform…NTSB SEA06LA121Accident · Minor injuriesLimited investigationFinal reportBell 206L · Vernal, UTThe loss of tail rotor effectiveness during an attempted precationary landing after a takeoff over uneven, sloping, brush-covered terrain. Factors include the pilot using the wrong performance chart while completing his preflight performance calculations, the…NTSB DFW06IA145Incident · 1 fatalIncident investigationFinal reportBell 206L-3 · Grand Isle 43AAThe pilot's incapacitation and death due to pre-existing cardiac disease.NTSB DFW06FAMS1Accident · 3 fatalMissing aircraftFinal reportBell 206-L3 · Gulf of MexicoUndetermined. The aircraft is missing.NTSB DFW05CA213Accident · No injuriesData collectionFinal reportBell 206L · Gulf of MexicoThe pilot's failure to maintain clearance with a stationary object while landing.NTSB CHI05GA198Accident · Serious injuriesFinal reportBell 206L-3 · Justice, ILThe pilot's improper in-flight decision while maneuvering which resulted in a tailwind during low airspeed helicopter flight and subsequent loss of tail rotor effectiveness. The struck sign and fence were factors in the accident.NTSB CHI05CA156Accident · Minor injuriesData collectionFinal reportBell 206L-3 · Algonac, MIThe pilot not maintaining helicopter control, the loss of tail rotor effectiveness he encountered, and his not maintaining clearance from objects during the approach. Factor were the low altitude, the transmission lines, and the garage.NTSB DFW05LA074Accident · No injuriesLimited investigationFinal reportBell 206L-3 · Cameron, LAFuel starvation due to a blocked and collapsed fuel nozzle screen, resulting from a contaminated fuel source/facility. Factors were the inadequate maintenance/inspection of fuel sources, and the lack of suitable terrain (high sea state) for the forced landing…NTSB LAX04LA216Accident · Minor injuriesLimited investigationFinal reportBell 206L-3 · Palmdale, CAThe momentary loss of engine power for undetermined reasons.NTSB FTW04LA088Accident · Minor injuriesLimited investigationFinal reportBell 206L-3 · W. Cameron 149A partial loss of engine power due to undetermined reasons. A contributing factor was the emergency floats not being deployed.NTSB FTW04FA007Accident · 3 fatalField investigationFinal reportBell 206L-3 · W. Cameron 509The pilot's loss of control following an inadvertent encounter with adverse weather conditions. Contributing factors were the prevailing thunderstorms, the low ceilings, and the miscommunication between the pilot and the company's communication center in…NTSB CHI03FA259Accident · 3 fatalField investigationFinal reportBell 206L-3 · E.I. 276, LAThe inadequate compensation for crosswind conditions and the directional control not obtained/maintained by the pilot during takeoff. Contributing factors were the crosswind and the planned approach to position the helicopter with a crosswind in order to…NTSB LAX03GA244Accident · 2 fatalFinal reportBell 206L-3 · Whiteriver, AZThe pilot's failure to maintain a minimum translational lift airspeed while maneuvering in high density altitude conditions at near maximum required torque and above the in ground effect hover altitude, that resulted in a loss of tail rotor effectiveness and…NTSB DEN02LA101Accident · Serious injuriesLimited investigationFinal reportBell 206L-III · Canon City, COthe pilot's failure to maintain clearance of a static wire, and the subsequent loss of aircraft control due to the main rotor pitch change tubes being severed.NTSB NYC02LA083Accident · No injuriesLimited investigationFinal reportBell 206-L3 · New York, NYThe pilot's improper flare while landing, which resulted in a collision with a concrete curb.NTSB FTW02LA102Accident · No injuriesLimited investigationFinal reportBell 206L-3 · Oakley, UTThe loss of engine power for an undetermined reason. A contributing factor was the lack of suitable terrain for the forced landing.
Back to Bell 206L-3