NTSB investigations: Bell 206B
55 cases on aircraft the registry lists as Bell 206B, where the sequence of events included Collision with terr/obj (non-CFIT). Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 2008 | 2 |
|---|---|
| 2010 | 2 |
| 2011 | 3 |
| 2012 | 7 |
| 2013 | 4 |
| 2014 | 2 |
| 2015 | 6 |
| 2016 | 5 |
| 2017 | 5 |
| 2018 | 3 |
| 2019 | 4 |
| 2020 | 3 |
| 2021 | 2 |
| 2022 | 4 |
| 2023 | 1 |
| 2024 | 1 |
| 2025 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1181511')
AND EXISTS (SELECT 1 FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s.case_mkey = x.case_mkey AND s.aircrafts_position = x.position AND s.\"tier2Number\" = '470' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE \"isDefiningEvent\")))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1181511')
AND EXISTS (SELECT 1 FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s.case_mkey = x.case_mkey AND s.aircrafts_position = x.position AND s."tier2Number" = '470' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE "isDefiningEvent")))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN25LA292Accident · No injuriesClass 4 · LimitedFinal reportBell 206B · North Bend, NEThe pilot’s failure to maintain clearance from wires while maneuvering at a low altitude, and the ground crew failure to inform the pilot that the support truck had been moved.NTSB CEN24LA368Accident · Serious injuriesClass 4 · LimitedFinal reportBell 206 · Lexington, NEThe pilot’s failure to maintain proper clearance from powerlines.NTSB CEN23LA279Accident · No injuriesClass 4 · LimitedFinal reportBell 206B · Chapman, KSThe pilot’s failure to maintain clearance from the power line during an agricultural application pass.NTSB WPR23LA004Accident · Serious injuriesClass 3 · LimitedFinal reportBell 206B · Fresno, CAThe disbond of a tail rotor drive shaft splined adapter, which resulted in a loss of tail rotor drive and a subsequent hard landing.NTSB ERA22FA383Accident · 2 fatalClass 3 · FieldFinal reportBell 206B · Whiteside, TNThe pilot’s failure to maintain clearance from the powerlines.NTSB ERA22LA330Accident · No injuriesClass 3 · LimitedFinal reportBell 206B · Kenton, OHThe pilot’s inadequate fuel management, which resulted in fuel exhaustion and a loss of engine power.NTSB WPR22LA221Accident · No injuriesClass 3 · LimitedFinal reportBell 206B · Stockton, CATail rotor blade impact with an unidentified object, which resulted in the loss of control and subsequent rollover of the helicopter.NTSB CEN22FA053Accident · 1 fatalClass 3 · FieldFinal reportBell 206 · Perry, OKA loss of lateral control during a hover that resulted in an impact with terrain. Based on the available evidence, the reason for the loss of lateral control could not be determined.NTSB ERA21FA130Accident · 4 fatalClass 3 · FieldFinal reportBell 206 · St Thomas, CBA total loss of engine power due to fatigue failure of two of the stage 3 compressor blades. Contributing to the failure of the compressor blades was the failure of maintenance personnel to inspect the compressor at the recommended interval for operation in…NTSB ERA21LA028Accident · Minor injuriesClass 3 · LimitedFinal reportBell 206 · Point Lookout, NYThe pilot’s decision to depart on a visual flight rules flight, and to continue that flight into forecasted and deteriorating instrument meteorological conditions (IMC) in a helicopter that was not equipped for flight in IMC, which resulted in the pilot’s…NTSB CEN20LA328Accident · 3 fatalClass 3 · LimitedFinal reportBell 206 · Marathon, TXThe in-flight loss of helicopter control for reasons that could not be determined based on the available evidence.NTSB WPR20CA162Accident · No injuriesClass 4 · Data collectionFinal reportBell 206 · Elko, NVThe pilot's failure to maintain helicopter control in gusting wind that resulted in a loss in altitude and subsequent collision with a fence.NTSB GAA19CA457Accident · Minor injuriesData collectionFinal reportBell 206 · Dukedom, TNThe pilot's failure to maintain clearance from wires during an agricultural application flight.NTSB WPR19LA135Accident · Serious injuriesClass 3 · LimitedFinal reportBell 206 · Oxnard, CAThe pilot’s inability to maintain control of the helicopter while maneuvering at a low altitude due to reasons that could not be determined based on available evidence.NTSB WPR19LA122Accident · No injuriesClass 3 · LimitedFinal reportBell 206 · Oakridge, ORA total loss of engine power following the failure of a 3rd stage turbine blade due to low- and high-cycle fatigue.NTSB WPR19TA061Accident · Serious injuriesClass 3Final reportBell 206 · Yuma, AZThe pilot's failure to maintain clearance from power transmission wires while flying at low altitude in nighttime conditions.NTSB GAA18CA512Accident · No injuriesClass 4 · Data collectionFinal reportBell 206 · Battle Mountain, NVThe pilot's failure to maintain the proper altitude and airspeed while flying in a canyon in gusting wind conditions.NTSB WPR18LA214Accident · Minor injuriesLimited investigationFinal reportBell 206 · Basin City, WAThe pilot's improper execution of a slowing and turning maneuver, which resulted in a loss of control at an altitude that was too low for recovery.NTSB GAA18CA352Accident · No injuriesData collectionFinal reportBell 206 · Orondo, WAThe pilot's failure to maintain clearance from power lines while maneuvering at low altitude.NTSB GAA17CA495Accident · No injuriesData collectionFinal reportBell 206 · Minden, NVThe pilot’s failure to maintain helicopter control during landing due to a loss of tail rotor effectiveness.NTSB GAA17CA393Accident · No injuriesData collectionFinal reportBell 206 · Dixon, KYThe pilot’s failure to see and avoid power lines while maneuvering at a low altitude. Contributing to the accident was the pilot’s failure to adequately identify hazards to flight during agricultural application operation planning.NTSB GAA17CA402Accident · No injuriesData collectionFinal reportBell 206 · Uniontown, KYThe pilot's failure to maintain adequate separation from power lines, which resulted in a loss of helicopter control.NTSB WPR17LA113Accident · Serious injuriesLimited investigationFinal reportBell 206B · Rockville, IDThe in-flight failure of the engine-to-transmission drive shaft due to a fatigue fracture of one of the KAflex flex frames caused by a loose bolt, which resulted in a total loss of engine power and a subsequent hard landing.NTSB ERA17TA170Accident · Serious injuriesFinal reportBell 206 · Orange Springs, FLThe pilot's failure to maintain adequate clearance between the helicopter's skid and the firefighting bucket and suspension cable, which resulted in the cable becoming entangled on the landing skid and a subsequent loss of helicopter control.NTSB WPR17LA019Accident · Serious injuriesLimited investigationFinal reportBell 206B · Yuma, AZThe pilot’s inability to maintain helicopter control after its skid got caught on the landing pad while he was maneuvering the helicopter to land on it, which resulted in a dynamic roll-over.NTSB GAA16CA405Accident · Minor injuriesData collectionFinal reportBell 206 · Outlook, WAThe pilot and ground crew's failure to visually inspect the helicopter's skids before takeoff, which resulted in a water hose becoming entangled on the right skid, a loss of control, an impact with terrain, and a post-crash fire.NTSB ERA16CA160Accident · No injuriesData collectionFinal reportBell 206 · Baltimore, MDThe pilot's inadequate compensation for the wind while hovering out of ground effect, which resulted in a loss of tail rotor effectiveness.NTSB GAA16CA165Accident · Minor injuriesData collectionFinal reportBell 206B · Hanford, CAThe pilot's decision to release the collective while flying at 10 feet above ground level, resulting in the rapid helicopter descent and impact with terrain.NTSB WPR16FA072Accident · 1 fatalField investigationFinal reportBell 206B · Honolulu, HIThe in-flight failure of the engine-to-transmission drive shaft due to improper maintenance, which resulted in low main rotor rpm and a subsequent hard landing to water.NTSB WPR16LA020Accident · Minor injuriesLimited investigationFinal reportBell 206B · Dallas, ORA loss of engine power for reasons that could not be determined based on the available information.NTSB GAA15LA296Accident · No injuriesLimited investigationFinal reportBell 206 · Ozark, ALThe pilot's failure to maintain clearance from terrain while hovering, which resulted in the helicopter's skid impacting terrain, subsequent abnormal airframe vibrations, and a hard landing during the subsequent hovering autorotation.NTSB CEN15LA423Accident · Serious injuriesLimited investigationFinal reportBell 206B · Woodville, TXThe loss of engine power due to water contamination in the fuel system. Contributing to the accident were the pilot’s inadequate preflight inspection of the fuel tanks and the operator’s inadequate inspection of the fuel supply truck that did not detect water…NTSB CEN15LA370Accident · No injuriesLimited investigationFinal reportBell 206B · Cresco, IAThe loss of engine power due to the high-cycle fatigue failure of the third-stage turbine wheel.NTSB GAA15CA102Accident · No injuriesData collectionFinal reportBell 206 - B11 · Caledonia, MIA loss of tail rotor effectiveness while maneuvering at low altitude, resulting in a collision with trees.NTSB ANC15CA012Accident · No injuriesData collectionFinal reportBell 206B · Palmer, AKThe pilot's failure to maintain control while hovering at a low altitude, which resulted in an impact with frozen lake ice. Contributing to the accident was the pilot's decision to operate the helicopter from the left seat contrary to the rotorcraft flight…NTSB CEN15CA007Accident · Serious injuriesData collectionFinal reportBell 206B · Atlanta, ARThe pilot's inadequate preflight inspection when he did not remove a tie-down strap prior to takeoff, which resulted in a dynamic rollover.NTSB WPR14CA319Accident · No injuriesData collectionFinal reportBell 206B · Salinas, CAThe pilot's failure to ensure adequate clearance from ground obstacles during takeoff which resulted in loss of aircraft control.NTSB WPR14CA041Accident · No injuriesData collectionFinal reportBell 206B · Superior, MTThe pilot's failure to maintain aircraft control while maneuvering during a long-line operation.NTSB WPR13LA287Accident · Serious injuriesLimited investigationFinal reportBell 206B · Royal City, WAThe pilot's failure to maintain clearance from netting material during a low pass over trees, which resulted in a loss of helicopter control.NTSB ERA13LA236Accident · No injuriesLimited investigationFinal reportBell 206B · Hartford, KYThe pilot’s failure to avoid a powerline that crossed a field that he was spraying. Contributing to the collision was the company’s failure to specifically mention that flight hazards be identified during a pre-work conference.NTSB WPR13CA204Accident · No injuriesData collectionFinal reportBell 206B · Wells, NVThe pilot's failure to maintain clearance from an obstacle while maneuvering at a low altitude.NTSB CEN13FA009Accident · 1 fatalField investigationFinal reportBell 206B · Crowley, LAThe pilot’s failure to maintain clearance from the broadcast tower guy-wires.NTSB WPR12CA236Accident · No injuriesData collectionFinal reportBell 206B · Burbank, WAThe failure of maintenance personnel to properly torque an air tube fitting, which resulted in a total loss of engine power.NTSB ERA12LA366Accident · No injuriesLimited investigationFinal reportBell 206B · Longboat Key, FLUnknown personnel's failure to comply with the engine manufacturer's engine fuel pump replacement guidance, which resulted in a total loss of engine power due to the engine fuel pump failure.NTSB CEN12LA282Accident · No injuriesLimited investigationFinal reportBell 206B-III · Flora, INThe pilot allowed the helicopter to settle with power.NTSB CEN12LA267Accident · Minor injuriesLimited investigationFinal reportBell 206B · Valley Falls, KSThe pilot’s inadequate compensation for the wind conditions during a hover maneuver, which resulted in a loss of tail rotor effectiveness.NTSB CEN12LA258Accident · Minor injuriesLimited investigationFinal reportBell 206B · Amarillo, TXThe pilot's failure to maintain helicopter control during landing in gusty wind conditions associated with a thunderstorm, which resulted in a loss of tail rotor effectiveness.NTSB WPR12CA183Accident · No injuriesData collectionFinal reportBell 206B · Arvin, CAThe pilot did not maintain clearance from power lines during low altitude maneuvering.NTSB WPR12LA036Accident · Serious injuriesLimited investigationFinal reportBell 206B · Woodburn, ORThe pilot’s failure to maintain ground clearance while maneuvering with an external load line.NTSB ERA12MA005Accident · 2 fatalMajor investigationFinal reportBell 206B · New York, NYThe pilot's failure to anticipate and correct for conditions (high gross weight, low indicated airspeed, and a right downwind turn) conducive to loss of tail rotor effectiveness (LTE), which resulted in LTE and an uncontrolled spin. Contributing to the…