NTSB investigations, TN
33 cases where NTSB found Landing gear system.
Cases per year
| 2008 | 2 |
|---|---|
| 2009 | 1 |
| 2010 | 2 |
| 2011 | 2 |
| 2012 | 4 |
| 2013 | 1 |
| 2014 | 2 |
| 2015 | 1 |
| 2016 | 2 |
| 2019 | 1 |
| 2020 | 2 |
| 2022 | 2 |
| 2023 | 3 |
| 2024 | 3 |
| 2025 | 5 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'TN' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010232'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'TN' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010232')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB ERA26LA028Accident · No injuriesClass 4 · LimitedFinal reportConsolidated Vultee 28-5ACF · Dayton, TNThe collapse of the left main landing gear due to the fatigue fracture of the lower landing gear actuator bolt.NTSB ERA25LA371Accident · Minor injuriesClass 4 · LimitedFinal reportNorth American T-6G · Rossville, TNThe pilot’s failure to adequately monitor the airplane’s path during takeoff toward the setting sun. Contributing was the undetected worn and fractured tailwheel locking pin.NTSB ERA25LA351Accident · No injuriesClass 4 · LimitedFinal reportPiper PA28R · Smyrna, TNThe pilot’s failure to extend the landing gear before landing.NTSB ERA25LA295Accident · No injuriesClass 4 · LimitedFinal reportCessna 195 · Memphis, TNFailure of the left main landing gear due to the loss of the protective paint coating and a change in the local surface finish from impermissible grinding, which resulted in fatigue cracking.NTSB ERA25LA135Accident · Minor injuriesClass 4 · LimitedFinal reportIcon A5 · Smithville, TNThe pilot’s failure to retract the landing gear prior to landing in water. Contributing to the accident was the pilot’s failure to use the manufacturer’s provided checklist.NTSB ERA24LA385Accident · No injuriesClass 4 · LimitedFinal reportCessna 195 · Dyersburg, TNFailure of the tailwheel strut, which resulted in a loss of directional control during landing roll and a runway excursion.NTSB ERA24LA255Accident · Minor injuriesClass 3 · LimitedFinal reportTitan T51 · Madisonville, TNThe failure of the right main landing gear weldment due to fatigue cracking.NTSB ERA24LA155Accident · Minor injuriesClass 4 · LimitedFinal reportSouth Central Searey · Knoxville, TNThe pilot’s failure to retract the landing gear of the amphibious airplane prior to a water landing.NTSB ERA24LA017Accident · No injuriesClass 4 · LimitedFinal reportAviat A1 · Tellico Plains, TNThe pilot's overapplication of brakes after landing long on a constrained runway and with a tailwind, which resulted in a nose-over.NTSB DCA24FA002Accident · No injuriesClass 2 · FieldFinal reportBoeing 757-236 · Chattanooga, TNThe failure of the alternate gear extension system, which prevented the landing gear from being lowered. The cause of the system failure was a broken wire, due to tensile overload, between the alternate gear extend switch and the alternate extension power…NTSB ERA23LA166Accident · No injuriesClass 4 · LimitedFinal reportBeech C35 · Cleveland, TNThe retraction of the landing gear after landing for unknown reasons.NTSB ERA22LA296Accident · No injuriesClass 4 · LimitedFinal reportAmerican Champion 8KCAB · Knoxville, TNThe inadequate maintenance of the left main landing gear through bolt, which resulted in a left main landing gear collapse and subsequent runway excursion during landing.NTSB ERA22LA230Accident · No injuriesClass 4 · LimitedFinal reportBeech C24 · Gallatin, TNA landing gear collapse due to the failure and/or separation of the pin in the right main landing gear.NTSB ERA20LA192Accident · No injuriesClass 3 · LimitedFinal reportBeech F90 · Knoxville, TNA failure of the left main landing gear scissors, which resulted in a landing gear collapse following a precautionary landing with the landing gear in an intermediate position..NTSB ERA20LA109Accident · Minor injuriesClass 3 · LimitedFinal reportRockwell 112 · Knoxville, TNA loss of directional control during landing following deflation of a flat-spotted tire for reasons that could not be determined based on available evidence.NTSB ERA19LA239Accident · No injuriesClass 3 · LimitedFinal reportCessna 210 · Chattanooga, TNThe improper maintenance of the airplane’s landing gear system, which resulted in a hydraulic fluid leak and insufficient pressure to extend and lock the landing gear during the accident flight.NTSB ERA16LA260Accident · No injuriesLimited investigationFinal reportSorensen Danny Pitts S1 S · Somerville, TNThe failure of the left landing gear leg due to fatigue, which resulted in a ground loop during landing. Contributing to the accident was the airplane builder's installation of a custom-built landing gear rather than the landing gear included with the…NTSB ERA16FA188Accident · 1 fatalField investigationFinal reportBeech D35 · Sevierville, TNThe pilot's failure to properly configure the landing gear and the pilot's inappropriate decision to abort the landing after the propeller had contacted the runway, which resulted in a loss of thrust and a subsequent loss of control of the airplane.NTSB ERA15LA333Accident · No injuriesLimited investigationFinal reportBeech E 90 · Fayetteville, TNA total loss of electrical power for reasons that could not be determined and the pilot's subsequent failure to properly follow the manual landing gear extension procedures, which resulted in the landing gear not extending.NTSB ERA14CA276Accident · Minor injuriesData collectionFinal reportSwearingen SA 226AT · Dayton, TNThe pilot's failure to extend the landing gear during the approach, which resulted in a gear-up landing.NTSB ERA14LA108Accident · No injuriesLimited investigationFinal reportEnstrom F 28A · Memphis, TNA skid tube clamp weld failure due to high residual stress, which resulted in a skid collapse during landing. Contributing to the accident was the airplane manufacturer’s lack of adequate guidance for periodically inspecting the skid tube clamp.NTSB ERA13LA312Accident · No injuriesLimited investigationFinal reportSchweizer G-164B · Jackson, TNA failure of the right main landing gear wheel rim during the landing roll, resulting in a loss of control and a subsequent collapse of the right main landing gear.NTSB ERA12CA408Accident · Minor injuriesData collectionFinal reportCessna 195B · Millington, TNThe pilot's failure to maintain directional control during the landing roll.NTSB ERA12LA299Accident · No injuriesLimited investigationFinal reportCessna 210 · Gatlinburg, TNFailure of the nose landing gear down pressure hose, which resulted in the main landing gear being unable to lock and collapse of the main landing gear during the landing roll.NTSB ERA12LA292Accident · Serious injuriesLimited investigationFinal reportMooney M20F · McKinnon, TNThe pilot's delayed decision to go-around after failing to recognize that he was attempting to land with a tailwind, and his failure to retract the landing gear and wing flaps for the go-around, which resulted in a collision with trees and terrain near the…NTSB ERA12CA232Accident · No injuriesData collectionFinal reportPiper PA-28R-180 · Dover, TNThe pilot's failure to maintain directional control during takeoff in gusty wind conditions, which resulted in a collision with an object and a landing gear collapse during the subsequent landing.NTSB ERA12CA047Accident · No injuriesData collectionFinal reportPiper PA-18-135 · Dyersburg, TNThe pilot's inadvertent excessive braking during the landing roll.NTSB ERA11CA482Accident · No injuriesData collectionFinal reportQuestair Venture · Memphis, TNThe pilot's inability to maintain directional control during landing with a flat tire. Contributing to the accident was the failure of the left main landing gear tire for undetermined reasons.NTSB ERA10CA201Accident · No injuriesData collectionFinal reportBeech 95-B55 (T42A) · Sevierville, TNThe pilot's inadvertent retraction of the landing gear on the ground during a touch-and-go landing.NTSB ERA10CA132Accident · No injuriesData collectionFinal reportSocata TBM 700 · Memphis, TNThe pilot’s failure to extend the landing gear before landing.NTSB ERA09CA327Accident · No injuriesData collectionFinal reportMeuer Mark SA900 V ST · Winchester, TNThe malfunction of the right brake during landing rollout.NTSB ERA09CA006Accident · No injuriesData collectionFinal reportBeech F17D · Moscow, TNThe mechanical failure of the landing gear actuation chain.NTSB MIA08LA185Accident · No injuriesLimited investigationFinal reportBellanca 17-30A · Sparta, TNFailure of the nose landing gear mount during a normal landing due to an improper weld.