Christen Industries A-1
NTSB investigations · 35
Matched to the registry by N-number and event date, newest first.
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
WHERE a.aircraft_model_code IN ('221020X')
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c."mKey" = a.case_mkey
WHERE a.aircraft_model_code IN ('221020X')
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB ANC22LA072Accident · Minor injuriesClass 4 · LimitedFinal reportChristen Industries A-1 · Point MacKenzie, AKThe pilot’s improper monitoring and failure to maintain airspeed during a critical phase of flight, which resulted in an exceedance of the airplane’s critical angle of attack, an aerodynamic stall, and subsequent impact with terrain.NTSB CEN21LA451Accident · Minor injuriesClass 4 · LimitedFinal reportChristen Industries A-1 · Eden Prairie, MNThe pilot’s failure to maintain directional control during the landing roll resulting in a ground loop.NTSB WPR21LA264Accident · No injuriesClass 4 · LimitedFinal reportChristen Industries A-1 · Twin Falls, IDPartial loss of engine power during a low pass, due to carburetor icing and the pilot’s failure to use carburetor heat during the landing approach.NTSB CEN21LA301Accident · No injuriesClass 4 · LimitedFinal reportChristen Industries A-1 · Wilmington, OHThe pilot’s failure to maintain directional control during takeoff with gusting winds, which resulted in an inflight collision with a fence.NTSB WPR21LA016Accident · Minor injuriesClass 4 · LimitedFinal reportAviat A1 · Moses Lake, WAThe pilot’s failure to maintain clearance from telephone wires while on final approach for landing which resulted in a collision.NTSB GAA17CA110Accident · No injuriesData collectionFinal reportChristen Industries A 1 · Milton-Freewater, ORThe pilot's decision to take off from unsuitable terrain with a tailwind, which resulted in a nose-over.NTSB GAA16CA080Accident · Minor injuriesData collectionFinal reportAviat A1 · Broadus, MTThe pilot's failure to maintain clearance from the wires while flying at a low altitude resulting in a wire strike, a loss of airplane control, and the consequent impact with terrain.NTSB WPR14CA276Accident · No injuriesData collectionFinal reportChristen Industries A 1 · Moses Lake, WAThe airplane impacted a bird during low level flight.NTSB ERA14LA305Accident · 1 fatalLimited investigationFinal reportChristen Industries A 1 · Tampa, FLThe pilot’s failure to maintain airplane control during initial climb after takeoff, which resulted in an uncontrolled descent into the ground.NTSB WPR11CA418Accident · Minor injuriesData collectionFinal reportChristen Industries A-1 · Dorris, CAThe pilot’s failure to maintain lateral aircraft control while taking off with a gusting crosswind.NTSB LAX08CA280Accident · No injuriesData collectionFinal reportChristen Industries A-1 · Wasco, ORThe pilot's failure to maintain directional control while landing.NTSB DFW08CA175Accident · No injuriesData collectionFinal reportChristen Industries A-1 · Pueblo, COThe pilot's failure to maintain directional control during landing. Contributing to the accident were the wind gust and tailwind.NTSB CHI07TA241Accident · Minor injuriesFinal reportChristen Industries A-1 · Elm Springs, SDThe pilot not maintaining clearance from the rising terrain. A factor contributing to the accident was the rising terrain.NTSB SEA07GA142Accident · 2 fatalFinal reportChristen Industries A-1 · Loa, UTThe pilot's failure to maintain an adequate airspeed during low altitude maneuvering flight that resulted in a stall. The pilot's decision to operate the airplane at a center of gravity beyond the rear limit, the low altitude of the flight, and the high…NTSB ANC06CA077Accident · No injuriesData collectionFinal reportChristen Industries A-1 · Takotna, AKThe pilot's excessive use of brakes during the landing roll. A factor associated with the accident was soft terrain.NTSB NYC06CA123Accident · No injuriesData collectionFinal reportChristen Industries A-1 · Linden, NJThe pilot's failure to maintain aircraft control during the engine run-up. Factor's in the accident were the pilot's diverted attention, and his failure to secure the airplane's left tire.NTSB LAX06LA147Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Creston, CAThe pilot's failure to maintain an adequate clearance from obstacles while intentionally flying at a low altitude.NTSB SEA05TA028Accident · Serious injuriesFinal reportChristen Industries A-1 · Terreton, IDThe pilot's failure to maintain adequate airspeed while maneuvering which resulted in an inadvertent stall and subsequent collision with terrain.NTSB ANC04LA071Accident · No injuriesLimited investigationFinal reportChristen Industries Husky A-1 · Bethel, AKThe pilot's failure to attain the proper touchdown point, which resulted in an in-flight collision with terrain during the ensuing aborted landing. A factor associated with the accident is the pilot's misjudgment of the airplane's speed and distance.NTSB CHI04LA100Accident · 1 fatalLimited investigationFinal reportChristen A-1 · Curtis, NEThe pilot's ostentatious display of a "hammerhead stall" during intial climb and his failure to maintain clearance from terrain. A factor was the post impact fire.NTSB CHI03LA091Accident · No injuriesLimited investigationFinal reportAviat A-1 · Cahokia, ILThe pilot’s inadequate compensation for wind and his failure to maintain directional control of the airplane which resulted in a ground loop. A factor associated with the accident was the gusty crosswind condition.NTSB CHI02LA290Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Chetek, WIThe pilot's failure to maintain directional control of the airplane, and his failure to maintain clearance from the utility pole. A factor was the utility pole.NTSB LAX99TA105Accident · No injuriesFinal reportChristen Industries A-1 · Battle Mountain, NVFailure of the pilot to maintain clearance from terrain. A factor was the dust devil encountered by the airplane.NTSB ANC98LA141Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 Husky · Selawik, AKThe pilot's inadequate compensation for the crosswind conditions. Factors in this accident were a crosswind, the pilot's lack of certification, and his inadequate fuel consumption calculations.NTSB MIA98FA039Accident · 1 fatalField investigationFinal reportChristen Industries A-1 · Lansing, NCthe pilot's failure to maintain clearance from a wire.NTSB MIA96LA081Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Miami, FLFailure of the pilot to maintain proper runway alignment during a go-around, resulting in a collision with trees beside the runway. The crosswind was a related factor.NTSB SEA96TA046Accident · Minor injuriesFinal reportChristen Industries A-1 · Lakeview, ORfailure of the pilot to maintain altitude/clearance from the terrain (snow covered, frozen lake). Factors relating to the accident were: the pilot's attention being diverted to a perceived safety hazard, and lack of visual cues for pilot perception of…NTSB ANC95LA069Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Tyonek, AKThe pilot's selection of an unsuitable landing site. A factor associated with the accident is the rough and uneven sandbar.NTSB MIA95LA092Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Opa Locka, FLCollapse of the tailwheel gear assembly, due to improper installation of a nut by maintenance personnel.NTSB FTW94T#A04Accident · No injuriesFinal reportChristen Industries A-1 · Tinnie, NMNTSB SEA94LA126Accident · No injuriesLimited investigationFinal reportChristen Industries Husky · Ogden, UTThe pilot's inadequate compensation for wind condiitons. The wind gusts were a factor.NTSB SEA94LA087Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Dutch John, UTThe pilot's inadequate compensations for wind conditions. The gusty crosswind was a factor.NTSB SEA91LA012Accident · No injuriesLimited investigationFinal reportChristen Industries A-1 · Afton, WYAn improper maintenance modification to disable the carburetor heat control by unknown personnel.NTSB LAX89FA239Accident · 1 fatalField investigationFinal reportChristen Industries A-1 Husky · Somerton, AZFailure of the pilot to maintain adequate airspeed, which resulted in a stall. The lack of altitude for recovery was a related factor.NTSB MIA88FA088Accident · Serious injuriesField investigationFinal reportChristen Industries A-1 · Pompano Beach, FLThe plt stated that as he pushed the control stick forward in an attempt to raise the tail, the acft violently pitched up, stalled and broke right, the right wing struck the ground, & the acft rolled over & came to rest inverted. Post crash examination of the…
Back to Christen Industries A-1