Supplemental type certificates
49,114 STCs, most recently changed first. Search by what an STC changes, its holder or a model.
Query with SQL
duckdb -csv -c "SELECT stc_number, description, holder, status, status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' ORDER BY status_date DESC NULLS LAST, stc_number"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT stc_number, description, holder, status, status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' ORDER BY status_date DESC NULLS LAST, stc_number
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STC ST02316NYInstallation of Collins Elementary Surveillance capable TDR-94D Dual Mode-S Transponders and associated Collins CTL92E ControllerSTC ST04372CHInstallation of an Astronics Flight Deck Outlet w/ USB Power System in accordance with Astronics Armstrong Aerospace Master Data List, Document No. DC104-9847C-00, Revision E, dated April 5, 2019, or later FAA approved revision.STC ST04384CHReconfiguration of the Cabin Interior in accordance with StandardAero Master Data List 1035953, Revision (A), dated April 5, 2019 or later FAA approved revision.STC SA00792SEModify Cessna flap handleSTC SA610SWInstallation of Lycoming O-320 and O-360 series engine with Hartzell propeller.STC SE4725NMInstallation of an O-3000-A crankshaft, P/N 530860, equipped with an O-3000-D cluster fear, P/N 627846, in an O-3000-D engine.STC SA00104SEInstallation of automatic EPA fuel drain system.STC SA00155SEInstallation of one-piece aluminum lever/fitting on elevator servo tab.STC SA00234SEFabrication of Kenmore Air Harbor, Inc., wing strut fittingSTC SA00799SEInstall an air oil separatorSTC SA01131SEReplace existing Strut Assembly - Front FuselageSTC SA01387SEManufacture of alternate fuel selector valves for the main fuel tank and the wing tank positions (part numbers EFSA25-5KA and EFSA25-4KA, respectively)STC SA01569SEInterior reconfiguration to nine passenger seats for a Cessna 208B, serial number 208B0770.STC SA01683SEInterior reconfiguration to nine passenger seatsSTC SA02090SEFabrication of inside passenger door handleSTC SA02101SEFabrication of the Kenmore 70-Amp Alternator KitSTC SA02250SEInstallation of a Cleveland Wheel and Brake Kit Number 199-92,STC SA02427SEInstallation of floor panels, military style adjustable pilot and co-pilot seats, and cockpit shoulder harnessesSTC SA02542SEInstallation of a Lower Fuselage Tie Bar AssemblySTC SA02581SEInstallation of Kenmore Air Harbor, Inc., wing strut assemblySTC SA02604SEFabrication of Kenmore Air Harbor, Inc. windshield postsSTC SA1119NWInstallation of a Lycoming O-320-E2D engine and associated systems.STC SA111NWInstallation of McCauley 1A175-DM propeller with Cessna 0550162 spinner on Continental C-145 series and O-300 series engines.STC SA1629WEInstallation of left-hand door and associated fuel line routing and stabilizer trim cable changes. (PA-14 S/N 14-66, N4262H)STC SA1789NMInstallation of domed windows in cabin doors.STC SA199NWThis Certificate constitutes approval for the four overhead window configurationSTC SA2069NMInstallation of Continental IO-520 series engine modified per STC SE2068NM or Continental O-470-U engine modified per STC SE2107NM.STC SA21NWInstallation of a 70 pound baggage compartment in either or both EDO 89-2000, 89A-2000 or 689-2130 floatsSTC SA221NWInstallation of EDO model 249-2870 floats.STC SA2273WEInstallation of Cessna Model 206 rear seats.STC SA2303WEFloat door cover installation on EDO Model Numbers 249-2870, 249A-2870, and 628-2960 FloatsSTC SA2304WEFloat door cover installationSTC SA240NWInstallation of McCauley D3A32C90/ propeller, Cessna spinner, governor, and associated systems on Continental IO-520-D engine.STC SA262NWInstallation of 3-bladed McCauley D3A32C90/82NC-2 propeller, Cessna1250809 spinner, governor, and associated systems.STC SA271NWModify air induction system to engine by removing filter assembly and reinstalling filter wire mesh screen.STC SA284NWInstallation of a one-piece three-place center seatSTC SA312NWInstallation of EDO 628-2960 floats.STC SA361NWInstallation of large (8.5 x 6) tires on Cleveland WheelsSTC SA3684NMInstallation of Pratt & Whitney PT6A-135 engine and a Hartzell HC-B3TN-3DCY)/T10282+0 propeller.STC SA377NWInstallation of Hartzell HC-B3W30-2E/W10160R-6 and/or W10160-6 propellers, governors, and spinners on Pratt and Whitney R-985 series enginesSTC SA397NWRemove transport battery and battery box and install Gill 12-GCAB-9 or equal battery and battery box relocated to firewall per II K-8784.STC SA398NWInstallation of Hartzell HC-B3R30-4/ R10152-5 1/2 propeller, governor, and spinner (optional) on Pratt & Whitney R-985 series enginesSTC SA4-456Removal of Lycoming O-235-C1 engine and Installation of Lycoming O-320-A1A or one of the following optional Lycoming engines, O-310A1B, O-310-A2a, O-310-A2B, O-310-A2C, O-0320A2D, O-320-C1A, O-320-C1B, O-320-C2A, O-320-C2B, O-320-C2CSTC SA4025NMModification to increase the gross weight from 5110 lbs. on landplanes or 5090 lbs. on floatplanes to 5370 lbs.STC SA425NWInstallation of 75 lb. Capacity baggage compartment below the existing baggage compartment.STC SA426NWInstallation of enlarged baggage compartment and cargo doorSTC SA427NWInstallation of cabin access steps (attached to float struts)STC SA428NWInstallation of a water rudder steering system controlled by tail wheel steering bellcrank on float plineSTC SA4345NMInstallation of a one to nine passenger configuration.STC SA5160NMExtension of Bristol amphibious float model 348-4580.