NTSB investigations: Continental TSIO-520 series, WY
31 cases on aircraft whose registry engine model is Continental TSIO-520 series. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1973 | 1 |
|---|---|
| 1976 | 1 |
| 1977 | 1 |
| 1978 | 1 |
| 1981 | 1 |
| 1982 | 1 |
| 1983 | 1 |
| 1984 | 3 |
| 1985 | 1 |
| 1986 | 1 |
| 1989 | 1 |
| 1990 | 1 |
| 1993 | 1 |
| 1996 | 1 |
| 1998 | 1 |
| 2000 | 2 |
| 2001 | 1 |
| 2002 | 1 |
| 2004 | 1 |
| 2005 | 1 |
| 2010 | 1 |
| 2011 | 1 |
| 2013 | 1 |
| 2015 | 1 |
| 2018 | 1 |
| 2021 | 2 |
| 2022 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'WY' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17040'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'WY' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17040'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR22LA253Accident · 2 fatalClass 3 · LimitedFinal reportCessna P210N · Buffalo, WYThe pilot’s decision to continue the visual flight rules flight into localized instrument meteorological conditions, which resulted in an encounter with convective turbulence and a subsequent loss of control and in-flight breakup.NTSB WPR21LA350Accident · No injuriesClass 3 · LimitedFinal reportCessna 404 · Sheridan, WYThe pilot experiencing an episode of impaired behavior and incapacitation for reasons that could not be determined based on the available information.NTSB WPR21LA345Accident · No injuriesClass 4 · LimitedFinal reportCessna 340 · Rock Springs, WYThe pilot’s improper pitch control during takeoff which resulted in an aerodynamic stall and subsequent hard landingNTSB CEN18LA373Accident · No injuriesClass 4 · LimitedFinal reportCessna T310 · Laramie, WYThe pilot’s failure to properly adjust the fuel/air mixtures, which resulted in a partial loss of engine power to both engines due to fuel starvation and a subsequent forced landing to a field.NTSB CEN15LA250Accident · No injuriesLimited investigationFinal reportCessna T188C · Pine Bluffs, WYThe pilot's loss of directional control to the right for reasons that could not be determined during examination of the right main landing gear wheel and brake drum.NTSB WPR13LA132Accident · No injuriesLimited investigationFinal reportCessna T310R · Casper, WYThe separation of the right main gear bracket assembly from its wing attachment fitting due to lack of lubrication of the torque tube bearing.NTSB WPR11LA434Accident · Serious injuriesLimited investigationFinal reportCessna T210M · Saratoga, WYA loss of engine power during an attempted go-around for reasons that could not be determined because postaccident examination did not reveal any anomalies that would have precluded normal operation.NTSB WPR11LA038Accident · No injuriesLimited investigationFinal reportCessna T210N · Baggs, WYThe failure of a connecting rod cap retaining bolt during cruise flight, which resulted in a loss of engine power.NTSB DEN05LA057Accident · No injuriesLimited investigationFinal reportCessna P210N · Lander, WYthe loss of engine power for undetermined reasons. A contributing factor was the lack of suitable terrain for the forced landing.NTSB DEN04LA107Accident · No injuriesLimited investigationFinal reportCessna P210N · Douglas, WYthe failure of the engine's crankshaft due to the rotation of the engine's number two bearing, which resulted in the oil starvation of the crankshaft's number 2 main journal. Contributing factors include the engine's improper maintenance, and the in-flight…NTSB DEN03FA002Accident · 1 fatalField investigationFinal reportCessna T210M · Laramie, WYthe pilot's improper inflight planning/decision, and his failure to maintain terrain clearance while attempting a low altitude maneuver. Contributing factors were the mountainous terrain, the airplane’s low altitude, and the pilot's lack of total instrument…NTSB DEN02TA011Accident · No injuriesFinal reportCessna 206 · Casper, WYfailure to maintain aircraft control during landing. Contributing factors were the crosswind and gusting wind conditions.NTSB DEN00LA094Accident · No injuriesLimited investigationFinal reportCessna T210M · Laramie, WYThe pilot-in-command's failure to confirm, the landing gear was down and locked. Factors were the check pilot's failure to confirm the landing gear was down and locked, and the sun glare.NTSB DEN00LA055Accident · No injuriesLimited investigationFinal reportCessna P210N · Gillette, WYThe pilot's failure to land sooner to refuel, resulting in a power loss due to fuel exhaustion. A factor was a lack of suitable terrain on which to make a forced landing.NTSB FTW98LA374Accident · No injuriesLimited investigationFinal reportBeech B36TC · Pinedale, WYThe pilot not following his Pilot Operating checklist procedures. A factor was the aborted landing which interfered with the pilot's normal traffic pattern habit.NTSB SEA97FA033Accident · 1 fatalField investigationFinal reportBeech B36TC · Jackson, WYfailure of the pilot to follow IFR procedures. High terrain, low ceiling, icing conditions, and a possible anomaly with the VOR were related factors.NTSB SEA93LA177Accident · Serious injuriesLimited investigationFinal reportCessna T210L · Cheyenne, WYAn undetermined loss of engine power.NTSB SEA91LA009Accident · No injuriesLimited investigationFinal reportCessna T210N · Laramie, WYThe pilot did not properly set the mixture control.NTSB DEN90LA026Accident · Minor injuriesLimited investigationFinal reportCessna T210L · Gillette, WYForced landing in unsuitable terrain as a result of an engine crankshaft failure at low level cruise flight.NTSB DEN87LA009Accident · No injuriesLimited investigationFinal reportCessna TU206G · Greybull, WYThe plt departed aurora, co at 1000 en route to great falls, mt at 8000 ft MSL. At 1237 the plt advised worland fss that the eng had lost power and he was going down. The plt said that on final apch he had to pull up to avoid power lines. The acft stalled and…NTSB DEN85LA249Accident · Serious injuriesLimited investigationFinal reportCessna TU206G · Evanston, WYThe plt said the eng quit as he was turning from base leg to final apch for rwy 24 at Evanston (WY) arpt. The acft crashed as the plt maneuvered for an emerg landing. Disassembly and examination of the eng disclosed no reason on why the engine failed. The…NTSB DEN85FA017Accident · Serious injuriesField investigationFinal reportCessna 414 · Cheyenne, WYThe acft collided with the ground during a turn to final from a circling approach (IFR) at Cheyenne airport. According to ATC, the acft was a VFR 'pop up' & was subsequently issued an IFR clearance for an approach into the airport. Examination of the acft at…NTSB DEN84FA122Accident · Serious injuriesField investigationFinal reportCessna 414A · Douglas, WYDuring an approach for a downwind landing, the acft stalled & impacted the ground 192 ft short of rwy 28. The plane had encountered icing conditions during flt & ice was still adhering to the acft as the plt made an approach for landing. Instrument conditions…NTSB DEN84FA071Accident · No injuriesField investigationFinal reportCessna 310Q · Casper, WYThe plt stated he was told, the r aux fuel pump was inop & to prime/start the r eng, he had to position the r fuel selector (sel) to x-feed. On the 1st 2 legs of the flt, he used this procedure, but noted the r fuel sel was hard to move. While starting for…NTSB DEN83LA125Accident · No injuriesLimited investigationFinal reportCessna TU206 · Evanston, WYAfter departing Evanston the plt encountered adverse wx about 100 mi east & returned to Evanston. The plt executed a go-around from a rwy 34 approach due to unfavorable winds & then landed on rwy 16. Directional control was lost & the acft collided with a…NTSB DEN83LA003Accident · No injuriesLimited investigationFinal reportCessna TU206G · Rock Springs, WYThe aircraft was being used for transportation to an oil drilling sight. A 1300 ft portion of a road near the sight was being used as a landing strip. The pilot reported that after the plane touched down and was rolling, it came to a dog leg in the road. He…NTSB DEN81FA020Accident · 1 fatalClosedCessna 206G · Cokeville, WYNTSB DEN78FA053Accident · 1 fatalClosedCessna TU206 · Canyon, WYNTSB DEN78DTC08Accident · No injuriesClosedCessna T210L · Thayne, WYNTSB DEN76DTC26Accident · Minor injuriesClosedCessna T210L · Afton, WYNTSB DEN74DTC01Accident · Minor injuriesClosedCessna T210 · Pinedale, WY