NTSB investigations: Bellanca 7GCBC
341 cases on aircraft the registry lists as Bellanca 7GCBC. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases, newest first
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1220601'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1220601'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR10LA406Accident · Serious injuriesLimited investigationFinal reportBellanca 7GCBC · Douglas, WYThe pilot's failure to maintain clearance from the terrain while maneuvering during an aerial observation flight.NTSB CEN10FA448Accident · 2 fatalField investigationFinal reportAmerican Champion Aircraft Cor 7GCBC · Midlothian, TXThe flight instructor’s incapacitation due to preexisting but unrecognized coronary disease, and the student pilot’s distraction and inability to recover the airplane from a stall/spin at low altitude.NTSB CEN10LA275Accident · 2 fatalLimited investigationFinal reportBellanca 7GCBC · Watertown, SDThe pilot's loss of airplane control while conducting aerobatic, low-altitude maneuvers. Contributing to the accident was the pilot's impairmant due to alcohol.NTSB ERA10LA101Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · St. Petersburg, FLA loss of engine power for undetermined reasons.NTSB ANC09CA108Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Fairbanks, AKThe pilot's failure to maintain control of the airplane during the landing roll at an off-airport site.NTSB ANC09CA006Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Skwentna, AKThe pilot's selection of unsuitable terrain for landing.NTSB LAX08CA297Accident · Minor injuriesData collectionFinal reportBellanca 7GCBC · American Fork, UTThe pilot's selection of an inadequate altitude to enter a box canyon, which resulted in an in-flight collision with terrain.NTSB SEA08CA169Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Helena, MTThe failure of the pilot receiving instruction to adequately compensate for the crosswind condition and failure to maintain directional control. Also causal was the flight instructor's delayed remedial action and inadequate supervision of the flight.NTSB ANC08LA082Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Chugiak, AKThe flight instructor's lack of remedial action to maintain directional control of the airplane during the landing roll, which resulted in a collision with a berm. Contributing to the accident was the pilot's failure to maintain aircraft control, and his lack…NTSB LAX08CA150Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Rockport, CAThe pilot's performance of VFR flight into IMC, resulting in failure to maintain terrain clearance. Contributing to the accident was the fog.NTSB ANC08LA058Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Tetlin, AKThe instructor pilot's inadequate supervision of the student, resulting in a loss of control while landing.NTSB LAX08CA044Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Exeter, CAThe pilot's failure to maintain directional control.NTSB DFW08CA023Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Arcola, TXThe loss of control as result of the pilot's failure to compensate for existing wind conditions while landing. A contributing factor was the gusty crosswind.NTSB MIA08FA003Accident · 1 fatalField investigationFinal reportBellanca 7GCBC · Newton, GAThe failure of the right wing wooden spar due while the airplane was in cruise flight, due to the mechanic's inadequate annual inspection and his failure to comply with an airworthiness directive.NTSB LAX07CA288Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Laurel, MTCorrosion and fatigue-induced failure of the landing gear structure.NTSB DEN07LA127Accident · Serious injuriesLimited investigationFinal reportBellanca 7GCBC · Basin, WYThe carburetor icing causing a partial loss of engine power, and the pilot's failure to maintain aircraft control leading to the inadvertent stall. A factor contributing to the accident was the conditions conducive for carburetor icing.NTSB LAX07CA128Accident · Minor injuriesData collectionFinal reportBellanca 7GCBC · Porterville, CAThe pilot's failure to maintain directional control.NTSB DFW06LA209Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Krum, TXThe CFI's and ATP's inflight decision to land halfway down the runway and the ATP's delayed decision to abort the landing. A factor was the ATP's excessive airspeed on final.NTSB NYC06LA167Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Toms River, NJCarburetor icing, and the pilot's delayed application of carburetor heat, which resulted in a loss of engine power, and subsequent force landing. A factor in the accident was carburetor icing conditions.NTSB CHI06LA012Accident · Serious injuriesLimited investigationFinal reportBellanca 7GCBC · Williams, MNThe pilot's failure to maintain airspeed which resulted in the airplane stalling. Factors associated with the accident were the low level at which the airplane was maneuvering and the pilot's failure to perform weight and balance calculations prior to the…NTSB ANC05FA144Accident · 2 fatalField investigationFinal reportBellanca 7GCBC · Nenana, AKThe pilot's failure to maintain minimum airspeed to avoid a stall while maneuvering, which resulted in a loss of control, a stall/spin, and impact with terrain. Factors associated with the accident were an aerobatic maneuver, and a stall/spin.NTSB ANC05LA093Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Anchorage, AKThe pilot's failure to maintain adequate airspeed during takeoff initial climb, which resulted in a loss of control and subsequent uncontrolled descent into a lake. A factor contributing to the accident was an inadvertent stall.NTSB LAX05LA204Accident · 1 fatalLimited investigationFinal reportBellanca 7GCBC · Woodfords, CAthe pilot's failure to maintain an adequate airspeed while turning in strong wind conditions, which resulted in a stall/spin. A factor in the accident was the high density altitude.NTSB ANC05CA067Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Palmer, AKThe pilot's selection of unsuitable terrain for landing, which resulted in a loss of control during the landing roll, and a collision with willows and a creek bank. A factor associated with the accident was the soft landing area.NTSB SEA05LA056Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Prineville, OROther maintenance personnel's inadequate reassembly of the tail wheel assembly and the left main landing gear breaking assembly resulting in an inadvertent loss of control during the landing roll. Contributing factors were the pilot's inadvertent swerve…NTSB LAX05CA005Accident · No injuriesData collectionFinal reportBellanca 7GCBC · Winslow, AZthe pilot's failure to maintain directional control during the landing rollout that resulted in a ground loop.NTSB SEA04LA069Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Marion, MTThe pilot's failure to maintain directional control during the landing roll. Contributing factors were the gust of wind and the snowbank.NTSB IAD03CA060Accident · Minor injuriesData collectionFinal reportBellanca 7GCBC · Atlantic City, NJThe pilot's failure to properly secure an aerial advertising banner to the outside of the airplane.NTSB LAX03LA159Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Reno, NVa loss of engine power for undetermined reasons.NTSB FTW03LA149Accident · Serious injuriesLimited investigationFinal reportBellanca 7GCBC · Houston, TXThe flight instructor's poor decision to initiate a simulated emergency without having a suitable area for a forced landing.NTSB SEA03LA004Accident · Minor injuriesLimited investigationFinal reportBellanca 7GCBC · Helena, MTThe student pilot's failure to maintain clearance from a tower during an aborted landing. Factors include landing with a tailwind and a tower.NTSB ANC02LA102Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Akiak, AKThe unsuitable and soft terrain in the area of a precautionary landing, which resulted in a nose over. Contributing factors in the accident were a false indication of smoke in the airplane during cruise flight, and weather conditions consisting of haze/smoke…NTSB ANC02LA059Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Wasilla, AKThe unqualified pilot's selection of an unsuitable landing site which resulted in an in-flight collision with a power line. Factors associated with the accident are the unqualified pilot's failure to see and avoid a power line, an unmarked power line, and…NTSB ANC02LA033Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Yakutat, AKThe collapse of the left main landing gear during the landing roll due to a fractured main gear leg strut.NTSB CHI02LA038Accident · Minor injuriesLimited investigationFinal reportBellanca 7GCBC · Hawley, MNthe failure of the pilot to maintain directional control. A factor was the trees.NTSB ANC01LA144Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Mentasta, AKThe pilot's inadequate compensation for wind conditions while landing. Factors associated with the accident were the pilot's inadequate recovery from a bounced landing, and a variable wind.NTSB CHI01LA306Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Pierre, SDThe pilot not maintaining directional control of the airplane during landing.NTSB LAX01LA189Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Reno, NVFailure of the left main landing gear axle due to an improper weld repair.NTSB ANC01LA037Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Fairbanks, AKThe flight instructor's inadequate supervision of the flight during the landing flare. A factor in the accident was the student's abrupt airplane control.NTSB NYC00LA187Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Wildwood, NJan improper flare by the pilot which induced an overload failure on the left side landing gear bolts. Factors were the corrosion on the bolts, and the failure of the operator to change the u-bolt in accordance with the manufacturer's recommendations.NTSB ANC00LA001Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Anchorage, AKThe pilot's inadequate preflight inspection to remove all contaminated fuel from the fuel system. A factor associated with the accident was an unsuitable terrain condition for landing.NTSB ANC99LA149Accident · Minor injuriesLimited investigationFinal reportBellanca 7GCBC · Fairbanks, AKThe pilot's inadequate compensation for wind conditions. Factors in the accident were a windshear, and a short runway area.NTSB SEA99LA154Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Columbus, MTThe pilot's failure to maintain directional control. A wet runway surface was a factor.NTSB CHI99LA098Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Grand Rapids, MNthe pilot's inadequate visual lookout. A factor to the accident was the unmarked transmission wire.NTSB FTW99LA037Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Stuttgart, ARThe separation of the left main landing gear bolt.NTSB ATL98LA081Accident · No injuriesLimited investigationFinal reportBellanca 7GCBC · Nicklesville, GAThe loss of engine power for undetermined reason. A factor was that weather conditions were favorable for the formation of carburetor ice.NTSB LAX98LA156Accident · 1 fatalLimited investigationFinal reportBellanca 7GCBC · Gorman, CAThe pilot's failure to maintain airspeed and an inadvertent stall while attempting to reverse direction in low cloud conditions in mountainous terrainNTSB ATL98LA071Accident · Serious injuriesLimited investigationFinal reportBellanca 7-GCBC · Sebring, FLThe pilot's improper handling of the airplane which led to an inadvertent stall. A factor was the loss of engine power for undetermined reasons.NTSB CHI98LA018Accident · Minor injuriesLimited investigationFinal reportBellanca 7GCBC · Rapid City, SDthe windshear, the pilot's inability to maintain the airplane's landing approach speed, and the inadvertent stall.NTSB FTW97FA348Accident · 2 fatalField investigationFinal reportBellanca 7GCBC · Telluride, COfailure of the pilot to maintain adequate airspeed, while climbing after takeoff, which resulted in an inadvertent stall/spin and collision with terrain. Factors relating to the accident included: the pilot allowing the maximum gross weight limit of the…