NTSB investigations: Continental TSIO-520 series, UT
42 cases on aircraft whose registry engine model is Continental TSIO-520 series. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1979 | 2 |
|---|---|
| 1981 | 2 |
| 1982 | 4 |
| 1984 | 1 |
| 1985 | 1 |
| 1990 | 1 |
| 1991 | 1 |
| 1992 | 2 |
| 1994 | 2 |
| 1995 | 1 |
| 1996 | 1 |
| 1997 | 1 |
| 2000 | 1 |
| 2001 | 3 |
| 2004 | 1 |
| 2005 | 1 |
| 2006 | 3 |
| 2007 | 2 |
| 2009 | 2 |
| 2010 | 1 |
| 2012 | 1 |
| 2013 | 1 |
| 2014 | 1 |
| 2017 | 1 |
| 2019 | 1 |
| 2020 | 2 |
| 2021 | 1 |
| 2026 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'UT' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17040'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'UT' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('17040'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR26LA311Accident · No injuriesClass 4 · LimitedFinal reportCessna T210M · Logan, UTThe pilot’s failure to extend the airplane’s landing gear before landing.NTSB WPR21LA078Accident · No injuriesClass 3 · LimitedFinal reportCessna P210N · Moab, UTThe pilot’s improper application of full throttle during takeoff, which resulted in loss of engine power due to an excessive fuel flow and overly rich fuel mixture.NTSB WPR20LA258Accident · Serious injuriesClass 3 · LimitedFinal reportCessna T210 · Hanna, UTThe pilot’s failure to maintain sufficient airspeed after a partial loss of power for undetermined reasons, which resulted in an exceedance of the airplane’s critical angle of attack and an aerodynamic stall from which the pilot could not recover.NTSB WPR20CA158Accident · No injuriesClass 4 · Data collectionFinal reportCessna P210 · Heber City, UTThe pilots failure to switch the fuel pump to the 'OFF' position during landing, resulting in a loss of engine power and subsequent collision with a fence during landing. Contributing to the accident was a modified before landing checklist which omitted the…NTSB WPR19LA195Accident · Serious injuriesClass 3 · LimitedFinal reportCessna T210 · Hurricane, UTMaintenance personnel's improper installation of a throttle cable to the throttle body arm, which resulted in a throttle detachment during takeoff and subsequent loss of power. Contributing to the accident was the inadequate inspection of the throttle…NTSB GAA17CA543Accident · No injuriesData collectionFinal reportCessna T210 · St George, UTThe pilot’s failure to extend the landing gear before landing.NTSB WPR14LA118Accident · No injuriesLimited investigationFinal reportCessna P210N · Bountiful, UTFuel starvation due to the in-flight loosening of the fuel lines attached to the fuel flow indicator as a result of inadequate maintenance.NTSB WPR14LA036Accident · No injuriesLimited investigationFinal reportCessna T210M · Scipio, UTA total loss of engine power during cruise flight for reasons that could not be determined because postaccident examination did not reveal any anomalies that would have precluded normal operation.NTSB WPR12LA190Accident · Serious injuriesLimited investigationFinal reportCessna T210 · Elberta, UTA loss of engine power for reasons that could not be determined because postaccident examination did not reveal any anomalies that would have precluded normal operation.NTSB WPR11FA073Accident · Serious injuriesField investigationFinal reportCessna T210M · Ogden, UTThe pilot did not maintain clearance from obstacles after descending below the published approach decision height when visibility was less than published approach minimums due to heavy ground fog and he did not execute a missed approach after failing to…NTSB WPR10LA092Accident · No injuriesLimited investigationFinal reportCessna 402C · Moab, UTThe pilot's decision to depart on a snow covered runway, which resulted in a loss of control and encounter with terrain. Contributing to the accident was the airport manager's failure to adhere to the Airport Certification Manual and close the runway due to…NTSB WPR09FA212Accident · No injuriesField investigationFinal reportCessna T210L · Moab, UTThe pilot's failure to lower the landing gear prior to landing. Contributing to the accident was the pilot's self-induced distraction by maneuvering on final to show a point of interest to passengers.NTSB SEA08FA045Accident · 3 fatalField investigationFinal reportBeech A36TC · Minersville, UTThe flying pilot's continued flight into instrument meteorological conditions and failure to maintain adequate terrain clearance during cruise. Contributing to the accident were low clouds, reduced visibility and mountainous terrain.NTSB SEA07FA124Accident · 1 fatalField investigationFinal reportCessna P210N · Spanish Fork, UTAn engine oil line leak and subsequent engine compartment fire while in cruise flight.NTSB SEA06LA185Accident · Minor injuriesLimited investigationFinal reportCessna T210M · Delta, UTA loss of engine power for an undetermined reason during cruise flight.NTSB SEA06CA180Accident · No injuriesData collectionFinal reportBeech B36TC · Cedar City, UTInadvertent collision with a deer during takeoff. A contributing factor was night conditions.NTSB DEN06FA065Accident · 1 fatalField investigationFinal reportCessna T310R · Heber City, UTthe pilot's loss of aircraft control due to the loss of engine power due to induction icing. Contributing factors include the in-flight encounter with structural icing, the severe turbulence, and the pilot's increased workload.NTSB DEN05LA110Accident · Minor injuriesLimited investigationFinal reportCessna TU206F · Vernal, UTThe pilot's failure to maintain aircraft control during takeoff. Factors contributing to the accident were the soft dirt airstrip, the low airspeed and the stall/mush.NTSB DEN04LA098Accident · No injuriesLimited investigationFinal reportCessna T210N · Spanish Fork, UTthe improper reassembly of the engine following major overhaul (application of Permatex over entire crankcase surfaces). Contributing factors included the number 2 main bearing and crankshaft shifting forward, causing the alternator drive shaft and other…NTSB DEN01LA131Accident · Minor injuriesLimited investigationFinal reportCessna T210M · Spanish Fork, UTthe pilot's inadequate compensation for the wind conditions which resulted in a loss of control during landing. A contributing factor was the gusty crosswind.NTSB DEN01LA102Accident · No injuriesLimited investigationFinal reportCessna T207A · Kanab, UTthe pilot's inadequate fuel consumption planning, and the subsequent fuel starvation, which resulted in a loss of engine power.NTSB DEN01LA087Accident · No injuriesLimited investigationFinal reportMooney M20K · Bountiful, UTthe failure of the airplane's electrical system for an undetermined reason, which resulted in the collapse of the left main gear on landing.NTSB DEN00LA077Accident · No injuriesLimited investigationFinal reportBeech A36TC · Monument Valley, UTFailure by the pilot to maintain control of the aircraft during landing roll. Factors were a dust devil/whirlwind and the pilot's lack of landing currency.NTSB FTW98TA051Incident · No injuriesFinal reportCessna P210N · Bryce Canyon, UTThe failure of the resistor (inverter) in the door seal pressurization air pump due to continuous operation. Factors were a failure in the door seal pressurization system, its inadequate design by the manufacturer, its inadequate written instructions for…NTSB SEA96LA102Accident · No injuriesLimited investigationFinal reportCessna T188C · Hooper, UTloss of engine power for undetermined reason(s). A factor relating to the accident was: the proximity of obstructions, which limited the pilot's ability to reach a suitable emergency landing area.NTSB SEA95FA095Accident · 6 fatalField investigationFinal reportCessna T210L · Milford, UTthe pilot's continued flight into known adverse weather (icing conditions), and his delay in executing a course reversal to exit those conditions, which resulted in airframe ice accumulation and loss of control. A factor was the icing conditions.NTSB FTW95FA003Accident · 2 fatalField investigationFinal reportCessna T210M · Richmond, UTThe loss of engine oil pressure due to an oil leak from a loose oil line fitting. Factors were the obscuration, and the unsuitable terrain at the pilot's disposal.NTSB SEA94LA063Accident · No injuriesLimited investigationFinal reportCessna TU206 · Salt Lake City, UTThe pilot's improper aircraft handling during the aborted takeoff.NTSB SEA92LA082Accident · No injuriesLimited investigationFinal reportBeech B36TC · Mona, UTA fatigue failure to the crankshaft and a manufacturing material defect.NTSB SEA92LA051Accident · No injuriesLimited investigationFinal reportBeech A36TC · Salt Lake City, UTThe pilot's inadvertent activation of the fuel boost pump. Factors to the accident were: poor aircraft preflight. Diverted attention, and inadequate remedial action.NTSB SEA91LA118Accident · No injuriesLimited investigationFinal reportBeech A36TC · Ogden, UTLoss of control by the pilot due to inadequate preflight planning and preparation which resulted in over gross weight aircraft loading. A factor relating to the accident was the high density altitude weather conditions.NTSB DEN90FA159Accident · 1 fatalField investigationFinal reportCessna P210R · Ogden, UTFailure of the #1 piston due to pre-ignition/detonation in the #1 cylinder, and inadequate visual lookout by the pilot (his failure to see-and-avoid the obstruction). The obstruction (power line) was a related factor.NTSB DEN86FA056Accident · 6 fatalField investigationFinal reportCessna T210L · West Valley, UTDuring apch to rwy 34L, the rt horizontal stab, elevators and wings separated in-flt. Investigation revealed the plt was not instr current. Ntap data revealed N2082S at an alt of 7,400 ft and 203 KTS grnd speed at outer marker. The mca at the marker is 6,100…NTSB DEN84LA092Accident · No injuriesLimited investigationFinal reportCessna T-210 · Duchesne, UTThe acft departed the side of the rwy during the landing roll. The plt stated that he could no determine where the center of the rwy was due to about 2 inches of fresh snow. The rt landing gear collapsed & the nose gear failed.NTSB DEN83FTM03Accident · 3 fatalFinal reportCessna T210M · Tremonton, UTThe acft was observed flying over the interstate highway approximately 100 ft AGL prior to colliding with two high voltage power transmission lines.NTSB DEN82DA096Accident · No injuriesFinal reportCessna TU206G · Price, UTThe aircraft encountered a dust devil shortly after touchdown during a landing on an unimproved area. The pilot reported that the dust devil moved the aircraft to the right and into a ditch.NTSB DEN82DA032Accident · Minor injuriesFinal reportCessna 210 · Blanding, UTThe pilot reported that the visibility was five miles when he landed. However, according to the airport manager, it was less than one mile with ground fog. During the landing, the left wing struck the ground when the plane touched down short of the runway…NTSB DEN82FA018Accident · 3 fatalField investigationFinal reportCessna T210N · 28 Mi Ene Ogden, UTDuring an IFR flt at 12,000 ft the plt contacted ATC & requested a higher altitude to get out of IMC. He was cleared to climb & maintain 14,000 ft. the plt acknowledged the clearance at 1855 & was not heard from again. Radar contact was lost at 1859.…NTSB DEN81FTM42Accident · No injuriesClosedCessna 340A · Vernal, UTNTSB DEN81FA042Accident · No injuriesClosedCessna TU206G · Cisco, UTNTSB DEN80FTM02Accident · Minor injuriesClosedCessna P210 · Fillmore, UTNTSB DEN79FA024Accident · 2 fatalClosedCessna T206 · Brigham City, UT